MATEC Web of Conferences

Open Access

Timber frame houses resistant to dynamic loads - seismic analysis 01001

Marcin Szczepański and Wojciech Migda

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821901001

• Abstract
• PDF (3.537 MB)
• References

Open Access

System-reliability analysis of steel truss towers 02001

Wojciech Mochocki, Paulina Obara and Urszula Radoń

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902001

• Abstract
• PDF (743.7 KB)
• References

Open Access

Load carrying capacity of the eccentric joint in the truss made of open cross-sections 02002

Małgorzata Gordziej-Zagórowska and Elżbieta Urbańska-Galewska

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902002

• Abstract
• PDF (671.0 KB)
• References

Open Access

On modelling of the buckling resistance of welded I-section columns 02003

Radosław Szczerba, Marcin Gajewski and Marian Giżejowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902003

• Abstract
• PDF (819.7 KB)
• References

Open Access

Experimental study of mechanical properties of steel cables 02004

Renata Orzłowska

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902004

• Abstract
• PDF (722.8 KB)
• References

Open Access

Investigation of laser heat treated Monel 400 02005

Mateusz Kukliński, Aneta Bartkowska and Damian Przestacki

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902005

• Abstract
• PDF (691.6 KB)
• References

Open Access

Stability of roof trusses stiffened by trapezoidal sheeting and purlins 02006

Natalia Korcz-Konkol and Piotr Iwicki

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902006

• Abstract
• PDF (800.2 KB)
• References

Open Access

Influence of sheet/purlin fasteners spacing on shear flexibility of the diaphragm 02007

Natalia Korcz-Konkol and Elżbieta Urbańska-Galewska

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902007

• Abstract
• PDF (617.3 KB)
• References

Open Access

Comparative analysis of different numerical models of a steel radial gate 02008

Krzysztof Brusewicz and Robert Jankowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902008

• Abstract
• PDF (578.7 KB)
• References

Open Access

The buckling analysis of a cold-formed steel C-sectional column resting on an elastic foundation 02009

Patryk Deniziak and Piotr Iwicki

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902009

• Abstract
• PDF (536.2 KB)
• References

Open Access

Influence of nonlinearities on the efficiency and accuracy of FEM calculations on the example of a steel build-up thin-walled column 02010

Patryk Deniziak and Karol Winkelmann

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902010

• Abstract
• PDF (493.8 KB)
• References

Open Access

Study on 19th-century cast iron columns from the former financial office building in Kwidzyn 02011

Michał Kwasek, Aleksander Piwek and Robert Jankowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902011

• Abstract
• PDF (668.0 KB)
• References

Open Access

The influence of position of the post or its absence on the performance of the cable barrier system 02012

Dawid Bruski, Stanisław Burzyński, Jacek Chróścielewski, Łukasz Pachocki, Krzysztof Wilde and Wojciech Witkowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902012

• Abstract
• PDF (501.7 KB)
• References

Open Access

Comparison of theoretical deformation with real life model of a steel bridge span 02013

Karol Federowicz

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902013

• Abstract
• PDF (1.059 MB)
• References

Open Access

The influence of high tensile bolts tightening torque on stress distribution in the bolted connection of rockfall barrier under impact load 02014

Krzysztof Kuliński and Maciej Major

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902014

• Abstract
• PDF (792.2 KB)
• References

Open Access

Critical load of steel trusses - graphical methods 02015

Piątkowski Michał

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902015

• Abstract
• PDF (626.8 KB)
• References

Open Access

Analysis of load carrying capacity and destruction mechanism of an intermediate anchorage steel plate for pillar jib crane 02016

Małgorzata Gordziej-Zagórowska and Wojciech Migda

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902016

• Abstract
• PDF (775.1 KB)
• References

Open Access

Impact of single-layer dome modelling on the critical load capacity 02017

Paweł Zabojszcza, Urszula Radoń and Paulina Obara

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902017

• Abstract
• PDF (834.2 KB)
• References

Open Access

Investigation of natural frequencies of axially loaded thin-walled columns 02018

Łukasz Żmuda-Trzebiatowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902018

• Abstract
• PDF (675.2 KB)
• References

Open Access

Design procedure for steel column bases with stiffeners 02019

Marcin Górski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902019

• Abstract
• PDF (689.4 KB)
• References

Open Access

Dynamic analysis of temporary steel grandstand equipped with different types of bracing system 02020

Natalia Lasowicz and Tomasz Falborski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821902020

• Abstract
• PDF (434.3 KB)
• References

Open Access

Soil-structure interaction effects on modal parameters of office buildings with different number of stories 03001

Natalia Lasowicz and Tomasz Falborski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903001

• Abstract
• PDF (565.0 KB)
• References

Open Access

Simplified method of applying loads to flat slab floor structural model 03002

Maciej Tomasz Solarczyk and Andrzej Ambroziak

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903002

• Abstract
• PDF (1.165 MB)
• References

Open Access

Acoustic non-destructive testing of high temperature degraded concrete with comparison of acoustic impedance 03003

Richard Dvořák, Zdeněk Chobola and Ivo Kusák

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903003

• Abstract
• PDF (825.2 KB)
• References

Open Access

The effect of macro polymer fibres length and content on the fibre reinforced concrete 03004

Aleksandra Mariak and Marzena Kurpińska

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903004

• Abstract
• PDF (543.8 KB)
• References

Open Access

The experimental comparison of parameters signals of acoustic emission during destructive test on composites based on cement 03005

Michaela Hoduláková, Dalibor Kocáb, Libor Topolář and Barbara Kucharczyková

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903005

• Abstract
• PDF (503.1 KB)
• References

Open Access

Assessment of sulfur concrete properties for use in civil engineering 03006

Michał Lewandowski and Renata Kotynia

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903006

• Abstract
• PDF (561.2 KB)
• References

Open Access

Computational simulations of the cable-stayed bridge over the Vistula River in Krakow 03007

Michał Topolewicz and Krzysztof Topolewicz

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903007

• Abstract
• PDF (784.2 KB)
• References

Open Access

Maturity testing of 3D printing concrete with inert microfiller 03008

Szymon Skibicki, Maria Kaszyńska and Mateusz Techman

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903008

• Abstract
• PDF (544.0 KB)
• References

Open Access

Comparison of calculation models’ estimates with actual measured autogenous shrinkage in High-Performance Cement Composites 03009

Adam Zieliński, Karol Federowicz and Maria Kaszyńska

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903009

• Abstract
• PDF (611.7 KB)
• References

Open Access

On the influence of the acceleration recording time on the calculation of impact severity indexes 03010

Łukasz Pachocki, Dawid Bruski, Stanisław Burzyński, Jacek Chróścielewski, Krzysztof Wilde and Wojciech Witkowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903010

• Abstract
• PDF (593.0 KB)
• References

Open Access

Use of DMDA method for production of heavyweight concrete 03011

Mateusz Techman and Szymon Skibicki

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903011

• Abstract
• PDF (430.0 KB)
• References

Open Access

The SHM system as a data source for durability assessment. Case study of Rędziński Bridge stay cable system 03012

Marco Teichgraeber and Paweł Hawryszków

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903012

• Abstract
• PDF (1.187 MB)
• References

Open Access

Influence of selected additives and admixtures on underwater concrete and the environment 03013

Aleksandra Mariak, Lucyna Grabarczyk, Barbara Wojtasik and Małgorzata Zbawicka

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903013

• Abstract
• PDF (503.4 KB)
• References

Open Access

Use of radiography images and gray level co-occurrence matrix to investigate gravitational granular flow 03014

Selam Waktola, Krzysztof Grudzień, Maciej Niedostatkiewicz and Laurent Babout

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903014

• Abstract
• PDF (1.091 MB)
• References

Open Access

Verification of selected calculation methods regarding shear strength in beams without web reinforcement 03015

Marta Hirsz and Krystyna Nagrodzka-Godycka

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821903015

• Abstract
• PDF (407.3 KB)
• References

Open Access

Multi-criteria analysis of the construction technologies in the aspect of sustainable development 04001

Magdalena Gicala and Anna Sobotka

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904001

• Abstract
• PDF (422.4 KB)
• References

Open Access

The collusion detection in public procurements – selected methods applied for the road construction industry in Poland 04002

Andrzej Foremny and Hubert Anysz

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904002

• Abstract
• PDF (508.8 KB)
• References

Open Access

The Conjugated Triangle Method CTM of the detection of inconsistent bids in the construction industry 04003

Hubert Anysz and Krzysztof Kaczorek

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904003

• Abstract
• PDF (456.4 KB)
• References

Open Access

Predicting the impact of traffic–induced vibrations on buildings using artificial neural networks 04004

Anna Jakubczyk-Gałczyńska

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904004

• Abstract
• PDF (496.8 KB)
• References

Open Access

Multicriteria assessment of selected types of the single-layer exterior walls 04005

Piotr Plebankiewicz and Agnieszka Leśniak

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904005

• Abstract
• PDF (438.1 KB)
• References

Open Access

The criteria for evaluation and selection the best tender applied by the authorities in Poland and selected EU countries 04006

Beata Grzyl, Magdalena Apollo, Emilia Miszewska-Urbańska and Adam Kristowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904006

• Abstract
• PDF (406.9 KB)
• References

Open Access

Simulation Method for Scheduling Linear Construction Projects Using the Learning– Forgetting Effect 04007

Łukasz Rzepecki and Sławomir Biruk

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904007

• Abstract
• PDF (587.5 KB)
• References

Open Access

Application possibilities of LBN for civil engineering issues 04008

Agata Siemaszko and Magdalena Apollo

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904008

• Abstract
• PDF (453.1 KB)
• References

Open Access

Transparent façades – selection of construction materials with the use of modified multi-criteria spider’s network analysis method 04009

Oliwier Zapała and Damian Wieczorek

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904009

• Abstract
• PDF (668.2 KB)
• References

Open Access

Critical evaluation of modern concrete applications 04010

Jarosław Malara and Justyna Szafraniec

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904010

• Abstract
• PDF (418.5 KB)
• References

Open Access

Multicriteria assessment of selected types of ceilings 04011

Julia Nowak and Edyta Plebankiewicz

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821904011

• Abstract
• PDF (381.7 KB)
• References

Open Access

Overview of vibroacoustic isolators used in railway tracks 05001

Cezary Kraśkiewicz, Wojciech Oleksiewicz, Monika Płudowska-Zagrajek and Cezary Lipko

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821905001

• Abstract
• PDF (907.8 KB)
• References

Open Access

The influence of selected static and dynamic parameters of resilient mats on vibration reduction of railway tracks 05002

Cezary Kraśkiewicz, Artur Zbiciak, Wojciech Oleksiewicz and Andrzej Piotrowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821905002

• Abstract
• PDF (742.8 KB)
• References

Open Access

Determination of p-y curves for offshore piles based on in-situ soil investigations 05003

Kamila Międlarz and Lech Bałachowski

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821905003

• Abstract
• PDF (362.8 KB)
• References

Open Access

An algorithm to generate high dense packing of particles with various shapes 05004

Konrad Miśkiewicz, Robert Banasiak, Maciej Niedostatkiewicz, Krzysztof Grudzień and Laurent Babout

Published online: 29 October 2018

DOI: https://doi.org/10.1051/matecconf/201821905004

• Abstract
• PDF (454.3 KB)
• References

Open Access

Erratum

An algorithm to generate high dense packing of particles with various shapes 05005

Konrad Miśkiewicz, Robert Banasiak, Maciej Niedostatkiewicz, Krzysztof Grudzień and Laurent Babout

Published online: 29 January 2019

DOI: https://doi.org/10.1051/matecconf/201821905005

• Abstract
• PDF (93.26 KB)