Open Access
| Issue |
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
|
|
|---|---|---|
| Article Number | 01034 | |
| Number of page(s) | 6 | |
| Section | Full Papers | |
| DOI | https://doi.org/10.1051/matecconf/202540801034 | |
| Published online | 07 May 2025 | |
- F. Del Pero, M. Delogu, M. Pierini, Procedia Structural Integrity 12 521 (2018) [CrossRef] [Google Scholar]
- D. Casellas, A. Lara, D. Frómeta, D. Gutiérrez, S. Molas, L. Perez, J. Rehrl, C. Suppan, Metall. Mater. Trans. A 48 86 (2017) [CrossRef] [Google Scholar]
- D. Frómeta, A. Lara, L. Grifé, T. Dieudonné, P. Dietsch, J. Rehrl, C. Suppan, D. Casellas, J. Calvo, Metall Mater Trans A 52 840 (2021) [CrossRef] [Google Scholar]
- J.I. Yoon, J. Jung, J.G. Kim, S.S. Sohn, S. Lee, H.S. Kim, J. Mater. Sci. 52 7808 (2017) [CrossRef] [Google Scholar]
- ISO 16630:2017(E) Metallic Materials -Sheet and Strip -Hole Expanding Test. [Google Scholar]
- E. Atzema, M. Borsutzki, M Braun, S. Brockmann et al., S. Proc. Int.Conf.: New Developments in Sheet Metal Forming, 171 (2012) [Google Scholar]
- P. Larour, H. Pauli, J. Freudenthaler, J. Lackner, F. Leomann, G. Schestak, IDDRG, 480 (2016) [Google Scholar]
- B. Hance, SAE Int. J. Engines, 10 247 (2017) [CrossRef] [Google Scholar]
- CWA 17793:2021, Test method for determination of the essential work of fracture of thin ductile metallic sheets [Google Scholar]
- D. Frómeta, N. Cuadrado, J. Rehrl, C. Suppan, T. Dieudonné, P. Dietsch, J. Calvo, D. Casellas, Mat. Sci. and Eng. A 802 140631 (2021) [CrossRef] [Google Scholar]
- D. Frómeta, S. Parareda, A. Lara, S. Molas, D. Casellas, P. Jonsén, J. Calvo, Eng. Frac. Mech. 229 106949 (2020) [CrossRef] [Google Scholar]
- P. Larour, J. Hinterdorfer, L. Wagner, J. Freudenthaler, A. Grünsteidl, M. Kerschbaum, IOP Conf. Ser. Mater. Sci. Eng. 1238 012041 (2022) [CrossRef] [Google Scholar]
- A. J. DeArdo, Metallurgical Transactions 8A 473 (1977) [CrossRef] [Google Scholar]
- D. F. Lentz: Proceedings of Sixteenth Mechanical Working and Steel Processing Conference, p. 397, TMS-AIME, New York, N.Y., (1974) [Google Scholar]
- H. Herø, J. Evensen, and J. D. Embury: Can. Metal Quart., 14, 117 (1975) [CrossRef] [Google Scholar]
- M. S. Joo, D.W. Suh and H.K.D.H Badheshia, ISIJ International 53 1305 (2013) [CrossRef] [Google Scholar]
- Y. Takahashi, O. Kawano and Y. Tanaka, Fracture Mechanical Study on Edge Flangeability of High Tensile-strength Steel Sheets, in: Proceedings from the Materials Science & Technology Conference, MS&T, 25-29, October 2009, Pittsburgh, Pennsylvania, USA (2009) [Google Scholar]
- D. Frómeta, A. Lara, S. Parareda, D. Casellas, AIP Conf. Proc. 2113 (2019) [Google Scholar]
- Industrial user guideline to effectively predict edge-cracking in Advanced High Strength Steels. https://cuttingedge-project.eu/download/industrialuser-guideline-to-effectively-predict-edgecracking-in-advanced-high-strength-steels/ [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.