Open Access
Issue
MATEC Web Conf.
Volume 398, 2024
2nd International Conference on Modern Technologies in Mechanical & Materials Engineering (MTME-2024)
Article Number 01021
Number of page(s) 8
DOI https://doi.org/10.1051/matecconf/202439801021
Published online 25 June 2024
  1. W.-H. Choi, J.-B. Kim, J.-H. Shin, T.-H. Song, W.-J. Lee, Y.-S. Joo, and C.-G. Kim, “Circuit-analog (ca) type of radar absorbing composite leading-edge for wing-shaped structure in x-band: practical approachfrom design to fabrication,” Composites science and technology, vol. 105, pp. 96–101, 2014. [CrossRef] [Google Scholar]
  2. S. Ghosh, S. Bhattacharyya, and K. V. Srivastava, “Design, characterisation and fabrication of a broadband polarisation-insensitive multi-layer circuit analogue absorber,” IET Microwaves, Antennas & Propagation, vol. 10, no. 8, pp. 850–855, 2016 [CrossRef] [Google Scholar]
  3. Y. Shang, Z. Shen, and S. Xiao, “On the design of single-layer circuit analog absorber using double-square-loop array,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 12, pp. 6022–6029, 2013. [CrossRef] [Google Scholar]
  4. T. J. Prince, E. J. Riley, and S. W. Miller, “Additive manufacturing of pla-based microwave circuit-analog absorbers,” IEEE Transactions on Electromagnetic Compatibility, vol. 63, no. 5, pp. 1341–1346, 2021. [CrossRef] [Google Scholar]
  5. X. Yao, Y. Huang, G. Li, Q. He, H. Chen, X. Weng, D. Liang, J. Xie, and L. Deng, “Design of an ultra-broadband microwave metamaterial absorber based on multilayer structures,” International Journal of RF and Microwave Computer-Aided Engineering, vol. 32, no. 8, p. e23222, 2022 [Google Scholar]
  6. S. Ghosh, S. Bhattacharyya, and K. V. Srivastava, “Design, characterisation and fabrication of a broadband polarisation-insensitive multi-layer circuit analogue absorber,” IET Microwaves, Antennas & Propagation, vol. 10, no. 8, pp. 850–855, 2016 [CrossRef] [Google Scholar]
  7. R. Jaiswar, F. Mederos-Henry, V. Dupont, S. Hermans, J.-P. Raskin, and I. Huynen, “Inkjet-printed frequency-selective surfaces based on carbon nanotubes for ultra-wideband thin microwave absorbers,” Journalof Materials Science: Materials in Electronics, vol. 31, no. 3, pp. 2190–2201, 2020. [CrossRef] [Google Scholar]
  8. Y. Cui, S. A. Nauroze, and M. M. Tentzeris, “Novel 3d-printed reconfigurable origami frequency selective surfaces with flexible inkjetprinted conductor traces,” in 2019 IEEE MTT-S International Microwave Symposium (IMS), pp. 1367–1370, IEEE, 2019. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.