EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 207 (2018) MATEC Web Conf., 207 (2018) 02004 References
Open Access
Issue
MATEC Web Conf.
Volume 207, 2018
International Conference on Metal Material Processes and Manufacturing (ICMMPM 2018)
Article Number 02004
Number of page(s) 5
Section Design and Optimization
DOI https://doi.org/10.1051/matecconf/201820702004
Published online 18 September 2018
  1. Lin Wang et al., State of the art in the Aeroelasticity of wind turbine blades: Aeroelastic modelling, Renewable and Sustainable Energy Reviews, 64, 195–210, (2016). [CrossRef] [Google Scholar]
  2. S. Nallusamy, Thermal conductivity analysis and characterization of copper oxide nanofluids through different techniques, Journal of Nano Research, 40, 105–112, (2016). [CrossRef] [Google Scholar]
  3. Suman Kumar Jha, S. Nallusamy and Sinha Akshat Diwakar, Future energy scenario in India - An essential overview, Pollution Research, 35(3), 595–599, (2016). [Google Scholar]
  4. S. Nallusamy, et al., Analysis of design features for inspection robot make use of concrete structures-An assessment, International Journal of Engineering Research in Africa, 17, 74–81, (2015). [CrossRef] [Google Scholar]
  5. S. Nallusamy, Characterization of epoxy composites with TiO2 additives and E-glass fibers as reinforcement agent, Journal of Nano Research, 40, 99–104, (2016). [CrossRef] [Google Scholar]
  6. Mohamed Khaled et al., Aerodynamic design and blade angle analysis of a small horizontal-axis wind turbine, American Journal of Modern Energy, 3(2), 23–37, (2017). [CrossRef] [Google Scholar]
  7. S. Nallusamy and N. Manikanda Prabu, Heat transfer enhancement analysis of Al2O>3-water nanofluid through parallel and counter flow in shell and tube heat exchangers, International Journal of Nanoscience, 16(5&6), 01–07, (2017). [CrossRef] [Google Scholar]
  8. S. Nallusamy and A. Karthikeyan, Synthesis and wear characterization of reinforced glass fiber polymer composites with epoxy resin using granite powder, Journal of Nano Research, 49, 01–09, (2017). [CrossRef] [Google Scholar]
  9. Karthikeyan and S. Nallusamy, Experimental analysis on sliding wear behaviour of aluminium-6063 with SiC particulate composites, International Journal of Engineering Research in Africa, 31, 36–43, (2017). [CrossRef] [Google Scholar]
  10. S. Nallusamy and G. Majumdar, Enhancement of overall equipment effectiveness using total productive maintenance in a manufacturing industry, Int. J. of Per. Engg., 13(2), 01–16, (2017). [Google Scholar]
  11. S. Nallusamy, Productivity enhancement in a small scale manufacturing unit through proposed line balancing and cellular layout, Int. Journal of Performability Engg., 12(6), 523–534, (2016). [Google Scholar]
  12. Murtagh, Basu and Broderick, Along-wind response of a wind turbine tower with blade coupling subjected to rotationally sampled wind loading, Engineering Structures, 27, 1209–1219, (2005). [CrossRef] [Google Scholar]
  13. S. Nallusamy and Saravanan, Enhancement of overall output in a small scale industry through VSM, line balancing and work standardization, Int. J. of Engg. Res. in Africa, 26, 176–183, (2016). [CrossRef] [Google Scholar]
  14. S. Nallusamy, Efficiency enhancement in CNC industry using value stream mapping, work standardization and line balancing, Int. Journal of Performability Engg., 12(5), 413–422, (2016). [Google Scholar]
  15. Suman Kumar Jha, S. Nallusamy and Sinha Akshat Diwakar, Future energy scenario in India-An essential overview, Pollution Research, 35(3), 595–599, (2016). [Google Scholar]
  16. S. Nallusamy, Enhancement of productivity and efficiency of CNC machines in a small scale industry using total productive maintenance, Int. J. of Engg. Res. in Africa, 25, 119–126, (2016). [CrossRef] [Google Scholar]
  17. Weijun Tian et al., Bionic design of wind turbine blade based on long-eared owl’s airfoil, Applied Bionics Biomechanics, 2017, DOI: 10.1155/2017/8504638, (2017). [Google Scholar]
  18. S. Nallusamy, Manoj Babu and N.M. Prabu, Investigation on carbon nanotubes over review on other heat transfer nano fluids, Int. Journal of Applied Engg. Research, 10(62), 112–117, (2015). [Google Scholar]
  19. S. Nallusamy, M.R. Narayanan and J. Logeshwaran, Synthesis and machining characterization of copper-multiwalled carbon nanotubes-graphene hybrid composite using SEM and ANOVA, Journal of Nano Research, 50, 105–115, (2017). [CrossRef] [Google Scholar]
  20. Xin Jin et al., Investigation into parameter influence of upstream deflector on vertical axis wind turbines output power via 3-dimensional CFD simulation, Renewable Energy, 115, 41–53, (2018). [CrossRef] [Google Scholar]
  21. S. Nallusamy et al., Reliability analysis of passenger transport vehicles in public sector undertaking, International Journal of Applied Engineering Research, 10(68), 843–850, (2015). [Google Scholar]
  22. S. Nallusamy, A proposed model for sustaining quality assurance using TQM practices in small and medium scale industries, Int. Journal of Engineering Research in Africa, 22, 184–190, (2016). [CrossRef] [Google Scholar]
  23. Xinzi Tang et al., A direct approach of design optimization for small horizontal axis wind turbine blades, Procedia CIRP, 36, 12–16, (2015). [CrossRef] [Google Scholar]
  24. S. Nallusamy and Adil Ahamed, Implementation of lean tools in an automotive industry for productivity enhancement A case study, Int. J. of Engg. Research in Africa, 29, 175–185, (2017). [CrossRef] [Google Scholar]
  25. S. Nallusamy, Frequency analysis of lean manufacturing system by different critical issues in Indian automotive industries, Int. Journal of Engineering Research in Africa, 23, 181–187, (2016). [CrossRef] [Google Scholar]
  26. P J. Schubel and Crossley, Wind turbine blade design, Energies, 5, 3425–3449, (2012). [CrossRef] [Google Scholar]
  27. S. Nallusamy, A review on the effects of casting quality, microstructure and mechanical properties of cast Al-Si-0.3Mg alloy, Int. Journal of Performability Engg., 12(2), 143–154, (2016). [Google Scholar]
  28. S. Nallusamy and A. Karthikeyan, Analysis of wear resistance, cracks and frictional properties of metal matrix composites with SiC additives and Al2O3 as reinforcement, Indian Journal of Science and Technology, 9(35), 01–06, (2016). [Google Scholar]
  29. Okulov et al., Experimental investigation of the wake behind a model of wind turbine in a water flume, J. of Physics, Conference Series, 555, DOI: 10.1088/1742-6596/555/1/012080, (2014). [Google Scholar]
  30. S. Nallusamy, Analysis of MRR and TWR on OHNS die steel with different electrodes using electrical discharge machining, International Journal of Engineering Research in Africa, 22, 112–120, (2016). [CrossRef] [Google Scholar]
  31. Galih Bangga et al., CFD studies on rotational augmentation at the inboard sections of a 10 MW wind turbine rotor, Journal of Renewable and Sustainable Energy, 9(2), 676–681, (2017). [Google Scholar]
  32. S. Nallusamy, et al., Analysis of static stress in an alloy wheel of the passenger car, International Journal of Engineering Research in Africa, 16, 17–25, (2015). [CrossRef] [Google Scholar]
  33. S. Nallusamy and G. Majumdar, Effect of stacking sequence and hybridization on mechanical properties of jute-glass fiber composites, Int. Journal of Performability Engg., 12(3), 229–239, (2016). [Google Scholar]
  34. Nikolaos Simisiroglou, Simon-Philippe Breton and Stefan Ivanell, Validation of the actuator disc approach using small scale model wind turbines, Journal of Physics, 753, 01–10, (2016). [Google Scholar]
  35. S. Nallusamy, Analysis of welding properties in FSW aluminium 6351 alloy plates added with silicon carbide particles, Int. Journal of Engineering Research in Africa, 21, 110–117, (2015). [CrossRef] [Google Scholar]
  36. S. Nallusamy, Characterization of Al2O3/water nanofluid through shell and tube heat exchangers over parallel and counter flow, Journal of Nano Research, 45, 155–163, (2017). [CrossRef] [Google Scholar]
  37. M. Rajaram Narayanan and S. Nallusamy, An experimental analysis of aluminium alloy with tungsten carbide metal matrix composite through insitu method using SEM, Rasayan Journal of Chemistry, 11(1), 355–360, (2018). [Google Scholar]
  38. S. Nallusamy, et al., Experimental analysis on reinforced aluminium metal matrix with boron carbide, graphite and fly ash composites, Rasayan Journal of Chemistry, 10(4), 1368–1373, (2017). [Google Scholar]
  39. Sarkar and Behera, Wind turbine blade efficiency and power calculation with electrical analogy, International Journal of Scientific and Research Publications, 2(2), 01–05, (2012). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.