Issue |
MATEC Web Conf.
Volume 80, 2016
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes
|
|
---|---|---|
Article Number | 06004 | |
Number of page(s) | 5 | |
Section | MS6: From numerical modeling of forming processes down to in-use properties | |
DOI | https://doi.org/10.1051/matecconf/20168006004 | |
Published online | 24 October 2016 |
Modeling Metadynamic Recrystallization of a Die Steel during Ingot Breakdown Process
Department of Mechanical Engineering, École de Technologie Supérieure, Montréal, Canada
Ingot forging processes often consist of several successive deformation steps with high interpass times, during which metadynamic recrystallization (MDRX) occurs. Two-stage isothermal compression tests were carried out at 1150°C and 1200°C with strain rates of 0.25-2s−1 and interpass times of 5-25s. Based on the experimental results, a material model for MDRX is proposed. The constitutive model was implemented in Forge NxT 1.1® software to simulate the multistage compression. Results from the material model are consistent with the numerical analysis and experimental results.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.