EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 398 (2024) MATEC Web Conf., 398 (2024) 01038 References
Open Access
Issue
MATEC Web Conf.
Volume 398, 2024
2nd International Conference on Modern Technologies in Mechanical & Materials Engineering (MTME-2024)
Article Number 01038
Number of page(s) 8
DOI https://doi.org/10.1051/matecconf/202439801038
Published online 25 June 2024
  1. Praveenkumar, T., et al., Current technologies for plastic waste treatment for energy recovery, it’s effects on poly aromatic hydrocarbons emission and recycling strategies. Fuel, 2024. 357: p. 129379. [CrossRef] [Google Scholar]
  2. Hoellein, T., et al., Anthropogenic litter in urban freshwater ecosystems: distribution and microbial interactions. PloS one, 2014. 9(6): p. e98485. [CrossRef] [Google Scholar]
  3. Green Earth Recycling. Available from: https://greenearthrecycling.com/products.htm. [Google Scholar]
  4. Schyns, Z.O. and M.P. Shaver, Mechanical recycling of packaging plastics: A review. Macromolecular rapid communications, 2021. 42(3): p. 2000415. [CrossRef] [Google Scholar]
  5. Anand Kumar, S. and Y. Shivraj Narayan. Tensile testing and evaluation of 3Dprinted PLA specimens as per ASTM D638 type IV standard. in Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018) Volume 2. 2019. Springer. [Google Scholar]
  6. Kanu, R.C., C. Hale, and P.O.N. Piper. The use of 3D printing to introduce students to ASTM standards for testing tensile properties of acrylonitrile-butadiene-styrene (ABS) plastic material. in 2016 ASEE Annual Conference & Exposition. 2016. [Google Scholar]
  7. Handayani, S.U., et al., Mechanical properties of commercial recycled polypropylene from plastic waste. Journal of Vocational Studies on Applied Research, 2021. 3(1): p. 1–4. [CrossRef] [Google Scholar]
  8. Miller, A., C. Brown, and G. Warner, Guidance on the use of existing ASTM polymer testing standards for ABS parts fabricated using FFF. Smart and Sustainable Manufacturing Systems, 2019. 3(1). [Google Scholar]
  9. Hernandez, R., et al., Analyzing the tensile, compressive, and flexural properties of 3D printed ABS P430 plastic based on printing orientation using fused deposition modeling. 2016. [Google Scholar]
  10. Pastrnak, A., A. Henriquez, and V. La Saponara, Parametric study for tensile properties of molded high‐density polyethylene for applications in additive manufacturing and sustainable designs. Journal of Applied Polymer Science, 2020. 137(42): p. 49283. [CrossRef] [Google Scholar]
  11. Afzal, Q., et al., Characterization of sustainable interlocking burnt clay brick wall panels: An alternative to conventional bricks. Construction and Building Materials, 2020. 231: p. 117190. [CrossRef] [Google Scholar]
  12. Alam, Z., et al., An Insight into the Characteristics of the September 24, 2019, MW 5.8 Mirpur, Pakistan, Earthquake and Reconnaissance of the Induced-Failure Modes in Buildings and Civil Infrastructure Facilities. Practice Periodical on Structural Design and Construction, 2023. 28(4): p. 05023005. [CrossRef] [Google Scholar]
  13. Damayanti, D., et al., Current Prospects for Plastic Waste Treatment. Polymers. 14 (15), 3133. 2022. [CrossRef] [Google Scholar]
  14. Kazemi, M., S.F. Kabir, and E.H. Fini, State of the art in recycling waste thermoplastics and thermosets and their applications in construction. Resources, Conservation and Recycling, 2021. 174: p. 105776. [CrossRef] [Google Scholar]
  15. Chen, H., et al., Recycling thermoset plastic waste for manufacturing green cement mortar. Cement and Concrete Composites, 2023. 137: p. 104922. [CrossRef] [Google Scholar]
  16. Soni, A., et al., Development of sand-plastic composites as floor tiles using silica sand and recycled thermoplastics: a sustainable approach for cleaner production. Scientific reports, 2022. 12(1): p. 18921. [CrossRef] [Google Scholar]
  17. Duggal, P., et al. Use of waste plastic in wearing course of flexible pavement. in Advances in Structural Engineering and Rehabilitation: Select Proceedings of TRACE 2018. 2020. Springer. [Google Scholar]
  18. Appiah, J.K., V.N. Berko-Boateng, and T.A. Tagbor, Use of waste plastic materials for road construction in Ghana. Case studies in construction materials, 2017. 6: p. 1–7. [CrossRef] [Google Scholar]
  19. Single Screw Extruder. Available from: https://www.shutterstock.com/image-vector/single-screw-extruder-diagram-parts-2362046797. [Google Scholar]
  20. ASTM D638-22 Standard Test Method for Tensile Properties of Plastics. 2022, ASTM International: West Conshohocken, PA. [Google Scholar]
  21. ASTM D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. 2017, ASTM International: West Conshohocken, PA. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.