Open Access Using Support Vector Machine to Improve Ultrasonic Pulse Velocity Test for Concrete 01001 Tu Quynh Loan Ngo and Yu-Ren Wang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820701001 AbstractPDF (919.2 KB)References
Open Access Analysis of masonry arches reinforced with FRP sheets: experimental results and numerical evaluations 01002 Stefano Galassi Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820701002 AbstractPDF (826.6 KB)References
Open Access Economic-engineering design for logistics infrastructure routing 01003 Weerapol Namboonruang, Noppadon Amdee, Nutthanun Suphadon and Boontham Krisonsri Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820701003 AbstractPDF (674.4 KB)References
Open Access A Review on Early Age and Long-term Compressive Strength of High-volume Fly Ash Concrete 01004 Mu Li Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820701004 AbstractPDF (437.8 KB)References
Open Access Peak Discharge and Hydrograph Assessments Induced by Heavy Rainfall Events Using Tank Model 02001 Yen-Kun Hsu, Szu-Hsien Peng and Chiao-Wen Tsai Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702001 AbstractPDF (1.146 MB)References
Open Access Correction and accuracy improvement of non-parallel shear zone model 02002 Yaoke Wang, Meng Kou, Wei Ding, Huan Ma and Liangshan Xiong Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702002 AbstractPDF (1.292 MB)References
Open Access Design Analysis of Overhead Crane for Maintenance Workshop 02003 Siva Sitthipong, Chaiyoot Meengam, Suppachai Chainarong and Prawit Towatana Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702003 AbstractPDF (684.4 KB)References
Open Access Design and Analysis of a Wind Turbine Blade with Dimples to Enhance the Efficiency through CFD with ANSYS R16.0 02004 M. Rajaram Narayanan, S. Nallusamy and M. Ragesh Sathiyan Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702004 AbstractPDF (674.9 KB)References
Open Access Structural Failure Trends of the Assembly Welding Fixture for the Front Sidewall on the basis of Finite Element Analysis 02005 Duo Sun, Tianmin Guan and Lei Lei Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702005 AbstractPDF (488.4 KB)References
Open Access Kinematics Analysis of Multi-link Mechanism for Miniature Servo Press Based on Matlab 02006 Xinjian Lu Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702006 AbstractPDF (834.0 KB)References
Open Access Research on Several Tool Chuck Technology in High Speed Milling 02007 Zhenyu Zhao, Xiaomei Xu, Yongquan Zhou and Haibin Xiao Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702007 AbstractPDF (597.7 KB)References
Open Access Finite Element Analysis of Cylindrical Rubber Fender 02008 Chung-Ming Tan and Mau-Yiu Chang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702008 AbstractPDF (886.3 KB)References
Open Access Design and analysis of uptilted aerial ladder for fire truck format 02009 Zhi-Jian Tian, Xiang-Qin Han, Lei Xu, Li-Juan Yan, Chong-Yi Wei, Jie Li, Zhi-Song Hou and Wen-Guang Jiang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702009 AbstractPDF (587.9 KB)References
Open Access A Study on Laser Micromachining 02010 Sajjad Muhammad, Jithin Ambarayil Joy and Dong Won Jung Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820702010 AbstractPDF (502.6 KB)References
Open Access T-phase formation and its effect on mechanical properties of Al-Cu-Mn alloys 03001 SobanMuddassir Dar, HengCheng Liao and GuangJing Li Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703001 AbstractPDF (1.828 MB)References
Open Access Modelling of macrosegregation with mesosegregates in a binary metallic cast by the diffuse approximate meshless method 03002 Katarina Mramor, Vanja Hatić, Boštjan Mavrič and Božidar Šarler Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703002 AbstractPDF (1.736 MB)References
Open Access A Rolling Simulation System for Reversing Rolling Mills 03003 Umut Hanoglu and Božidar Šarler Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703003 AbstractPDF (983.2 KB)References
Open Access Use of Web technologies to create an information processing system of pressure metal forming processes 03004 Valentin A. Osadchy, Alexander V. Osadchy, Valeriy V. Savin, Lyudmila A. Savina and Nikolai V. Novoseltcev Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703004 AbstractPDF (292.5 KB)References
Open Access Novel Materials Synthesized from Red Mud, Bagasse, and Bentonite for Gas Treatment by CO2 Absorption 03005 Nguyen Hoc Thang, Nguyen Hoang Luong Ngoc, Vo Thi Nha Uyen and Pham Trung Kien Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703005 AbstractPDF (754.5 KB)References
Open Access Performance analysis of the bump beams made of High Strength Steel and Carbon Fiber reinforce plastics 03006 Yi Yao, Quan Yuan and Sihuan Fu Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703006 AbstractPDF (424.4 KB)References
Open Access A Study on Proposal of Flank Wear Criterion by Using a Built-in Current Sensor when Manufacturing the Mold Materials in a Smart Machine Tool 03007 Seung-Yub Baek, Sung-Taek Jung and Dae-Yu Park Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703007 AbstractPDF (731.8 KB)References
Open Access Study of feature extraction method of multi-information source for continuous casting process parameters 03008 Xianqi Liang, Zhufeng Lei, Wenbin Su, Zhong Fali, Hang Zhao, Yanni Zheng and Mingjie Ding Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703008 AbstractPDF (759.6 KB)References
Open Access Development and Application of Lightweight High Strength Organic Materials 03009 Yang Zhang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703009 AbstractPDF (231.6 KB)References
Open Access Development and Application of Lightweight High-strength Metal Materials 03010 He Pan Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703010 AbstractPDF (242.1 KB)References
Open Access Effect of impact energy on wear behavior of high chromium white iron produced by liquid die forging 03011 B Qiu, S M Xing, Q Dong and H Liu Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703011 AbstractPDF (1.094 MB)References
Open Access Research on multidimensional loading device of material mechanical test 03012 Guohua Zhao, Dan Wang, Liangbao Liu, Rui Fanand and Rukun Mi Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703012 AbstractPDF (1.352 MB)References
Open Access Research on Capability Evaluation System for Elevator Inspector 03013 Kexi Fei, Qinqiao Zhou and Kai Huang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703013 AbstractPDF (246.7 KB)References
Open Access Safety evaluation for bridge crane based on FTA and AHP 03014 Shuai Fei, Xiangdong Li and Yali Fan Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703014 AbstractPDF (282.2 KB)References
Open Access Investigation of tribo-mechanical properties and structure of specimens obtained by selective laser melting of stainless steel powders 03015 Leonid Belyaev, Aleksey Zhdanov and Valentin Morozov Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703015 AbstractPDF (989.4 KB)References
Open Access The hot flow behavior of Al-2wt.%Cu-1wt.%Mn alloy based on Gleebe-3800 hot compression simulation 03016 JinLong Chen, Hengcheng Liao and Heting Xu Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703016 AbstractPDF (399.1 KB)References
Open Access Magnetic properties of silicon steel sheet core with different processing stress 03017 Toshiki Matsui and Kyyoul Yun Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703017 AbstractPDF (634.0 KB)References
Open Access A New Method of D-TDOA Time Measurement Based on RTT 03018 Junjie Zhou, LiangJie Shen and Zhenlong Sun Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703018 AbstractPDF (650.5 KB)References
Open Access Investigation on Damping Capacities of Spherical Mg2Si Magnesium Matrix Composites Prepared by Super-Gravity Method 03019 Yun-si Wang, Rui-long Niu, Fang-jia Yan, Dong-ping Duan and Xue-min Yang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703019 AbstractPDF (684.3 KB)References
Open Access Deep Drawing of a Ni-Ti Shape Memory Alloy Sheet 03020 Kuang-Jau Fann and Chun-Hao Chang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703020 AbstractPDF (1.159 MB)References
Open Access Synthesis and characterization of the novel color-tunable Eu/Tb(BPA)3phen composites 03021 Guangbo Xie, Zijun Zhang and Jingjing Zhang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703021 AbstractPDF (943.5 KB)References
Open Access Design and Fabrication of Friction Stir Welding Machine 03022 Jithin Ambarayil Joy, Muhammad Sajjad and Dong-Won Jung Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703022 AbstractPDF (924.5 KB)References
Open Access Surface modification of Cr‒Mo steel by new technology using high speed jet in water under ultrasonic irradiation 03023 Masataka Ijiri and Toshihiko Yoshimura Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703023 AbstractPDF (1.040 MB)References
Open Access Effective Recycling of Spent Auto Catalytic Converters by Using Electrochlorination Method 03024 Nikolay Samotaev, Andrey Antonov, Grigory Tsarev and Andreas Tietz Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703024 AbstractPDF (1.054 MB)References
Open Access Integrated Product and Process Development of Clutch Friction Material Using Quality Function Deployment Processes 03025 Zhengfeng Yan, Guangping Tu and Jiajun He Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820703025 AbstractPDF (668.2 KB)References
Open Access The FAC Experimental Research on Vapor-water Two-phase Flow Piping System of CAP1400 Secondary Loop 04001 Shenhui Zhai, Simin Pang, Jie Shao, Hongqing Zhu, Xian Zhang and Pengfei Liu Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704001 AbstractPDF (910.2 KB)References
Open Access New Nanocompoite Thermal Interface Materials Based on Graphene Flakes, Mesoscopic Microspheres and Polymers 04002 Alex A Dmitriev, Alex S Dmitriev and Inna Mikhailova Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704002 AbstractPDF (599.8 KB)References
Open Access Laser Micromilling Technology as a Key for Rapid Prototyping SMD ceramic MEMS devices 04003 Nikolay Samotaev, Konstantin Oblov and Anastasia Ivanova Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704003 AbstractPDF (863.6 KB)References
Open Access Problems of sodium using in pulsating heat pipe made from fused silica 04004 Radovan Nosek, Tatiana Liptáková, Libor Trško, Zuzana Kolková, Milan Malcho and Anna Kiiljan Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704004 AbstractPDF (1.117 MB)References
Open Access Welding Process Optimization of WELDOX960 High Strength Steel 04005 Min Hu Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704005 AbstractPDF (528.8 KB)References
Open Access Horizontal welding quality control of the CO2 gas shielded welding 04006 Zhi-ling Wang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704006 AbstractPDF (409.6 KB)References
Open Access Analysis and study on the thermodynamic performance of S-CO2 simple Brayton cycle 04007 Lei Sun, Lin Tao, Yonghui xie, Yuanjian Dang and Yongqing Wang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704007 AbstractPDF (692.0 KB)References
Open Access The Thermal Hydraulic Performance of Wavy PCHE with Different Materials and Geometric Parameters 04008 Yunzhu Li, Yonghui Xie and Di Zhang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704008 AbstractPDF (890.9 KB)References
Open Access Investigation of vibration characteristics for bladed-disks with dry friction nonlinearity 04009 Tianyuan Liu, Yonghui Xie and Di Zhang Published online: 18 September 2018 DOI: https://doi.org/10.1051/matecconf/201820704009 AbstractPDF (1.031 MB)References