Open Access
| Issue |
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 6 | |
| Section | Full Papers | |
| DOI | https://doi.org/10.1051/matecconf/202540801006 | |
| Published online | 07 May 2025 | |
- M. Gensamer M., Trans ASM 36:30 ,(1946). [Google Scholar]
- Z. Marciniak and K. Kuczynski, K., Int. J. Mech. Sci. 9, 609 ,(1967). [CrossRef] [Google Scholar]
- R. Neugebauer, K-D. Bouzakis, B. Denkena, F. Klocke, A. Sterzing, E.A. Tekkaya, R. Wertheim, CIRP Ann, 60:627 ,(2011) [CrossRef] [Google Scholar]
- E. Vallaster, S. Wiesenmayer, M. Merklein, Prod. Eng. 18 (1):47, (2024) [CrossRef] [Google Scholar]
- P. Larour, A. Bäumer, K. Dahmen, W. Bleck, Steel Res. Int. 84:426 ,(2013) [CrossRef] [Google Scholar]
- L. Xu, F. Barlat, D.C. Ahn, J.D. Bressan, Sci Eng A 528 (7-8):3113 (2011). [CrossRef] [Google Scholar]
- J. D. Bressan, J. A. Williams, Int J Mech Sci 5:155 (1983). [CrossRef] [Google Scholar]
- J. E. Gutierrez, J. Noder and C. Butcher, Metals 10, 902 ,(2020) [CrossRef] [Google Scholar]
- P. Hora, L. Tong, B. Berisha, Int J Mater Form 6, 267 ,(2013). [CrossRef] [Google Scholar]
- M. C. Butuc, G. Vincze, R. Santos, A. Pereira, A. D. Santos, R. L. Amaral, F. Barlat, Int. J. of Mech. Sci. 281, 109559 ,(2024). [CrossRef] [Google Scholar]
- M. C. Butuc, C. Teodosiu, A. Barata da Rocha, J.J. Gracio, Eur. J. Mech. A Solids 30, 532 ,(2011). [CrossRef] [Google Scholar]
- F. Barlat, J. C. Brem, J. W. Yoon, K. Chung, R.E. Dick, D.J. Lege, F. Pourboghrat, S.-H. Choi, E. Chu, Int J Plast 19, 1297 ,(2003). [CrossRef] [Google Scholar]
- J. Noder, J. E. Gutierrez, A. Zhumagulov, J. Dykeman, H. Ezzat and C. Butcher, Materials 14, 4970 ,(2021). [CrossRef] [Google Scholar]
- J.-W. Lee, M.-G. Lee, F. Barlat, Int. J. Plast 29, 13 (2012). [CrossRef] [Google Scholar]
- Z. G. Ma, Z. Liu, X. Jiang, K. Wu, M. Diao, M. Wan, Mat. and Design 96, 401 ,(2016) [CrossRef] [Google Scholar]
- J. Samei, D. E. Green, J. Cheng, M. S. C. Lima, Mat. and Design 92:1028 ,(2016) [CrossRef] [Google Scholar]
- S. Basak, S. K. Panda, J. Mater. Process. Technol. 267, 289 ,(2019) [CrossRef] [Google Scholar]
- K.-H. Chung, W. Lee, J. H. Kim, C. Kim, S.H. Park, D. Kwon, K. Chung, Int. J. Solids Struct. 46, 344 ,(2009). [CrossRef] [Google Scholar]
- H. Park, S.-J. Kim, J. Lee, D. Kim, Determination of forming limits of high strength sound-deadening laminated sheet, IOP Conf. Series: J. phys: Conf. Series 1063, 012015 ,(2018). [CrossRef] [Google Scholar]
- Y. Lou, S. Kim, C. Lee, H. Huh, Prediction of forming limit diagrams of DP590 steel based on the M-K model with experimental verification, in Proceedings of the 10th Asia-Pacific Conference, AEPA, 100104, 61, 15-17 November 2010, Wuhan, China (2010). [Google Scholar]
- C. Butcher, F. Khameneh, A. Abedini, D. Connolly, S. Kurukuri, J. Mater. Process. Technol. 287: 116887 (2021). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.