Open Access
| Issue |
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
|
|
|---|---|---|
| Article Number | 01063 | |
| Number of page(s) | 6 | |
| Section | Full Papers | |
| DOI | https://doi.org/10.1051/matecconf/202540801063 | |
| Published online | 07 May 2025 | |
- A. Portevin, F. LeChatelier, C. R. Acad. Sci 176, 507 (1923) [Google Scholar]
- A. Kharimanidis, PhD Thesis, University of Erlangen-Nuremberg, Germany (2016) [Google Scholar]
- T. Naka, F. Yoshida, J. Mater. Process. Technol. 89-90, 19 (1999) [CrossRef] [Google Scholar]
- M. Abbadi, P. Hähner, A. Zeghloul, Mater. Sci. Eng. A 337.1-2, 194 (2002) [CrossRef] [Google Scholar]
- R.C. Picu, G. Vincze, F. Ozturk, J.J. Gracio, F. Barlat, A.M. Maniatty, Mater. Sci. Eng. A 390, 334 (2005) [CrossRef] [Google Scholar]
- A.H. Clausen, T. Borvik, O.S. Hopperstad, A. Benallal, J. mater. Sci. eng. 364, 260 (2004) [CrossRef] [Google Scholar]
- S. Klitschke, C. Fehrenbach, Experimentelle Untersuchungen zum Einfluss von Dehnrate und Spannungszustand auf den PLC-Effekt und das Crashpotenzial von 5xxx-Aluminiumlegierungen, in Proceedings of Tagung Werkstoffprüfung 2020, 179, 3-4 December 2020, online, Germany (2021) [Google Scholar]
- L.Z. Mansouri, J. Coer, S. Thuillier, H. Laurent, P.Y. Manach, Int. J. Mater. Form. (2019) [Google Scholar]
- D. Schmid, Bachelor-Thesis, Offenburg University of Applied Sciences, Germany (2023) [Google Scholar]
- ISO 12004-2:2021-02 (en), Metallic materials — Determination of forming-limit curves for sheet and strip — Part 2: Determination of forming-limit curves in the laboratory (2021) [Google Scholar]
- https://www.zeiss.de/messtechnik/systeme/optische-3d-messtechnik/3d-testing.html accessed february 16th 2025 [Google Scholar]
- S. Klitschke, W. Böhme, Mater. Test. 58 3, 173 (2016) [Google Scholar]
- L. Hauser, S. Klitschke, K.R. Riedmüller, M. Liewald (accepted to publish), Numerical model-ling of PLC effect induced flow figure formation during sheet metal forming of 5xxx aluminium alloys, The 13th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, 7-11 july 2025, Munich, Germany (2025) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.