MATEC Web Conf.
Volume 82, 20162016 International Conference on Design, Mechanical and Material Engineering (D2ME 2016)
|Number of page(s)||8|
|Section||Chapter 2: Materials Engineering|
|Published online||31 October 2016|
Degradation of Phenol in Wastewater with Ozone Produced by Self-design Ozone Generator
Kunming University of Science & Technology, Environmental Science and Engineering Department, 650500 Yunnan, China
a Corresponding author: email@example.com
The optimized tube’s structure of the self-design ozone generator was made with the double dielectric inner electrode and small metal cones were embedded in the outside electrode. This ozone generator was used for the degradation of phenol in wastewater. The research was studied from ozone gas flow rate, reaction time, the initial pH and concentration of the phenol in wastewater. In addition, the article also discusses the reaction mechanism of ozone degraded the phenol in wastewater. The results illustrate that the ozone concentration of self-design ozone generator under the pure oxygen flux (1.0 L/min) were 7.06 mg/L, compared with the unoptimized ozone, the optimized ozone generator’s efficiency was improved 56.89%; the phenol removal rate was increased as the initial pH increased in wastewater, when pH was 12, the phenol removal rate was 80.17%; GC-MS analysis was adopted to analyze and determine the phenol intermediates. The results illustrate that the major oxidation degradation products of phenol may be p-benzoquinone benzenequinone, 4-cyclopentene-1, 3-dione and diacetone alcohol.
© The Authors, published by EDP Sciences, 2016
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.