Free Access to the whole issue

MATEC Web of Conferences

Volume 82 (2016)

2016 International Conference on Design, Mechanical and Material Engineering (D2ME 2016)

Auckland, New Zealand, September 8-10, 2016
B.B. Sahari, Q. Qin and R. Das (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

About the conference

Published online: 31 October 2016

PDF (185 KB)

Open Access

Statement of Peer review

Published online: 31 October 2016

PDF (58.7 KB)

Chapter 1: Mechanical Engineering

Open Access

Correct use of Membrane Elements in Structural Analysis 01001

Timothy Rothman and Liming Ji

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201001

Open Access

Development of Hybrid Type Flexible Pneumatic Cylinder for Considering Less Air Consumption 01002

Hiroaki Tamaki, Shujiro Dohta, Tetsuya Akagi, Wataru Kobayashi and Yasuko Matsui

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201002

Open Access

Finding Pull Directions for Interference-free Mould Openings 01003

Alan C. Lin and Mohammad Effendi

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201003

Open Access

Drag Performance of Twist Morphing MAV Wing 01004

N.I. Ismail, A.H. Zulkifli, R.J. Talib, H. Zaini and H. Yusoff

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201004

Open Access

Improvement of Flexible Linear Stepping Actuator Driven by Pneumatic Balloons and Brakes 01005

Yuya Eguchi, Tetsuya Akagi, Shujiro Dohta and Wataru Kobayashi

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201005

Open Access

Miniaturization of a Quasi-Servo Valve and Its Application to Positon Control of a Rubber Artificial Muscle with Built-in Sensor 01006

Yoshinori Moriwake, Shujiro Dohta, Tetsuya Akagi and So Shimooka

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201006

Open Access

Vibration Analysis of Suspension Cable with Attached Masses by Non-linear Spline Function Method 01007

Jian Qin, Liang Qiao, Jun Chen, Jiancheng Wan and Yongjun Xia

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201007

Open Access

Catenary Analysis and Calculation Method of Track Rope of Cargo Cableway with Multiple Loads 01008

Jian Qin, Jun Chen, Liang Qiao, Jiancheng Wan and Yongjun Xia

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201008

Open Access

Kinetic Modelling and Model based Control of SCR Deposit 01009

Feng Qian and Lin Lv

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201009

Open Access

Topology Optimisation of Wireless Sensor Networks 01010

Aye Min Thike, Sergey Lupin, Roustiam Chakirov and Yuriy Vagapov

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201010

Open Access

A Hug Behavior Generation Model Based on Analyses of Human Behaviors for Hug Robot System 01011

Mitsuru Jindai, Shunsuke Ota and Tohru Sasaki

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201011

Open Access

Study on Circle Center Positioning Error by Fitting of Measurement System for Gear Chamfering 01012

chi Zhang, Zengpu Xu, Guohao Liu, Yongqiang Wang and Congling Zhou

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201012

Open Access

Stability and Bifurcation Analysis of Functionally Graded Materials Plate Under Different Loads and Boundary Conditions 01013

Shuping Chen, Wei Zhang and Yuxin Hao

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201013

Open Access

Effect of Equivalence Ratio on Composition and performance of Biogas and Gasoline Exhaust from Spark Ignition Engine by Mathematical Modeling 01014

Paramust Juntarakod

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201014

Open Access

Study on the Performance of a Proposed Fire Safe Elevator System used for Evacuation in Supertall Buildings 01015

Na Cai and Shifei Shen

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201015

Open Access

The Application of Quantum Energy Saver on Engine 01016

Xiong Fang, Wenwu Mao, Xisheng Shen and Zhixin Chen

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201016

Open Access

Local Search Optimization for a Multi-state Series-parallel System 01017

Ming-Ang Yin, Zhi-Li Sun, Jian Wang and Yu Guo

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201017

Open Access

The Improvement of Carburater Efficiency Using Biogas-based Venturi 01018

Ni Ketut Lasmi, Alamta Singarimbun and Last Wahyu Srigutomo

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201018

Open Access

Surface Roughness Prediction in Grinding: a Probabilistic Approach 01019

Krishna Kumar Saxena, Sanjay Agarwal and Raj Das

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168201019

Chapter 2: Materials Engineering

Open Access

Combined Ultrasonic Elliptical Vibration and Chemical Mechanical Polishing of Monocrystalline Silicon 02001

Defu Liu, Tao Chen and Riming Yan

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202001

Open Access

Degradation of Phenol in Wastewater with Ozone Produced by Self-design Ozone Generator 02002

Shibo Wang, Dongwei Zhong, Guangfei Qu, Ping Ning, Jiankang Quan and Xiaotian Chen

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202002

Open Access

Bamboo Fibre-reinforced Semi-Metallic Brake Friction Materials for Automotive Applications 02003

R. J. Talib, K. Ramlan, N.I. Ismail, M.F. Ismail and A. O. Eliasidi

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202003

Open Access

3D Fractal Investigation on Ultrasonic Vibration Assisted End Grinding Surface of SiCp/Al Composites 02004

Wei Zheng, Ming Zhou and Li Zhou

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202004

Open Access

Stable Grinding Micro-wall of Flexible Joints with Controllable Force 02005

Da Qu, Fei Ding and Bo Wang

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202005

Open Access

Improvement of Wearable Wrist Rehabilitation Device Using Flexible Pneumatic Cylinders 02006

Naoki Kato, Shujiro Dohta, Tetsuya Akagi, Wataru Kobayashi and Mohd Aliff

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202006

Open Access

Microstructure and Tribological Behaviour of CrCuFeNiTi High Entropy Alloys 02007

Kehinde Sobiyi, Michael Bodunrin, Esther Akinlabi and Babatunde Obadele

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202007

Open Access

Axial Crushing and Energy Absorption of Empty and Foam Filled Jute-glass/ Epoxy Bi-tubes 02008

Asad A. Khalid and Maziri Morsidi

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202008

Open Access

Reflow Process Parameters Analysis and Reliability Prediction Considering Multiple Characteristic Values 02009

Yu Guo, Zhili Sun, Minghe Liu and Mingang Yin

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202009

Open Access

Effect of Interface on the Deformation of Aluminium Bicrystal: Atomistic Simulation Study 02010

Shaohua Yan, Bobin Xing and Qing-Hua Qin

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202010

Open Access

Chaotic Characteristics and the Application of SVM in the Tool Wear State Recognition 02011

Shan Guan, Hongyang Pang and Zhenxing Kang

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202011

Open Access

Anti-oxidation and Infrared Characteristics of ZrSiO4 Coating 02012

Yang Wang, Zhaofeng Chen and ShengJie Yu

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168202012

Chapter 3: Design Engineering

Open Access

Parametric Design of Outdoor Broadcasting Studio Based on Schema Theory 03001

Li Zhu, Nan Zhang and Xiaoying Qing

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168203001

Open Access

The Research on Color Grading of Green Jade Images Based on HSL Chromaticity Analysis 03002

Lili Zhang and Xinqiang Yuan

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168203002

Open Access

Comprehensive Bridge Health Evaluation Method Based on Information Fusion 03003

Li-ping Li, Wen-xia Ding and Xiao-li Lu

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168203003

Open Access

Design and Simulation of 3-DOF Reconfigurable Planar Parallel Robot 03004

Zhili Hou, Wenge Wu, Ruiqin Li and Huibin Qin

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168203004

Open Access

Discussion on the Coordinated Development of Ecological Protection and Tourism Development from the Current Situation of Country Park in Shenzhen 03005

Hu yu and Huang Hui

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168203005

Open Access

Influence Factors of Sports Bra Evaluation and Design Based on Large Size 03006

Lingxi Zhang, Jianping Wang and Ruixuan Han

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168203006

Open Access

Healthy Modern Landscape Inherited from Hakka Culture 03007

Hui Huang, Ruofei Gao and Xiaoyong Kang

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168203007

Open Access

Design Study of 200MWth Gas Cooled Fast Reactor with Nitride (UN-PuN) Fuel Long Life without Refueling 03008

Ratna Dewi Syarifah, Yacobus Yulianto, Zaki Su’ud, Khairul Basar and Dwi Irwanto

Published online: 31 October 2016

DOI: https://doi.org/10.1051/matecconf/20168203008