Issue |
MATEC Web Conf.
Volume 219, 2018
2nd Baltic Conference for Students and Young Researchers (BalCon 2018)
|
|
---|---|---|
Article Number | 03005 | |
Number of page(s) | 7 | |
Section | Concrete Structures | |
DOI | https://doi.org/10.1051/matecconf/201821903005 | |
Published online | 29 October 2018 |
The experimental comparison of parameters signals of acoustic emission during destructive test on composites based on cement
Brno University of Technology, Faculty of Civil Engineering,
Veveří 331/95,
Brno, Czech Republic
*
Corresponding author: hodulakova.m@fce.vutbr.cz
The paper reports the analysis of acoustic emission signals captured during compressive strength tests of fine-grained cement-based composites of various composition. Acoustic emission monitoring belongs to a non-invasive and passive non-destructive testing technique. It is one of the most sensitive experimental techniques to monitor cracking of materials. While the acoustic emission phenomenon is directly associated with nucleation of cracks in materials based on cement, the measurement of these kinds of materials is readily applied to detect cracking activity. An understanding of microstructure–performance relationships is the key to true understanding of material behaviour.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.