EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 408 (2025) MATEC Web Conf., 408 (2025) 01064 References
Open Access
Issue
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
Article Number 01064
Number of page(s) 6
Section Full Papers
DOI https://doi.org/10.1051/matecconf/202540801064
Published online 07 May 2025
  1. M. Gensamer, Trans. Am. Math. Soc. 36, 30 (1946) [Google Scholar]
  2. S.P. Keeler, Plastic Instability and fracture in sheets stretched over rigid punches, Doctoral dissertation, Massachusetts Institute of Technology (1961) [Google Scholar]
  3. S.P. Keeler, SAE Tech. Pap. 650535 (1965) [Google Scholar]
  4. G.M. Goodwin, SAE trans, 380 (1968) [Google Scholar]
  5. K. Nakazima, T. Kikuma, K. Hasuka, Yamata Tech. Rep. 264, 8517 (1968) [Google Scholar]
  6. W. Müschenborn, H.M. Sonne, Arch. Eisenhüttenw. 46, 97 (1975) [Google Scholar]
  7. H.J. Kleemola, M.T. Pelkkikangas, Sheet Met. Ind. 63, 591 (1977) [Google Scholar]
  8. Y. Bergström, S. Ölund, Mater. Sci. Eng. C. 56, 47 (1982) [CrossRef] [Google Scholar]
  9. A. Graf, W.F. Hosford, Metall. Trans. 24, 2497 (1993) [CrossRef] [Google Scholar]
  10. A. Graf, W.F. Hosford, Int. J. Mech. Sci. 36, 897 (1994) [CrossRef] [Google Scholar]
  11. J.V. Laukonis, A.K. Ghosh, Metall. Trans. 9, 1849 (1978) [CrossRef] [Google Scholar]
  12. A.K. Ghosh, W.A. Backofen, Metall. Trans. 4, 1113 (1973) [CrossRef] [Google Scholar]
  13. T. Kobayashi, Effect of strain ratios on the deforming limit of steel sheet and its application to the actual press forming, in Proceedings of the International Deep Drawing Research Group. IDDRG Amsterdam (1972) [Google Scholar]
  14. ISO, Metallic materials - guidelines for the determination of forming-limit diagrams International Standard ISO 12004-2 (2019) [Google Scholar]
  15. SEP 1240, Testing and Documentation Guideline for the Experimental Determination of Mechanical Properties of Steel Sheets for CAE-Calculations (2006) [Google Scholar]
  16. ASTM E2218-15, ASTM Book of Standards, 1–15 (2015) [Google Scholar]
  17. D. Gutierrez, Strain path effects on the formability of AHSS evaluated by stretching test, in Proceedings of the International Deep Drawing Research Group. IDDRG (2009) [Google Scholar]
  18. M. Abspoel, E.H. Atzema, Inherent influence of strain path in Nakazima FLD testing, in Proceedings of International Deep Drawing Research Group. IDDRG, Mumbai, India (2011) [Google Scholar]
  19. S.K. Paul, J. Manuf. Process, 20, 291 (2015) [CrossRef] [Google Scholar]
  20. R. Mesrar, S. Fromentin, R. Makkouk, M. Martiny, G. Ferron, Int. J. of plasticity, 14, 391 (1998) [CrossRef] [Google Scholar]
  21. T.B. Stoughton, J.W. Yoon, Int. J. Solids Struct. 49, 3616 (2012) [CrossRef] [Google Scholar]
  22. S.K. Paul, J. Strain. Anal. Eng. Des. 48, 177 (2013) [CrossRef] [Google Scholar]
  23. K. Yoshida, T. Kuwabara, M. Kuroda, Int. J. Plast, 23, 361 (2007) [CrossRef] [Google Scholar]
  24. G. Glover, G.L. Duncan, J.D. Embury, Met. Tech. 4, 153 (1977) [CrossRef] [Google Scholar]
  25. D.J. Lloyd, H. Sang, J.D. Embury, Mater. Sci. Eng. C 36, 35 (1978) [CrossRef] [Google Scholar]
  26. R. Arrieux, C. Bedrin, M. Boivin, Determination of an intrinsec forming limit stress diagram for isotropic sheets, In Proceedings of the 12th International Deep Drawing Research Group. IDDRG (1982) [Google Scholar]
  27. T.B. Stoughton, Int. J. Mech. Sci. 42, 1 (1999) [Google Scholar]
  28. C.H.M. Simha, J. Gholipour, A. Bardelcik, M.J. Worswick, ASME.J. Eng. Mater. Technol. 129, 36 (2007) [CrossRef] [Google Scholar]
  29. D. Banabic, Int. J. Mater. Form. 13, 749 (2020) [CrossRef] [Google Scholar]
  30. H. Zhu, Z. He, Y. Lin, K. Zheng, X. Fan, S. Yuan, Int. J. Mech. Sci. 172, 105392 (2020) [CrossRef] [Google Scholar]
  31. T.N. Zaman, Effects of strain path changes on damage evolution and sheet metal formability, Doctoral dissertation, McMaster University, Hamilton, Ontario (2008) [Google Scholar]
  32. M. Grumbach, G. Sanz, Mem. Sci. Rev. Met. 11, 659 (1974) [Google Scholar]
  33. H. Aretz, Mater. Res. Proc. 41, 948 (2024) [CrossRef] [Google Scholar]
  34. C. Leppin, Application of a method to correct the effect of non-proportional strain paths on Nakajima test based forming limit curves. Proceedings of 7th Numisheet (2008) [Google Scholar]
  35. J. Min, T.B. Stoughton, J.E. Carsley, J. Lin, Int. J. Mech. Sci, 117, 115 (2016) [CrossRef] [Google Scholar]
  36. J. Noder, C. Butcher, Int. J. Mech. Sci, 163, 105138 (2019) [CrossRef] [Google Scholar]
  37. F. Cayssials, X. Lemoine, Predictive model of FLD (Arcelor model) upgraded to UHSS Steels, in Proceedings of the International Deep Drawing Research Group. IDDRG, Besançon, France (2005) [Google Scholar]
  38. Y.P. Korkolis, S. Kyriakides, Int. J. Plast. 25, 2059 (2009) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.