Open Access
Issue |
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
|
|
---|---|---|
Article Number | 01007 | |
Number of page(s) | 6 | |
Section | Full Papers | |
DOI | https://doi.org/10.1051/matecconf/202540801007 | |
Published online | 07 May 2025 |
- P. K. Gurmaita, R. Pongen, S. K. Gurmaita, Int. J. Cast Metals Research, 37, 208 (2024) [CrossRef] [Google Scholar]
- C. G. Kang, S. K. Kim, S. Y. Lee, Semi-Solid Proc. Alloys Composite, 116-117, 746 (2006) [Google Scholar]
- G. E. Totten, K. Funatani, L. Xie, Handbook of metallurgical process design. Marcel Dekker, Inc., New York, U.S.A. (2005) [Google Scholar]
- S. Raju, G. Ganesan, R. Karthikeyan, Trans. Nonferrous Metals Soc. China, 20, 1856, (2010) [CrossRef] [Google Scholar]
- H. Sato, K. Manabe, K. Ito, D. Wei, Z. Jiang, J. Mater. Proc. Technol., 224 233 (2015) [CrossRef] [Google Scholar]
- K. Bouchaâla, M. F. Ghanameh, M. Faqir, M. Mada, E. Essadiqi, Heliyon, 7, e06662 (2021) [CrossRef] [Google Scholar]
- R. Venkat Reddy, T. Janardhan Reddy, and G. C. M. Reddy, Int. J. Eng. Trends Technol., 3 53 (2012) [Google Scholar]
- H. Zein, M. El-Sherbiny, M. Abd-Rabou, M. El Shazly, American J. Mech. Eng., 1 20 (2013) [CrossRef] [Google Scholar]
- G. D. Lin, Die design and finite element analysis in wheel frame forging process of aluminum alloy AL 6061, Master’s thesis, Department of Mechanical and Electro-mechanical Engineering, National Sun Yat-sen University, (2023) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.