Open Access
| Issue |
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
|
|
|---|---|---|
| Article Number | 01059 | |
| Number of page(s) | 6 | |
| Section | Full Papers | |
| DOI | https://doi.org/10.1051/matecconf/202540801059 | |
| Published online | 07 May 2025 | |
- G. M. Goodwin, SAE Technical Papers 380 (1968) [Google Scholar]
- D. W. A. Rees, J Mater Process Technol 118, 1 (2001) [CrossRef] [Google Scholar]
- N. Ayachi, N. Guermazi, C. H. Pham, and P. Y. Manach, Metals (Basel) 10, 1 (2020) [Google Scholar]
- A. Emanuela and M. Marion, Procedia Eng 183, 83 (2017) [CrossRef] [Google Scholar]
- J. Sahu, S. Chakrabarty, R. Raghavan, and S. Mishra, Journal of Strain Analysis for Engineering Design 53, 517 (2018) [CrossRef] [Google Scholar]
- C. Sudarsan, K. H. Banker, S. Hazra, R. Bhagat, and S. K. Panda, Advances in Materials and Processing Technologies 5, 25 (2019) [CrossRef] [Google Scholar]
- S. Basak, B. S. Katiyar, P. Orozco-Gonzalez, V. H. Baltazar-Hernandez, K. S. Arora, and S. K. Panda, International Journal of Advanced Manufacturing Technology 104, 1749 (2019) [CrossRef] [Google Scholar]
- M. Jain, J. Allin, X. Duan, and D. J. Lloyd, Materials Science and Engineering: A 390, 210 (2005) [CrossRef] [Google Scholar]
- J. Adamus, W. Więckowski, and P. Lacki, Materials 16, (2023) [Google Scholar]
- M. Ovsik, M. Bednarik, M. Reznicek, and M. Stanek, Lubricants 12, (2024) [Google Scholar]
- T. Chaimongkon, S. Panich, and V. Uthaisangsuk, International Journal of Advanced Manufacturing Technology 115, 3553 (2021) [CrossRef] [Google Scholar]
- H. Wang, Z. Wang, Y. Yan, and Y. Xu, Chinese Journal of Mechanical Engineering (English Edition) 36, (2023) [Google Scholar]
- S. Basak and S. K. Panda, International Manufacturing Science and Engineering Conference 49897, V001T02A063 (2016) [Google Scholar]
- A. Wessel, L. Morand, A. Butz, D. Helm, and W. Volk, Int J Mech Sci 275, (2024) [Google Scholar]
- M. Alizad Kamran and B. Mollaei Dariani, Journal of the Brazilian Society of Mechanical Sciences and Engineering 44, (2022) [CrossRef] [Google Scholar]
- M. Shakeri, A. Sadough, and B. M. Dariani, Proc Inst Mech Eng B J Eng Manuf 214, 821 (2000) [CrossRef] [Google Scholar]
- S. Basak and S. K. Panda, International Manufacturing Science and Engineering Conference 49897, V001T02A063 (2016) [Google Scholar]
- J. Sahu, S. Chakrabarty, R. Raghavan, and S. Mishra, Journal of Strain Analysis for Engineering Design 53, 517 (2018) [CrossRef] [Google Scholar]
- K. Rubešová, M. Rund, S. Rzepa, H. Jirková, Š. Jeníček, M. Urbánek, L. Kučerová, and P. Konopík, Metals (Basel) 11, 1 (2021) [Google Scholar]
- T. C. Cheng and R. S. Lee, J Mater Process Technol 253, 134 (2018) [CrossRef] [Google Scholar]
- M. Bhargava, S. Chakrabarty, V. K. Barnwal, A. Tewari, and S. K. Mishra, Mater Des 152, 65 (2018) [CrossRef] [Google Scholar]
- S. Chakrabarty, M. Bhargava, H. K. Narula, P. Pant, and S. K. Mishra, International Journal of Advanced Manufacturing Technology 106, 5085 (2020) [CrossRef] [Google Scholar]
- S. K. Mishra, S. M. Tiwari, A. M. Kumar, and L. G. Hector, Metall Mater Trans A Phys Metall Mater Sci 43, 1598 (2012) [CrossRef] [Google Scholar]
- J. Ma, M. Guo, C. Kan, Y. Zhang, L. Xu, Z. Yang, J. Wu, C. Liu, and J. Xu, Mater Today Commun 43, 111720 (2025) [CrossRef] [Google Scholar]
- A. A. Saleh, E. V. Pereloma, and A. A. Gazder, Acta Mater 61, 2671 (2013) [CrossRef] [Google Scholar]
- R. Narayanasamy and C. S. Narayanan, Mater Des 28, 1490 (2007) [CrossRef] [Google Scholar]
- K. Sedighiani, K. Traka, F. Roters, J. Sietsma, D. Raabe, and M. Diehl, Acta Mater 237, 118167 (2022) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.