Issue |
MATEC Web Conf.
Volume 398, 2024
2nd International Conference on Modern Technologies in Mechanical & Materials Engineering (MTME-2024)
|
|
---|---|---|
Article Number | 01004 | |
Number of page(s) | 14 | |
DOI | https://doi.org/10.1051/matecconf/202439801004 | |
Published online | 25 June 2024 |
Effect of Nozzle Shape on Fluid Flow and Heat Transfer characteristics of an Impinging Jet System – A Numerical Study
1 MED, Faculty of MME, NED University of Engineering & Technology, Karachi 75270, Pakistan
2 Energy & Power, School of Water, Energy & Environment, Cranfield University, Cranfield MK43 0AL, UK
Impinging jet is one of the most efficient techniques to achieve a high heat transfer coefficient and is used in many engineering applications. The present study focuses on the effect of nozzle shape on fluid behavior and heat transfer characteristics. For the current investigation, circular, square, rectangular, and elliptical nozzles with identical hydraulic diameters are used with Reynolds number Re ranging from 15,000–35,000. The circular nozzle results are validated with the published numerical and experimental data. In the current study, it is found that as the Reynolds number increases, the value of the averaged Nusselt number increases in all circumstances. When examining the different nozzle shapes, the value of the averaged Nusselt number is higher when an elliptical nozzle is used. The contours of the surface Nusselt number and velocity streamlines are also presented. The contour shows that the heat flux is highest in the stagnation zone and gradually decreases to the sides because they are outside the impingent coverage. Moreover, the area between the jets has a low heat flux. The heat transfer in the impinging zone is initially raised as the jet-induced crossflow increases and achieves a peak value, and then reduced stream-wise because of the crossflow effect.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.