Open Access
Issue
MATEC Web Conf.
Volume 408, 2025
44th Conference of the International Deep Drawing Research Group (IDDRG 2025)
Article Number 01074
Number of page(s) 6
Section Full Papers
DOI https://doi.org/10.1051/matecconf/202540801074
Published online 07 May 2025
  1. H. Gatterer, S. Tewes, Megatrend Research (Murmann Publishers GmbH, 2023) [Google Scholar]
  2. A. Mittrowann, Access Int. J. Nepal Libr. Assoc. 2, 1 (2023) [CrossRef] [Google Scholar]
  3. J. Hopewell, R. Dvorak, E. Kosior, Philos. Trans. R. Soc. B Biol. Sci. 364, 2115 (2009) [CrossRef] [PubMed] [Google Scholar]
  4. B.R. Scheffers, T.C. Wanger, Front. Ecol. Environ. 9, 151 (2011) [CrossRef] [Google Scholar]
  5. H. Mangold, B. von Vacano, Macromol. Chem. Phys. 223, 2100488 (2022) [CrossRef] [Google Scholar]
  6. L.B. Dollischek, P. Frohn-Sörensen, F. Kurz, B. Engel, J. Clean. Prod. 471, 143416 (2024) [CrossRef] [Google Scholar]
  7. M. Schiller, P. Frohn-Sörensen, B. Engel, 3D- Swivel-Bending—A Flexible and Scalable Forming Technology, in NUMISHEET 2022 (eds. Inal, K., Levesque, J., Worswick, M. & Butcher, C.) 125 (Springer International Publishing, 2022) [CrossRef] [Google Scholar]
  8. D.Y. Yang, M. Bambach, J. Cao, J.R. Duflou, P. Groche, T. Kuboki, A. Sterzing, A.E. Tekkaya, C.W. Lee, CIRP Ann. 67, 743 (2018) [CrossRef] [Google Scholar]
  9. G. Schuh, G. Bergweiler, F. Fiedler, D. Neumann, L. Heetfeld, P. Bickendorf, Potential Analysis of Flexible Small Series Production of Spare Parts by Direct Polymer Additive Tooling (2021) [Google Scholar]
  10. M. Fera, R. Macchiaroli, F. Fruggiero, A. Lambiase, Int. J. Adv. Manuf. Technol. 95, 673 (2018) [CrossRef] [Google Scholar]
  11. T. Kotzian, P. Frohn-Sörensen, D. Nebeling, B. Engel, Int. J. Adv. Manuf. Technol. 136, 3249 (2025) [CrossRef] [Google Scholar]
  12. A. Gebhardt, Rapid prototyping - rapid tooling - rapid manufacturing (Carl Hanser München, 2007) [Google Scholar]
  13. N. Nakamura, K. Mori, Y. Abe, Int. J. Adv. Manuf. Technol. 108, 975 (2020) [CrossRef] [Google Scholar]
  14. F. Abe, K. Osakada, M. Shiomi, K. Uematsu, M. Matsumoto, J. Mater. Process. Technol. 111, 210 (2001). [CrossRef] [Google Scholar]
  15. G. Davies, Materials for Automobile Bodies (Butterworth-Heinemann, 2012) [Google Scholar]
  16. A. Al Rashid, M. Koç, Mater. Today Sustain. 24, 100529 (2023) [Google Scholar]
  17. R. Boom, R. Steffen, Steel Res. 72, 91 (2001). [CrossRef] [Google Scholar]
  18. J.R. Duflou, K. Wegener, A.E. Tekkaya, M. Hauschild, F. Bleicher, J. Yan, B. Hendrickx, CIRP Ann. 73, 695 (2024) [CrossRef] [Google Scholar]
  19. D. Raabe, et al., Prog. Mater. Sci. 128, 100947 (2022) [CrossRef] [Google Scholar]
  20. D.S. Wong, P. Lavoie, JOM 71, 2926 (2019) [CrossRef] [Google Scholar]
  21. A. Kampker, J. Triebs, S. Kawollek, P. Ayvaz, T. Beyer, Rapid Prototyp. J. 25, 1575 (2019) [CrossRef] [Google Scholar]
  22. M.E. Grigore, Recycling 2, 24 (2017) [CrossRef] [Google Scholar]
  23. K.N. Gunasekaran, V. Aravinth, C.B. Muthu Kumaran, K. Madhankumar, S. Pradeep Kumar, Mater. Today Proc. 45, 1849 (2021) [CrossRef] [Google Scholar]
  24. P. Frohn-Sörensen, M. Geueke, B. Engel, B. Löffler, P. Bickendorf, A. Asimi, G. Bergweiler, G. Schuh, Polymers 14, 1694 (2022) [CrossRef] [Google Scholar]
  25. A.M. Habraken et al., Int. J. Mater. Form. 15, 61 (2022) [CrossRef] [Google Scholar]
  26. J.P.M. Sousa, (2019). at <https://repositorio-aberto.up.pt/handle/10216/121909> [Google Scholar]
  27. M. Geueke, R. Steinheimer, P. Frohn-Sörensen, M. Schiller, B. Engel, Sustainable tool technology: Wood-based forming tools for deep drawing of sheet metal, in IOP Conf. Ser. Mater. Sci. Eng. 1307, 012018 (2024) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.