Open Access
| Issue |
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
|
|
|---|---|---|
| Article Number | 01080 | |
| Number of page(s) | 4 | |
| Section | Full Papers | |
| DOI | https://doi.org/10.1051/matecconf/202540801080 | |
| Published online | 07 May 2025 | |
- G. Meschut, M. Merklein, A. Brosius, et al., J. Adv. Join. Process. 5, 100113 (2022) [CrossRef] [Google Scholar]
- G. Meschut, M. Merklein, A. Brosius, M. Bobbert, Prod. Eng. 16, 187 (2022) [CrossRef] [Google Scholar]
- S. Martin, A.A. Camberg, T. Tröster, Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion, in Proceedings of the 23rd International Conference on Material Forming, ESAFORM, (2020) [Google Scholar]
- S. Martin, T. Tröster, Joint point loadings in car bodies - the influence of manufacturing tolerances and scatter in material properties, in Proceedings of the 24th International Conference on Material Forming, ESAFORM, (2021) [Google Scholar]
- B. Schramm, S. Martin, C. Steinfelder, et al., J. Adv. Join. Process. 6, 100133 (2022) [CrossRef] [Google Scholar]
- X. He, STAM 18, 381 (2017) [Google Scholar]
- DVS-EFB 3480-1:2021-06, Prüfung von Verbindungseigenschaften - Prüfung der Eigenschaften mechanisch und kombiniert mittels Kleben gefertigter Verbindungen, German Welding Society / European Research Association for Sheet Metal Working, (2021) [Google Scholar]
- C. Steinfelder, A. Brosius, Experimental investigation of the cause and effect relationships between the joint and the component during clinching, in Proceedings of the 20th International Conference on Sheet Metal, SheMet, (2023) [Google Scholar]
- DVS-EFB 3420:2021-04, Clinching - Basics, German Welding Society / European Research Association for Sheet Metal Working, (2021) [Google Scholar]
- C. Steinfelder, J. Kalich, A. Brosius, U. Füssel, Numerical and experimental investigation of the transmission moment of clinching points, in Proceedings of the 40th International DeepDrawing Research Group Conference, IDDRG, (2021) [Google Scholar]
- H. Peng, C. Chen, X. Ren, J. Wu, Int. J. Adv. Manuf. Technol. 119, 99 (2022) [CrossRef] [Google Scholar]
- M. Carboni, S. Beretta, M. Monno, Eng. Fract. Mech. 73, 178 (2006) [CrossRef] [Google Scholar]
- G. Cantisani, G. De. Corte, In-plane Shear ForceDisplacement Modelling of Steel Trapezoidal Sheeting, in Proceedings of the 4th International Workshop on the Seismic Performance of Non- Structural Elements, SPONSE, (2019) [Google Scholar]
- L. Ewenz, C.R. Bielak, M. Otroshi, et al., Prod. Eng. 16, 305 (2022) [CrossRef] [Google Scholar]
- S. Martin, K. Kurtusic, T. Tröster, KEM 926, 1505 (2022) [CrossRef] [Google Scholar]
- J. Mucha, W. Witkowski, Thin-Walled Struct. 66, 39 (2013) [CrossRef] [Google Scholar]
- S. Martin, Holistische Methode zur elastischen Auslegung von geclinchten Bauteilen, PhD thesis, Paderborn, (2024) [Google Scholar]
- C. Steinfelder, A. Brosius, A New Approach for the Evaluation of Component and Joint Loads Based on Load Path Analysis, in Proceedings of the 12th Congress of the German Academic Association for Production Technology, WGP, (2020) [Google Scholar]
- C. Zirngibl, S. Martin, C. Steinfelder, et al., Methodical approach for the design and dimensioning of mechanical clinched assemblies, in Proceedings of the 20th International Conference on Sheet Metal, SheMet, (2023) [Google Scholar]
- S. Martin, C.R. Bielak, M. Bobbert, et al., Prod. Eng. 16, 261 (2022) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.