Open Access
Issue
MATEC Web Conf.
Volume 80, 2016
NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes
Article Number 08002
Number of page(s) 6
Section MS8: Numerical modeling of additive manufacturing
DOI https://doi.org/10.1051/matecconf/20168008002
Published online 24 October 2016
  1. CW Holsapple, KD Joshi. Communications of the ACM, 45:42–7 (2002). [CrossRef] [Google Scholar]
  2. D Wu, A Håkansson. Procedia Computer Science, 35, 504–13 (2014). [CrossRef] [Google Scholar]
  3. R De Almeida Falbo, G Guizzardi, KC Duarte, Proceedings of the 14th international conference on Software engineering and knowledge engineering, ACM, 8, p. 351 (2002). [Google Scholar]
  4. R De Almeida Falbo, CS de Menezes, ARC da Rocha. Progress in Artificial Intelligence—IBERAMIA 98, Springer, 60 p. 349 (1998). [Google Scholar]
  5. F Ameri, C Urbanovsky, C McArthur, Proc. 7th International Conference on FOIS 2012, Graz, Austria, Citeseer (2012). [Google Scholar]
  6. NF Noy, DL McGuinness, and al., Stanford knowledge systems laboratory technical report KSL-01-05 and Stanford medical informatics technical report SMI-2001-0880 2001). [Google Scholar]
  7. S Staab, R Studer, H-P Schnurr, Y Sure, IEEE Intelligent Systems 16 26–34 (2001). [CrossRef] [Google Scholar]
  8. O-J Dahl, K Nygaard Communications of the ACM 9, 8 671 (1966). [CrossRef] [Google Scholar]
  9. A Kay Unpublished Master’s Thesis, University of Utah, Salt Lake City, UT, United States (1968). [Google Scholar]
  10. W Marsden, S Warde, E Cope, D Debon 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics; [Google Scholar]
  11. W Marsden, S Warde Granta Technical Paper (2010). [Google Scholar]
  12. J Munguía, J Lloveras, S Llorens, T Laoui International Journal of Production Research 48 2261–78 (2010). [CrossRef] [Google Scholar]
  13. GRANTA M. Granta Design Ltd. Cambridge, UK, www Grantadesign/products/mi [Google Scholar]
  14. N Gardan International Journal of Manufacturing Engineering (2014). [Google Scholar]
  15. N Gardan, A Schneider Journal of Manufacturing Systems. [Google Scholar]
  16. CB Williams, JK Cochran, DW Rosen Int J Adv Manuf Technol 53 231–9 (2010). [CrossRef] [Google Scholar]
  17. M Vesenjak Polymer Testing 29 991–4 (2010). [CrossRef] [Google Scholar]
  18. W Miller, CW Smith, F Scarpa, KE Evans Composites Science and Technology 70 1049–56 (2010). [CrossRef] [Google Scholar]
  19. Y Sugimura Mechanics of Materials 36 715–21 (2004). [CrossRef] [Google Scholar]
  20. D Prall, RS Lakes. International Journal of Mechanical Sciences 39 305–14 (1997). [CrossRef] [Google Scholar]
  21. H Abramovitch, M Burgard, L Edery-Azulay, KE Evans, M Hoffmeister, W Miller, et al. Composites Science and Technology 70 1072–9 (2010). [CrossRef] [Google Scholar]
  22. BR Barbero, ES Ureta Computer-Aided Design 43 188–206 (2011). [Google Scholar]
  23. A Schneider, JM Coulon, F Boyer, CB Machado, N Gardan, N Dey, et al. IEEE Conference: Computing for Sustainable Global Development (2015). [Google Scholar]
  24. J Kroll, S Botta, J Breuninger, A Verl vol. 8650, p. 11 (2013). [Google Scholar]
  25. A Schneider, N Gardan, J Gardan 21ème CFM (2013). [Google Scholar]
  26. K Swift, N Brown, Journal of Engineering Manufactured vol. 217 827–33 (2003). [CrossRef] [Google Scholar]
  27. UNM920. Fabrication additive Principes généraux Partie 2: vue d’ensemble des catégories de procédés et des matériaux de base (2015). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.