MATEC Web of Conferences

Open Access

Investigations of Roughness Evolution in Uniaxial and Biaxial Stretching of Interstitial Free - IF Steel Sheet 01001

José Divo Bressan and Ricardo Kirchoff Unfer

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801001

• Abstract
• PDF (797.9 KB)
• References

Open Access

Tensile testing of sheet metals at elevated temperatures with optical strain rate control 01002

David Naumann and Marion Merklein

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801002

• Abstract
• PDF (609.1 KB)
• References

Open Access

Simulation of hot stamping considering self-tempering 01003

Keitaro Mori, Masahiro Kubo and Kazuo Okamura

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801003

• Abstract
• PDF (847.6 KB)
• References

Open Access

Competing failure modes in hole expansion testing of AHSS sheets 01004

Leopold Wagner, Patrick Larour, Johann Freudenthaler, Gernot Trattnig and Erich Berger

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801004

• Abstract
• PDF (834.8 KB)
• References

Open Access

Method planning for deep drawing in the production of workpieces with variable shapes 01005

Richard Krimm, Sven Hübner, Dennis Schmiele, Lennart Hinz, Malte Nagel and Jan-Ulrich Gellermann

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801005

• Abstract
• PDF (842.3 KB)
• References

Open Access

The effect of strain rate sensitivity on the prediction of the formability of advanced high strength steels 01006

Marilena C. Butuc, Toni Chezan and Gabriela Vincze

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801006

• Abstract
• PDF (605.5 KB)
• References

Open Access

Study of Deep Drawing Combined with Ironing of A7075 Aluminum Alloy 01007

Yeong-Maw Hwang, Yen-Lin Wu and Cheng-Chi Wang

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801007

• Abstract
• PDF (722.3 KB)
• References

Open Access

Design criteria to use 3D printed polymeric tools in metal forming processes 01008

Muhammad Ali Kaleem, Peter Frohn-Sörensen, Rainer Steinheimer and Bernd Engel

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801008

• Abstract
• PDF (509.4 KB)
• References

Open Access

Experimental and Numerical Investigations of Effects of HFQ Conditions on Forming of AA6082 B-pillar components 01009

Jiaqi Li, Ruiqiang Zhang, Jianguo Lin and Zhusheng Shi

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801009

• Abstract
• PDF (1.223 MB)
• References

Open Access

A Novel Diagonal-Cruciform Test Specimen to Evaluate Sheet Formability 01010

Rui F. V. Sampaio, João P. M. Pragana, Ivo M. F. Bragança, Carlos M. A. Silva and Paulo A. F. Martins

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801010

• Abstract
• PDF (1006 KB)
• References

Open Access

Flattening of asperities during biaxial in-plane deformation – Full mapping of the strain space by numerical simulations 01011

Maximilian Zwicker, Paulo A. F. Martins and Chris Valentin Nielsen

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801011

• Abstract
• PDF (1.090 MB)
• References

Open Access

Observation of Microstructural Characteristics on the Formability for AA 7075 Alloy Sheets Under Warm Forming Conditions 01012

Wan-Ling Chen and Rong-Shean Lee

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801012

• Abstract
• PDF (769.5 KB)
• References

Open Access

Introduction and validation of a surrogate model for warm forming and cathodic dip treatment of EN AW-7075-T6 01013

Jan Jepkens, Eduard Ortlieb, Dominyka Vasquez Ramirez, Hendrik Wester, Johanna Uhe and Bernd-Arno Behrens

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801013

• Abstract
• PDF (676.3 KB)
• References

Open Access

Reinforcement of fibre-reinforced plastic components using metal inserts 01014

Bernd-Arno Behrens, Sven Hübner, Jan-Ulrich Gellermann, Lorenz Albracht and Joern Wehmeyer

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801014

• Abstract
• PDF (476.5 KB)
• References

Open Access

Data–driven Approach for Extracting Steady–state Data from Unsteady–state Flow Stress without Material Modeling 01015

Eiichi Ota, Minami Fujimura and Yasumoto Sato

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801015

• Abstract
• PDF (473.1 KB)
• References

Open Access

Investigation of hot stamping transition zones at tailored carburization at elevated temperatures 01016

Jan Henning Risse and Marion Merklein

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801016

• Abstract
• PDF (1.012 MB)
• References

Open Access

Ear height control by die radius shape in cylindrical deep drawing 01017

Tsuyoshi Muraoka, Yusuke Okude, Isao Nakamura and Takashi Katagiri

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801017

• Abstract
• PDF (728.1 KB)
• References

Open Access

Improving the local formability of a AA7075 aluminum alloy by laser-induced modification of the alloying concept 01018

Henrik Zieroth, Marcel Stephan, Michael Schmidt and Marion Merklein

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801018

• Abstract
• PDF (436.7 KB)
• References

Open Access

Influence of thickness variability on the deep drawing of a cylindrical cup 01019

Luís Menezes, Marta Oliveira, Diogo Neto, Carlos Monteiro and André Pereira

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801019

• Abstract
• PDF (607.2 KB)
• References

Open Access

Correcting the earing profile resulting from misalignments of the blank in the deep drawing of a cylindrical cup 01020

Marta C. Oliveira, Diogo M. Neto, Luís F. Menezes, Pedro M. Seixas and André F. Pereira

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801020

• Abstract
• PDF (444.5 KB)
• References

Open Access

Inline monitoring of material properties and product shape in roll forming 01021

Abdelrahman Essa, Marcus Decker, Harshil Padharia and Matthias Weiss

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801021

• Abstract
• PDF (955.2 KB)
• References

Open Access

Study on the failure behaviour of Advanced High Strength Steel considering stamping history 01022

Ji-chao Zhang, Changwei Lian and Fei Han

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801022

• Abstract
• PDF (803.7 KB)
• References

Open Access

Limitations of XGBoost in Predicting Material Parameters for Complex Constitutive Models 01023

Pedro Prates, Dário Mitreiro and António Andrade-Campos

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801023

• Abstract
• PDF (352.6 KB)
• References

Open Access

Evaluation of forming methods for a cup-part used in an ultra-miniatured radio-frequency connector 01024

Heng-Sheng Lin, Chuan-Hsi Hung, Zong-Ying Wang and Xing-Yonug Lo

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801024

• Abstract
• PDF (774.6 KB)
• References

Open Access

Increasing the performance of hot forming parts by resistance heating in XHV-adequate atmosphere 01025

Bernd-Arno Behrens, Sven Hübner, Ulrich Holländer, André Langohr, Alexander Schnettger, Jan UlrichGellermann, Jörn Wehmeyer and Lorenz Albracht

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801025

• Abstract
• PDF (552.9 KB)
• References

Open Access

The effect of banded microstructures on the hole expansion behavior of hot-rolled steel 01026

Xiaoyu Yang and Zhenli Mi

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801026

• Abstract
• PDF (1023 KB)
• References

Open Access

Determination of Kinematic Hardening Parameters in W-Temper Forming of 6082 Aluminum Alloy 01027

Jemal Ebrahim Dessie, László Rónai and Zsolt Lukács

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801027

• Abstract
• PDF (696.3 KB)
• References

Open Access

Effect of pre-strain on the strength of similar aluminium EN AW5754-H22 alloy joined by clinching 01028

Abdulhakim Shukurea Rahmato and Péter Zoltán Kovács

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801028

• Abstract
• PDF (848.3 KB)
• References

Open Access

Crystal plasticity finite element method application in micro/meso-scaled deep drawing and some related concerns 01029

Xu Tong and M. W. Fu

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801029

• Abstract
• PDF (2.522 MB)
• References

Open Access

Improving adjustable ironing punch performance using cemented carbide components 01030

Kaarel Siimut, Kasper Mygind Madsen, Ermanno Ceron and Chris Valentin Nielsen

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801030

• Abstract
• PDF (1.111 MB)
• References

Open Access

Inline Wear Detection in High-Speed Progressive Dies Using Photometric Stereo 01031

Jonas Moske, Hasan Kutlu, Adrian Steinmeier, Phil Groenewold, Pedro Santos, Arjan Kuijper, Andreas Weinmann and Peter Groche

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801031

• Abstract
• PDF (637.4 KB)
• References

Open Access

Pad Force Required in Shear-deformation Sheet Forming of Curved Hat Channels for Ultra-High-Strength Steels 01032

Saaya Kanayama, Tohru Yonebayashi, Yasuharu Tanaka and Shunji Hiwatashi

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801032

• Abstract
• PDF (1.635 MB)
• References

Open Access

Multi-scale modelling of plastic anisotropy of aluminium sheets and application to deep-drawing 01033

Oana Cazacu and Benoit Revil-Baudard

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801033

• Abstract
• PDF (544.1 KB)
• References

Open Access

The Relationship Between Fracture Toughness and Blanking Performance of 850MPa Hot-Rolled Steels 01034

Vili Kesti, Laura Grifé, Pekka Plosila, David Frómeta and Antti Kaijalainen

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801034

• Abstract
• PDF (675.2 KB)
• References

Open Access

Impact of non-rotationally symmetric joint orientation on neighbouring joints and component performance in lap shear specimens 01035

Deekshith Reddy Devulapally, Christian Steinfelder, Thomas Tröster and Alexander Brosius

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801035

• Abstract
• PDF (794.2 KB)
• References

Open Access

Investigation of frictional behaviour in incremental sheet forming of grade one titanium sheet 01036

Lars Korner and Hengan Ou

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801036

• Abstract
• PDF (756.8 KB)
• References

Open Access

Investigation using single point incremental forming (SPIF) to fabricate patient-specific, titanium orbital floor implants 01038

Elizabeth M. Mamros, Lauren E. Blaha and Christian A. Kauffman

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801038

• Abstract
• PDF (799.6 KB)
• References

Open Access

Surface quality improvement under low-frequency and high-amplitude vibration in rotational vibration-assisted incremental sheet forming 01039

Oliver Lewthwaite, Jamie Booth and Hui Long

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801039

• Abstract
• PDF (912.0 KB)
• References

Open Access

Investigation of Wrinkling Initiation in Shear Spinning 01040

Zhikun Li and Hui Long

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801040

• Abstract
• PDF (1.093 MB)
• References

Open Access

Advances in Neural Network assisted Tool Pressure Prediction 01041

Florian Göltl, Felix Harst, Arndt Birkert and Nicolaj C. Stache

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801041

• Abstract
• PDF (618.5 KB)
• References

Open Access

New Sequential Forming Process Involving Single-forming Machine for Hat Cross-sectional Panels with Various In-plane Curvatures 01043

Haruki Sato, Eiichi Ota, Minami Fujimura, Yasumoto Sato, Masatoshi Sawamura, Atsushi Mikuni, Shigeru Inamori and Noriyuki Ueno

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801043

• Abstract
• PDF (1.007 MB)
• References

Open Access

Energy Performance of Non-Conventional Metal Tubular Systems via a New Multiaxial 01044

Rachid Baleh and Hayat Belguebli

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801044

• Abstract
• PDF (1.183 MB)
• References

Open Access

Parametric evaluation and predictive modelling of formability in μ-SPIF process 01045

Vijay Kumar Sahu, Purnendu Das, Avishek Adhikary and Kaushik Bandyopadhyay

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801045

• Abstract
• PDF (844.8 KB)
• References

Open Access

Experimental evaluation of a feature based bipolar plate forming approach in a hybrid tool 01046

Dennis Albers, Karl Ngondji, Florian Hüsing and Christian Brecher

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801046

• Abstract
• PDF (536.0 KB)
• References

Open Access

Heat treatment conditions for forming AA6022 aluminum sheet in a forming process with intermediate heat treatment 01047

Shuki Nakamura, Ryutaro Akiyoshi and Masatoshi Yoshida

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801047

• Abstract
• PDF (490.6 KB)
• References

Open Access

Study on the Formation Mechanism of Fish-Scale Defects during Flow Forming of Copper Alloy Tubes with Large Thickness-to-Diameter Ratio 01048

Qinxiang Xia, Jie Zhao, Gangfeng Xiao, Delin Tang and Huachun Cui

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801048

• Abstract
• PDF (882.9 KB)
• References

Open Access

Mini-punch experimental device development and analysis for ductile damage identification of naval structures 01049

Kevin Buducan, Christophe Pradille, Serge Bonhomme, Dorian Brousse, Bruno Leblé and Pierre-Olivier Bouchard

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801049

• Abstract
• PDF (1.580 MB)
• References

Open Access

Development of a soft sensor for determining the cooling rate for press hardening of medium manganese steel 01050

Karl J. Tilly, Emad Scharifi and David Bailly

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801050

• Abstract
• PDF (368.5 KB)
• References

Open Access

Influence of Tool Geometry and Tool Material on the Formability and Formed Part Accuracy in Single Point Incremental Forming 01051

Suryakant Nagar, Kailash Sahu, Ritesh Banjare, Yogesh Kumar Dewangan and Kaushik Bandyopadhyay

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801051

• Abstract
• PDF (850.6 KB)
• References

Open Access

Cavity Design for Surface Textured Sheets in Metal Forming 01053

Philipp Schumann, Daniel Martin, Otavio Moro Serra and Peter Groche

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801053

• Abstract
• PDF (467.5 KB)
• References

Open Access

Tube fit joining: A novel technique for busbar-to-prismatic cell interconnections in electric vehicles 01054

Mohammad Mehdi Kasaei, Vasco B. Gomes, Ricardo J. C. Carbas, Eduardo A. S. Marques and Lucas F. M. da Silva

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801054

• Abstract
• PDF (827.3 KB)
• References

Open Access

Effect of prestrain and strain path on Retained Austenite transformation and eventual fracture behavior of Q&P steels 01055

Sriram Sadagopan, Brian Lin, Narayan Pottore, Su Liu and Hong Zhu

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801055

• Abstract
• PDF (717.7 KB)
• References

Open Access

Influence of Bake Hardening on Plastic Strain Dependency of Elastic Modulus 01056

Shota Kusaka, Takashi Iwama, Kentaro Sato, Yoichiro Ohnishi, Tsuyoshi Shiozaki and Fusahito Yoshida

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801056

• Abstract
• PDF (1.360 MB)
• References

Open Access

Contributions to increasing the accuracy and reducing the forming forces of robot-based two-point incremental forming 01057

Peter Scholz, Dieter Weise, Alexander Pierer, Christian Naumann, Martin Dix, Marina Terlau, Axel von Freyberg and Andreas Fischer

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801057

• Abstract
• PDF (726.6 KB)
• References

Open Access

Characterisation and modelling of the flow behaviour of a medium manganese steel for hot forming 01058

Philipp Althaus, Radhakanta Rana, Hendrik Wester, Johanna Uhe and Bernd-Arno Behrens

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801058

• Abstract
• PDF (598.5 KB)
• References

Open Access

Strain Path Influence on Formability and Microstructural Evolution of IFHS Steel via Miniature LDH Test 01059

Pavan Kumar, Peeyush Mahajan, Sushil K. Mishra, Rahul Datta and K. Narasimhan

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801059

• Abstract
• PDF (1.346 MB)
• References

Open Access

Integration of bending operation in hybrid additive manufacturing chains based on powder bed fusion 01060

Valentino Cristino, Rui Sampaio, João Pragana, Ivo Bragança, Carlos Silva and Paulo Martins

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801060

• Abstract
• PDF (780.7 KB)
• References

Open Access

Multiscale simulation of surface roughening of a deep drawing steel due to subsurface plastic deformation 01062

Aiden Carley-Clopton, Grethe Winther, Oleg V. Mishin and Chris Valentin Nielsen

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801062

• Abstract
• PDF (998.0 KB)
• References

Open Access

Investigations on strain rate dependent forming limits of 5xxx aluminium alloys for flow-line-free sheet metal forming 01063

Silke Klitschke, Lukas Hauser and Mathias Liewald

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801063

• Abstract
• PDF (1.087 MB)
• References

Open Access

Comparison of nonlinear strain path correction models for the FLD characterization 01064

Grégoire Mainguy, Tudor Balan and Xavier Lemoine

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801064

• Abstract
• PDF (753.8 KB)
• References

Open Access

Integrating Optical Draw-In Measurements with Finite Element Analysis for Enhanced Process Insights in Sheet Metal Forming 01065

Toni Chezan, Trunal Dhawale, Johan Pilthammar, Alexander Barlo and Omsri Aeddula

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801065

• Abstract
• PDF (643.2 KB)
• References

Open Access

Sheared edge formability of multi-phase steels under in- and out-of-plane deformation 01066

Advaith Narayanan, Rhys Northcote, Patrick Cleary, Miguel Quinones and Cliff Butcher

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801066

• Abstract
• PDF (786.4 KB)
• References

Open Access

Circular and square cups drawing and ironing of Ti alloy sheets by incremental press forming method 01067

Yusuke Okude, Taku Iwaoka, Isao Nakamura, Tsuyoshi Muraoka and Takashi Katagiri

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801067

• Abstract
• PDF (941.2 KB)
• References

Open Access

Springback compensation of symmetrical and quasi-symmetrical sheet metal car body parts 01068

Arndt Birkert, Nico Kellenbenz, Philipp Zimmermann and Felix Lepple

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801068

• Abstract
• PDF (653.0 KB)
• References

Open Access

Integration of multiple-linear and tumbling kinematics into self-piercing riveting 01069

Pia Holtkamp, Simon Wituschek, Michael Lechner and Gerson Meschut

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801069

• Abstract
• PDF (517.8 KB)
• References

Open Access

Characterization and modelling of multi-step drawing process for thick steel sheets 01070

Joséphine Chatellier, Christophe Pradille, Christophe Kerisit and Pierre-Olivier Bouchard

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801070

• Abstract
• PDF (649.6 KB)
• References

Open Access

Application of Recurrent Neural Networks in Uncertainty Analysis of Sheet Metal Forming 01071

Daniel Cruz, Tomás Parreira, Armando Marques, Pedro Prates, Marta Oliveira, Diogo Neto, Abel Santos, Rui Amaral, Manuel Barbosa and André Pereira

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801071

• Abstract
• PDF (2.954 MB)
• References

Open Access

Methodology for additive repair of press hardening dies using generic die segments and targeted deposition strategy 01072

Artem Alimov, Rico Haase, Gökhan Ertugrul, Alexander Sviridov, Verena Kräusel, Claudio K. Krug and Sebastian Härtel

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801072

• Abstract
• PDF (1.150 MB)
• References

Open Access

An investigation on behaviour of 800 MPa grade hot-rolled steels in interrupted ISO 16630 hole expansion testing 01073

Pekka Plosila, Raimo Vierelä, Päivi Juntunen, Vili Kesti, Jukka Kömi and Antti Kaijalainen

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801073

• Abstract
• PDF (1.460 MB)
• References

Open Access

Tools from Trash: Recycling pathways and use cases for rapid tooling 01074

Peter Frohn-Sörensen, Michael Schiller, Tamara Reinicke and Bernd Engel

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801074

• Abstract
• PDF (411.0 KB)
• References

Open Access

Material Parameter Identification Based on Heterogeneous Testing: Validation in case of a forming process 01075

Lisa Germain, Mafalda Gonçalves, Antonio Andrade-Campos and Sandrine Thuillier

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801075

• Abstract
• PDF (1.524 MB)
• References

Open Access

Enhanced ductility and fracture classification maps for advanced high-strength steels considering local ductility and fracture toughness 01076

David Frómeta, Laura Grifé and Daniel Casellas

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801076

• Abstract
• PDF (747.8 KB)
• References

Open Access

Analysis of Springback in Rotary Draw Bending Process: Numerical Modelling with Experimental Validation 01077

Rui L. Amaral, Daniel J. Cruz, Maria Almeida, Manuel Barros, Abel D. Santos and Ana Reis

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801077

• Abstract
• PDF (1.054 MB)
• References

Open Access

Yoshida-Uemori model: Improvement of the elastic modulus evolutive model and Springback application 01078

Xavier Lemoine

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801078

• Abstract
• PDF (679.3 KB)
• References

Open Access

Robot-assisted Single Point Incremental Forming: Focus on shape accuracy of the final part 01079

Michele Cannillo, Angela Cusanno, Àngel Brisa i Álvarez, Martina Campanella, Antonio Piccininni, Ines Ferrer Real, Maria Luisa Garcia-Romeu and Gianfranco Palumbo

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801079

• Abstract
• PDF (847.9 KB)
• References

Open Access

Investigation failure behavior in the shear tensile test with variety of specimen stiffness 01080

Eugen Wolf and Alexander Brosius

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801080

• Abstract
• PDF (927.2 KB)
• References

Open Access

Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys 01081

Moritz Neuser, Malte Christian Schlichter, Kay-Peter Hoyer, Mathias Bobbert, Gerson Meschut and Mirko Schaper

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801081

• Abstract
• PDF (765.1 KB)
• References

Open Access

Analysis of experimental scattering sources in local ductility measurement from flat tensile test sample fracture surfaces 01082

Patrick Larour, Wolfgang Lumetzberger and Leopold Wagner

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801082

• Abstract
• PDF (1.194 MB)
• References

Open Access

Research on the residual stress distribution of aircraft engine blades repaired by laser shock peening and laser cladding composite process 01083

Xiuquan Cheng, Junhao Zhang, Ruhao He, Gangfeng Xiao and Qinxiang Xia

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801083

• Abstract
• PDF (1.083 MB)
• References

Open Access

High-speed blanking and its potential for producing ultra-high-strength automotive safety components 01084

Olaf Schrage, Roald Lingbeek, Priidu Peetsalu, Marlon Hahn, Hamed Dardaei Joghan, Yannis P. Korkolis and A. Erman Tekkaya

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801084

• Abstract
• PDF (972.7 KB)
• References

Open Access

Design of multi-step dies for sheet metal forming using a workpiece-performance-based approach: A preliminary study 01085

Gabriel Marín, Florian Weber, Hosen Sulaiman, Martin Heuse and Yannis P. Korkolis

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801085

• Abstract
• PDF (1.575 MB)
• References

Open Access

Investigation of the impact of a rotationally superimposed punch stroke on the binding mechanisms of a clinched joint 01086

Stephan Lüder, Eugen Wolf, Hans Christian Schmale and Alexander Brosius

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801086

• Abstract
• PDF (3.636 MB)
• References

Open Access

An evolutionary algorithm-based numerical material testing system based on a crystal plasticity finite element model 01087

Koki Komatsu and Tetsuo Oya

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801087

• Abstract
• PDF (685.9 KB)
• References

Open Access

Investigation of a test rig based on smart vision sensors for automated inspection of press-hardened automotive body components 01088

Fabio Simon, Thomas Werner, Andreas Weidemann, Christina Guilleaume and Alexander Brosius

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801088

• Abstract
• PDF (735.1 KB)
• References

Open Access

An Approach to Modelling Friction-Stir Welded Joints in Forming 01089

Werner Feix, Celalettin Karadogan, Tobias Graf and André Haufe

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801089

• Abstract
• PDF (952.0 KB)
• References

Open Access

A Comprehensive Benchmark Dataset for Sheet Metal Forming: Advancing Machine Learning and Surrogate Modelling in Pro-cess Simulations 01090

Pascal Heinzelmann, Sebastian Baum, Kim Rouven Riedmüller, Mathias Liewald and Michael Weyrich

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801090

• Abstract
• PDF (1.285 MB)
• References

Open Access

Investigation into Noise Emission Reduction of a Cutting Press via Active Vibration Control 01091

Dietmar Friesen, Dennis Schmiele, Richard Krimm and Bernd-Arno Behrens

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801091

• Abstract
• PDF (1.081 MB)
• References

Open Access

Novel Approaches for In-line Draw-in Measurement Using Cost Effective Tactile Sensors 01092

Lander Galdos, Laura Muñiz, Javier Trinidad, Andoitz Aranburu, Julian Ramirez de Okariz and Aratz Barandiaran

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801092

• Abstract
• PDF (760.4 KB)
• References

Open Access

On the equivalence and differences of three plane-stress yield criteria for modelling orthotropic sheet metals with the tension-compression strength differential effect 01093

Jie Sheng and Wei Tong

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801093

• Abstract
• PDF (444.5 KB)
• References

Open Access

Increasing the displaced fluid volume of curved metal membranes for diaphragm compressors 01094

Mikhail Solovev, André Leonhardt, Andreas Kunke and Till Clausmeyer

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801094

• Abstract
• PDF (1.015 MB)
• References

Open Access

On the hybridization of double-flush riveting with adhesive bonding 01095

João M. B. Alpendre, Pedro M. S. Rosado, Rui F. V. Sampaio, João P. M. Pragana, Ivo M. F. Bragança, Carlos M. A. Silva and Paulo A. F. Martins

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540801095

• Abstract
• PDF (1.514 MB)
• References

Open Access

Derivation of Point Plot-based Ductile Fracture Loci through Assimilation of Finite Element Simulation and Individual Actual Punched Surface Profile 02001

Takashi Matsuno, Jin Eguchi, Yasuhiro Kunii, Kazuyuki Shimizu, Yuichi Matsuki, Toyohisa Shinmiya and Eiji Iizuka

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802001

• Abstract
• PDF (635.2 KB)
• References

Open Access

Integrating Stamping Tool Temperature Effects into Early-Stage Process Design: Insights from an Industrial Benchmark 02002

Lide Insausti, Alexander Barlo, Mats Sigvant, Johan Pilthammar, Eneko Saenz de Argandoña and Joseba Mendiguren

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802002

• Abstract
• PDF (290.1 KB)
• References

Open Access

Quantifying the amount of restraining due to friction in the different areas of drawing tools: A numerical analysis 02003

Eneko Saenz-de-Argandona, Alaitz Zabala, Ainhoa Guinea, Daniel Cañizares and Joseba Mendiguren

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802003

• Abstract
• PDF (278.2 KB)
• References

Open Access

Effect of σ_b and r_b identification method from bulge tests on aluminium stamping simulation 02004

Dominique Saletti, Dominique Daniel, Thierry Bayle and Laurent Laszczyk

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802004

• Abstract
• PDF (247.0 KB)
• References

Open Access

Biaxial experiments and numerical analysis on damage and fracture in anisotropic aluminium sheets 02005

Michael Brünig, Sanjeev Koirala and Steffen Gerke

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802005

• Abstract
• PDF (317.3 KB)
• References

Open Access

Numerical analysis of crack evolution in PVD-deposited TiN-coated steel sheets under loading conditions 02006

Konrad Perzynski and Lukasz Madej

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802006

• Abstract
• PDF (330.3 KB)
• References

Open Access

Process limits improvement in sheet injection using locally heat-treated aluminium alloy 02007

João P. Magrinho, Angela Cusanno, Miguel L. Jesus, Antonio Piccininni, Pasquale Guglielmi, Gianfranco Palumbo and M. Beatriz Silva

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802007

• Abstract
• PDF (333.5 KB)
• References

Open Access

The effects of cyclic-strengthening interrupted aging on the microstructure evolution and stress corrosion resistance of aluminum alloy 02009

Yuqiang Chen, Guanglin Ran, Dingding Lu, Yufeng Song and Qian Zhi

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802009

• Abstract
• PDF (412.0 KB)
• References

Open Access

Impact of Aluminium Ageing in an Industrial Stamping Process 02010

Margarida Teixeira, João Magrinho, Paulo Sousa, Nuno Ferreira, Vitor Pereira, António Borges, Filipe Diogo, Carlos Saraiva and M. Beatriz Silva

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802010

• Abstract
• PDF (358.6 KB)
• References

Open Access

Development of a machine learning algorithm for geometric compensation of Single Point Incremental Forming (SPIF) process 02011

Margarida F. Gralha, João P. G. Magrinho, João M. C. Sousa and M. Beatriz Silva

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802011

• Abstract
• PDF (359.0 KB)
• References

Open Access

On the preliminary evaluation of formability of Ti6Al4V selective laser melted sheets 02012

J. Andrés López-Fernández, Ana Rosa-Sainz, Inés Ferrer, Gabriel Centeno, M. Luisa García-Romeu and Carpóforo Vallellano

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802012

• Abstract
• PDF (307.7 KB)
• References

Open Access

Enhancing Contact Pressure Uniformity in Strip Drawing Tests: A Geometric Approach to Mitigate Edge Stress Risers 02013

Iñigo Llavori, Eneko Saenz de Argandoña, Alaitz Zabala, Alex McClosky, Maitane Uribe and Nagore Otegi

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802013

• Abstract
• PDF (512.5 KB)
• References

Open Access

Formability limits, damage and fracture mechanisms in AA5182 Al-Mg sheets formed under subzero temperature conditions 02014

John Magliaro, Amir M. K. Behtash and Ahmet T. Alpas

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802014

• Abstract
• PDF (316.2 KB)
• References

Open Access

Punch in a Punch: Validating FLC and fracture models for severe strain path changes 02015

Vincent Grolleau, Engin Sen, Erik de Best, Christian C. Roth and Dirk Mohr

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802015

• Abstract
• PDF (357.3 KB)
• References

Open Access

On the Determination of the Forming Limits of Low-Alloy Steel Thin-Walled Tubes 02016

João Magrinho, Pedro Cruz, Eneko Sáenz-De-Argandoña, Joseba Mendiguren and M. Beatriz Silva

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802016

• Abstract
• PDF (357.5 KB)
• References

Open Access

An Engineering Approximation on the Transformation of Plastic Work into Heat at Various Strain Rates and Stress States 02017

Xueyang Li, Christian C. Roth, Vincent Grolleau and Dirk Mohr

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802017

• Abstract
• PDF (393.1 KB)
• References

Open Access

Using the particle finite element method for predicting edge-cracking in complex phase high-strength steel sheets 02018

Olle Sandin, Patrick Larour, Juan Manuel Rodríguez, Jörgen Kajberg and Daniel Casellas

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802018

• Abstract
• PDF (446.7 KB)
• References

Open Access

Simultaneously improving strength, ductility and formability in 2195 Al-Li alloy components via pre-aging treatment 02019

Kuokuo Sun, Mei Zhan and Xiaoguang Fan

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802019

• Abstract
• PDF (814.9 KB)
• References

Open Access

On the thermomechanical behaviour of polymeric sheets at localized necking 02020

David Palomo, Andrés J. Martínez-Donaire, Domingo Morales and Carpóforo Vallellano

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802020

• Abstract
• PDF (328.6 KB)
• References

Open Access

Damage-induced changes in elastic stiffness of DP800 sheets at large strains 02021

Jan Gerlach, Robin Gitschel, Marlon Hahn, Yannis P. Korkolis and A. Erman Tekkaya

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802021

• Abstract
• PDF (664.7 KB)
• References

Open Access

Modelling wire-arc-additive manufacturing for joining by forming applications 02022

João M. A. Viegas, Pedro M. S. Rosado, Rui F. V. Sampaio, João P. M. Pragana, Ivo M. F. Bragança, Carlos M. A. Silva and Paulo A. F. Martins

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802022

• Abstract
• PDF (399.8 KB)
• References

Open Access

Formability limits by fracture in square tubes and L-section profiles 02023

Inês Almeida, João P. Magrinho and M. Beatriz Silva

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802023

• Abstract
• PDF (306.7 KB)
• References

Open Access

The Mechanism of Microstructural Transformation upon Edge Heat Treatment on Stretch Flangeability and Fracture of Ultrahigh-Strength Steel with Sheared Edge 02024

Yuichi Matsuki and Toyohisa Shinmiya

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802024

• Abstract
• PDF (490.9 KB)
• References

Open Access

Toward a Circular Economy in Deep Drawing: Remanufacturing End-of-Life Automotive Parts 02026

Johannes A. Österreicher, Florian Grabner, Paul Oberhauser, Sindre L. Hovden and Carina M. Schlögl

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802026

• Abstract
• PDF (384.4 KB)
• References

Open Access

Enhanced Formability of α-β Titanium Sheet Below 500°C 02027

Georg Kunschert, Jürgen A. Nietsch, Angelika Cerny, Florian Grabner and Johannes A. Österreicher

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802027

• Abstract
• PDF (429.1 KB)
• References

Open Access

Tension-Compression Asymmetry in AA2219: Effect of Temperature and Stress States 02028

Priya Tiwari, A. H. Siddiqui, Amit Singh, S. V. S Narayan Murty and Sushil Mishra

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802028

• Abstract
• PDF (355.1 KB)
• References

Open Access

Influence of process parameters on the quality of flexible forming of 316L bipolar plate 02030

Wenlong Xie, Zonghui Su, Siying Deng, Yong Xu, Hongwu Song and Shihong Zhang

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802030

• Abstract
• PDF (701.0 KB)
• References

Open Access

Manufacturing Process of 46XX High-Capacity, High-Density Cylindrical-Type -Battery Cell Can 02031

Jong-Hwa Hong, Ye-Chan Seo, Sumin Ji, Sedong Lee, Hongseok Seong and Eun-Yoo Yoon

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802031

• Abstract
• PDF (332.1 KB)
• References

Open Access

Modification of hole expansion ratios in Dual Phase Steels by Hole Edge Thermal Treatments 02032

Aman Mohtta, Murugaiyan Amirthalingam and Uday Chakkingal

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802032

• Abstract
• PDF (491.7 KB)
• References

Open Access

Application of Cold Stamping Process with 1500 MPa Ultra-High-Strength Steel for Aftermarket Bumper 02033

Yi-Chun Chen, Wan-Ling Chen, Chun-Kai Lin, Yi-Kai Lin and Yu-Lien Li

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802033

• Abstract
• PDF (548.1 KB)
• References

Open Access

Integrated Simulation Process Chain: From 3D Roll Forming Design to Crash Analysis 02035

Albert Sedlmaier, Thomas Dietl, André Abee, Johann Harrasser and Miguel Sousa Pereira

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802035

• Abstract
• PDF (479.5 KB)
• References

Open Access

Effect of recycling on the mechanical properties and formability of sheet metal 02036

Anna Payá, David Frómeta, Jaume Pujante and Manel da Silva

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802036

• Abstract
• PDF (380.6 KB)
• References

Open Access

The effect of retained austenite stability on the formability of third generation advanced high strength steel 02037

Gihak Yim, Heegwon Shin, Hyejin Kim, Seungpill Jung, Jinhwa Jeon and Dongyul Lee

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802037

• Abstract
• PDF (480.1 KB)
• References

Open Access

Automatic Identification of Critical Damage Value with In-situ Shearing Test and Notched Plate Tensile Test with Image Analysis 02038

Yoshinori Yoshida and Asuka Kutsukake

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802038

• Abstract
• PDF (408.7 KB)
• References

Open Access

An Application of Crystal Plasticity to predict Forming Limit Curve of Dual-Phase Steels with Validation 02039

Kiranmayi Abburi Venkata, Rohith Uppaluri, Johan Pilthammar and Renaud Gutkin

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802039

• Abstract
• PDF (265.9 KB)
• References

Open Access

Investigation on the formability and deformation mechanism of Zircaloy-4 sheets with different initial textures during stamping 02041

Siying Deng, Wenlong Xie, Shuaifeng Chen, Hongwu Song and Shihong Zhang

Published online: 07 May 2025

DOI: https://doi.org/10.1051/matecconf/202540802041

• Abstract
• PDF (331.8 KB)
• References