Open Access
MATEC Web Conf.
Volume 207, 2018
International Conference on Metal Material Processes and Manufacturing (ICMMPM 2018)
Article Number 02003
Number of page(s) 5
Section Design and Optimization
Published online 18 September 2018
  1. Haniszewski T., Strength analysis of overhead traveling crane with use of finite element method, J trans Prob. Vol. 9(1) (2014), p. 19–26. [Google Scholar]
  2. Pratik R, Patel V.K., A review on structural analysis of overhead crane girder using FEA technique, Int. j. innov. res. sci. eng technol. Vol. 2(4) (2013), p. 41–44. [Google Scholar]
  3. Alkin C, Imrak C.E, Kocabas H.J., Solid modeling and finite element analysis of an overhead crane bridge, Acta Polytech. Vol. 45(3) (2005), p. 61–67. [Google Scholar]
  4. Sankar V.V, Vijayan P. Ashraf M.Y., Reducing the structural mass of a real-world double girder overhead crane, Int. j. adv. eng. technol. Vol. 8(2) (2015), p. 150–162. [Google Scholar]
  5. Yifei T, Wei Y, Zhen Y, Dongbo L, Xiangdong L., Research on multidisciplinary optimization design of bridge crane, Math. probl. eng. (2013), p. 1–10. [CrossRef] [Google Scholar]
  6. Khalidurfeasif P, Bharti D., Finite element analysis of 450 t eot crane box girder, Int. j. adv. eng. res. dev. Vol. 2(11) (2015), p. 171–178. [Google Scholar]
  7. Kapadni R, Ganiger S.G., A review paper on design and structural analysis of simply supported gantry crane beam for eccentric loading, Int. res. j. eng. Technol. Vol. 2(8) (2015), p. 1622–1626. [Google Scholar]
  8. Vlada G, Mllorad M, Zoran., FEA Implementation in moving load problem at bridgr cranes, Mach des. (2010), p. 25–30. [Google Scholar]
  9. Vankatesh A, Vignesh S, Iyappan S, Kumar P, Tamilvanan G, Sarathy R., Design of an over head plate gantry girder, Int. j. dev. Res. Vol. 5(6) (2016), p. 7821–7823. [Google Scholar]
  10. Patel K, Jani V.K., J. inf. knowl. Design and dynamic analysis of 70 t double girder electrical overhead crane, Res. mech. eng. Vol. 2(2) (2013), p. 496–503. [Google Scholar]
  11. Nenad M, Rodolju., Analysis of overhead travelling crane’s motion in horizontal plane, Int. j. eng. (2016), p. 21–24. [Google Scholar]
  12. Bhutta M, Misbahuddin M, Qureshi M, Ahmad S, Mughal H., Using finite element analysis for design optimization of twin beam crane arm, Sci. int. Vol. 28(1) (2016), p. 131–138. [Google Scholar]
  13. Sitthipong S, Muangjunburee P, Detchvayukul, Totarat N, Stress analysis of swing shaft in the transmission system of electric shovel, Naresuan Phayao J. Vol. 9(4) (2016), p. 21–24. [Google Scholar]
  14. Sitthipong S, Muangjunburee P, Detchvayukul, Totarat N., Stress Analysis of Final Drive Pinion Shaft of Electric Shovel Through The Use of FEM, Thaksin. Uni. J. Vol. 20(1) (2017), p. 57–66. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.