Issue |
MATEC Web Conf.
Volume 207, 2018
International Conference on Metal Material Processes and Manufacturing (ICMMPM 2018)
|
|
---|---|---|
Article Number | 02005 | |
Number of page(s) | 4 | |
Section | Design and Optimization | |
DOI | https://doi.org/10.1051/matecconf/201820702005 | |
Published online | 18 September 2018 |
Structural Failure Trends of the Assembly Welding Fixture for the Front Sidewall on the basis of Finite Element Analysis
School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, Liaoning, China
a Duo Sun: sddjtu@163.com
The operating conditions of the assembly welding fixture for the front sidewall have been analyzed in this paper, and all the typical conditions have been applied with the nonlinear finite element analysis of the contact, aiming to ensure the safe utilization of the assembly welding fixture for the front sidewall of tooling equipment for the production of rail vehicles. The potentially risky component locations are predicted and the weak spots are discovered on the basis of the analysis results of the static strength. The anticipation of the component failure trends shows a guiding role in the failure prediction in actual production and facilitates accident prevention.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.