Open Access
| Issue |
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
|
|
|---|---|---|
| Article Number | 01078 | |
| Number of page(s) | 5 | |
| Section | Full Papers | |
| DOI | https://doi.org/10.1051/matecconf/202540801078 | |
| Published online | 07 May 2025 | |
- F. Yoshida, T. Uemori, Int. J. Plast. 18, 661 (2002) [CrossRef] [Google Scholar]
- F. Yoshida, T. Uemori, K. Fujiwara, Int. J. Plast. 18, 633 (2002) [CrossRef] [Google Scholar]
- F. Yoshida, T. Uemori, Int. J. Mech. Sci. 45, 1687 (2003) [CrossRef] [Google Scholar]
- W. Kubli, A. Krasovskyy, M. Sester, Modeling of reverse loading effects including workhardening stagnation and early re-plastification in Proceedings of The European Scientific Association for material FORMing, ESAFORM, 22-25 April 2008, Lyon, France (2008) [Google Scholar]
- W. Kubli, A. Krasovskyy, M. Sester, Advanced modeling of reverse loading effects for sheet metal forming processes, in Proceedings of International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET, 1-5 September 2008, Interlaken, Switzerland (2008) [Google Scholar]
- P.A. Eggersten, K. Mattiasson, Material Modelling for Accurate Springback Prediction, in Proceedings of The European Scientific Association for material FORMing, ESAFORM, 27-29 April 2009, Twente, Netherland (2009) [Google Scholar]
- P.A. Eggersten, K. Mattiasson, Int. J. Mech. Sci. 51, 547 (2009) [CrossRef] [Google Scholar]
- X. Lemoine, Q. Chichery, J.M. Devin, P. Duroux, Identification Protocol of Yoshida-Uemori Hardening Model, in Proceedings of the International Deep Drawing Research Group, IDDRG, 6-10 June 2022, Lorient, France (2022) [Google Scholar]
- X. Lemoine, J.M. Devin, Impact of elastic modulus evolution on springback prediction, in Proceedings of the International Deep Drawing Research Group, IDDRG, 19-22 June 2023, Luleâ, Sweden (2023) [Google Scholar]
- ISO 6892-1:2016 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature. [Google Scholar]
- Automotive ArcelorMittal flat products catalogue: https://automotive.arcelormittal.com/products/flat/third_gen_AHSS/fortiform [Google Scholar]
- X. Lemoine, J.M. Devin, Influence of Yoshida- Uemori model on springback prediction, in Proceedings of The Minerals, Metals & Material Society, TMS, 3-7 March 2024, Orlando, USA (2024) [Google Scholar]
- Automotive ArcelorMittal flat products catalogue: https://automotive.arcelormittal.com/products/flat/first_gen_AHSS/TRIP [Google Scholar]
- F. Placidi, X. Lemoine, E. Till, H. Georgi, Assessment and prediction of spring-back behaviour for high-strength steels, in Final report of RFCS EUR22835 (2007) [Google Scholar]
- X. Lemoine, R. Munier, X. Bellut, A robust identification protocol of flow curve adjusting parameters using uniaxial tensile curve, in Proceedings of The European Scientific Association for material FORMing, ESAFORM, 24-26 April 2024, Toulouse, France (2024) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.