MATEC Web of Conferences

Muhammad Usman, Azhar Hussain, Muhammad Najam UL Hassan, Ali Nasir, Ramzan Abdul Karim, Muhammad Yasir, Aneela Wakeel, Abdul Moiz Rao, Muhammad Ahmed, Muhib Ullah and Khurram Imran

Published online: 25 June 2024

DOI: https://doi.org/10.1051/matecconf/202439801039

Open Access

Influence of Band Alignment, Electric Field, Layer Thickness, Temperature, Series Resistance, and Shunt Resistance on Lead-Free Double Perovskite Solar Cells with Spiro-OMeTAD: A SCAPS-1D Simulation Study 01040

Imama Ibrar, T.A. Qasuria, Zafir Salah Ud Din and Malik Raed Zamindar

Published online: 25 June 2024

DOI: https://doi.org/10.1051/matecconf/202439801040

MATEC Web of Conferences

Volume 398 (2024)

2nd International Conference on Modern Technologies in Mechanical & Materials Engineering (MTME-2024)

Supplementary material

Statement of Peer review

Preface 00001

Effect of Convergent Angle on different Flow Parameters of a Convergent-Divergent Nozzle 01001

Measurement of frictional torque of a directacting valvetrain using a shaft-to-shaft torque transducer to study the effect of Laser Surface Texturing on friction reduction 01002

Use of a mathematical model to predict solar still performance at different times of a year 01003

Effect of Nozzle Shape on Fluid Flow and Heat Transfer characteristics of an Impinging Jet System – A Numerical Study 01004

Design, fabrication and thermal analysis of parabolic trough collector 01005

Modeling and Control of Two Degree of Freedom Bionic Foot 01006

Reliability analysis of CRAC system of a modern Data centre via Kriging algorithm 01007

Fuel Performance Comparison of Uranium Nitride and Uranium Carbide in VVER-1200 using OpenMC 01008

Investigating Stacking Configuration and Fiber Hybridization Effects on Low-Velocity Impact Behavior in Twill Woven Carbon/Flax Composites 01009

Design and Development of Power Generation System for Thermo-Acoustically Driven Devices 01010

Searching Heuristically Optimal Path Using a New Technique of Bug0 Algorithm in Swarm Robotics 01011

Material Selection in Additive Manufacturing for Aerospace Applications using Multi-Criteria Decision Making 01012

Optimization of Impact Resistant Throwable Unmanned Ground Vehicle Using Mathematical Modeling Techniques 01013

Impact Testing of Different Materials on Wheels Used in Throwable Unmanned Ground Vehicles 01014

Optimizing Industrial Processes in Beverages and Aerospace Sector: A Case Study Analysis 01015

Parametric analysis of various design factors on characteristic performance of Non-Pneumatic Tyres 01016

Mitigation of hanger pin failure in Pakistan railway carriage system by the application of COMSOL Multiphysics 01017

Energy and Exergy Analysis of Forced Convection Solar Drying of Allium Sativum With and With Out Sensible Heat Storage 01018

Design and Fabrication of PVC Pipe Cutting Machine with Hot Wire Mechanism 01019

Droplet Actuation Enhancement through Voltage Control and Hydrophobic Coating Selection 01020

Design and analysis of X-band metamaterial absorber 01021

Influence of Inclined Chip Angles on Dynamic Contact Angle Variations in Digital Microfluidics 01022

Fluid and aero-acoustic analysis of internal bays: Geometric length-to-depth effects 01023

Investigation for optimal hybrid concrete blended with polypropylene and steel fiber to evaluate structural performance 01024

Portable Solar-Station with Integrated Battery Management and Load Monitoring System 01025

Effect of displacing the separation plate on the heat exchange effectiveness of unglazed double skin transpired solar collector 01026

Development and analysis of a smart cold storage system for fruit warehouses 01027

Experimental Investigation of Vacuum Membrane Distillation (VMD) Performance Based on Operational Parameters for Clean Water Production 01028

Artificial Neural Network-Based Color Contrast Recommendation System 01029

Significance of Infill Density on Mechanical Performance in Fused Deposition Modeling 01030

Development in Heavy Metal Ions Detection: Antimony-Hydroxyapatite Modified Electrodes Coupled with Square Wave Anodic Stripping Voltammetry 01031

Durability Assessment of Recycled Aggregate Geopolymer Concrete Mixed with Wastewater 01032

Application of Artificial Neural Networks for Predicting Axial Strain of FRP-Confined Concrete 01033

Axial Strength Model for FRP Confined Concrete-Filled Steel Tube Columns 01034

A Theoretical Model for Predicting Axial Compressive Strain of FRP-Confined Concrete 01035

Development of Self-Compacting Geopolymer Concrete Using Fayalite Slag Aggregates 01036

A facile synthesis of nano-magnesia by ultrasonication assisted co-precipitation method for antibacterial activity 01037

Tensile and Flexural Properties of Recycled HDPE for Application in Building Products 01038

Parametric Modeling for Activated Carbon Synthesis 01039

Influence of Band Alignment, Electric Field, Layer Thickness, Temperature, Series Resistance, and Shunt Resistance on Lead-Free Double Perovskite Solar Cells with Spiro-OMeTAD: A SCAPS-1D Simulation Study 01040

2^nd International Conference on Modern Technologies in Mechanical & Materials Engineering (MTME-2024)