EDPS Account

Volume 172 (2018)

Free Access to the whole issue

MATEC Web of Conferences

Volume 172 (2018)

3^rd International Conference on Design, Analysis, Manufacturing and Simulation (ICDAMS 2018)

Chennai, India, April 6-7, 2018
V. Jayakumar, S. Ranganathan, D. Devika and S. Sridevi (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 12 June 2018

PDF (53.0 KB)

Open Access

Preface 00001

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817200001

Fluids Engineering

Open Access

Recirculating flows analysis and estimation inside channels 01001

Christina G. Georgantopoulou, Nikolaos S. Vasilikos and George A. Georgantopoulos

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201001

Open Access

Slug-bubble regime identification in a square channel using a IR Sensor 01002

S Aafrin Sulthana., T Marieswaran., N Braghadesh., N Mithran. and M Venkatesan.

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201002

Open Access

Drag reduction in a class 8 truck - scaled down model 01003

R Vishwa Krishna., R Suwathy., M Pragadeesh. and M Venkatesan.

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201003

Open Access

Investigation of efficacy of low length-to-diameter ratio and nozzle pressure ratio on base pressure in an abruptly expanded flow 01004

Fharrukh Ahmed and S. A. Khan

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201004

Open Access

Sloshing response of partially filled rectangular tank under periodic horizontal ground motion. 01005

Amiya Pandit and Kishore Chandra Biswal

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201005

Open Access

Numerical investigation of hybrid blend design target bullets 01006

V R Muruganantham and T Babin

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201006

Open Access

Recent advancements in shape optimization of aero spiked high speed re-entry vehicle using CFD 01007

Harish Panjagala, E L N Rohit Madhukar and I Ravi Kiran

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201007

Open Access

Numerical model for concentration measurement during decomposition of H₂O₂ over silver catalyst 01008

KB Sanjay Vasanth., G Gokul Raj. and M Venkatesan

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201008

Open Access

Methods of computational modeling of coronary heart vessels for its digital twin 01009

Ilya Naplekov, Ivan Zheleznikov, Dmitry Pashchenko, Polina Kobysheva, Anna Moskvitina, Ravil Mustafin, Maria Gnutikova, Alina Mullagalieva and Pavel Uzlov

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201009

Open Access

Study of Flow Induced Noise in Vertical Inline Pump Using Lighthill Analogy 01010

Stephen Christopher, Shouqi Yuan, Ji Pei, G Xing Cheng and Wang Yiyun

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817201010

Heat Transfer

Open Access

Enhancement of heat transfer in phase change material using graphite-paraffin composites 02001

R Sathiyaraj., R Rakesh., N Mithran. and M Venkatesan.

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817202001

Open Access

A Simulation study of cooling system for heavy duty diesel engine 02002

Pranita Adsul, Vinod Kotebavi, Sanjeev Bedekar and Ashwini Mishra

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817202002

Open Access

Analytical Performance Analysis of Cross Flow Louvered Fin Automobile Radiator 02003

R Badgujar Pankaj, S Rangarajan and S. R Nagaraja

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817202003

Open Access

Estimation of Effective Thermal Conductivity of Two-Phase Material for Hollow Circular Model 02004

Prateek Kumar Sahu, Nisha Netam and Lal Chandra Shah

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817202004

Open Access

Performance investigation of a rotary heat exchanger installed with four ducts using computational fluid dynamics 02005

Saneesh Nair, Vinod Kotebavi and Alokekumar Das

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817202005

Open Access

Evaluation of critical blockage ratio and pulse length in a pulse detonation engine using CFD and MATLAB 02006

S. Srikrishnan, P. K. Dash and V. Jayakumar

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817202006

Open Access

Impact of nano-silicon fuel additive on combustion, performance and emission of a twin cylinder CI engine 02007

S A Anand Kumar, V Raja, R P Dhivakar Raviram and G Sakthinathan

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817202007

Design Engineering

Open Access

Numerical Estimation of Notch Stress Intensity Factors of Sharp V-Notches 03001

Mirzaul Karim Hussain and K.S.R.K. Murthy

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203001

Open Access

Effect of material properties on optimal radial strain gage locations in sharp V-notched configurations 03002

Pranjol Paul, K.S.R. Krishna Murthy and Debabrata Chakraborty

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203002

Open Access

A Pioneering Tactic for Sustainable Waste Management: Design of a Cost-Effective Recycling Machine 03003

A. Agarwal

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203003

Open Access

Study on Fatigue Life of Heat-treated Aluminium alloy coated with Castor oil. 03004

A. Sivasubramanian, T.S. Kirubasankar and S. Vinoth kumar

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203004

Open Access

Fatigue life prediction under mixed-mode loading using equivalent stress intensity factor models 03005

S. Sajith, K.S.R. K. Murthy and P.S. Robi

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203005

Open Access

Design & Weight Optimization of a Wheel Rim for Sport Utility Vehicle. 03006

Harish Panjagala, Balakrishna M, Shasikant Kushnoore and E L N Rohit Madhukar

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203006

Open Access

Mechanical Design and Analysis of Hybrid Mobile Robot with Aerial and Terrain Locomotion Capability 03007

Monish Koshy, S. Sreevishnu, Anjai Krishnan and Gautham P. Das

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203007

Open Access

Kinematic Design, Analysis and Simulation of a Hybrid Robot with Terrain and Aerial Locomotion Capability 03008

S. Sreevishnu, Monish Koshy, Anjai Krishnan and Gautham P. Das

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203008

Open Access

Parametric study on free vibration and instability of a functionally graded cracked shaft in a rotor-disc-bearing system: finite element approach 03009

Debabrata Gayen, Debabrata Chakraborty and Rajiv Tiwari

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203009

Open Access

Free vibration characteristics of thick doubly curved variable stiffness composite laminated shells using higher-order shear deformation theory 03010

Anand Venkatachari and K. Ramajeyathilagam

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817203010

Manufacturing Engineering

Open Access

Diagnostic System to Determine Lining Condition 04001

Vitaliy Yemelyanov, Nataliya Yemelyanova and Alexey Nedelkin

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204001

Open Access

Experimentation and simulation process of friction stir welding for lightweight similar and dissimilar materials 04002

Variavel. M, Pugazhenthi. R and Jayakumar. V

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204002

Open Access

Evaluation of mechanical properties of friction stir welded commercially pure aluminium 04003

S. Suresh Kumar, B. Ravisankar, Vishnu Chandar. S and R.P. Dhivakar Raviram

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204003

Open Access

Selection of cutting parameters for the machinability of Inconel 718 using Grey Relational Analysis 04004

Ivan Sunit Rout and P. Pal Pandian

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204004

Open Access

An Assessment on Additive Manufacturing Technique to Fabricate Integral PEM Fuel Cell/Electrolyser Component 04005

Arunkumar Jayakumar

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204005

Open Access

Utility approach for multi target streamlining of process parameters in wire EDM 04006

A. Muniappan, M. Ajithkumar, V. Jayakumar, C. Thiagarajan and M. Sreenivasulu

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204006

Open Access

Optimization of electric discharge machining parameters on titanium alloy (ti-6al-4v) using Taguchi parametric design and genetic algorithm 04007

K. Umanath and D. Devika

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204007

Open Access

Optimization of WEDM process during machining of Al-Al₂O₃ composite using Taguchi based Grey Relational Analysis 04008

Aaryan Mohan Singla, Shubhang Sharma, Akshay Kaul and G. Rajyalakshmi

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204008

Open Access

Study of hardness and flexural strength of banyan and peepal fibre reinforced hybrid composites 04009

V. Durga Prasada Rao, G. Moses Dayan and V. Navya Geethika

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204009

Open Access

Modeling and experimental investigation of process parameters in WEDM for surface roughness using regression model 04010

A. Muniappan, R. Senthilkumar, V. Jayakumar, S. Venkata Ravikumar and P. Sai Tarunkumar

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817204010

Industrial Engineering

Open Access

The Transition towards Sustainable Supply Chain Management: An Empirical Study 05001

Amrita Singh, Parul Agarwal, Saurav Dixit, Sonali Singh and Sanjai Sahai

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817205001

Open Access

Key Benefits of Adopting Lean Manufacturing Principles in Indian Construction Industry 05002

Subhav Singh, Saurav Dixit, Sanjay Sahai, Ameet Sao, Yogesh Kalonia and Raja Subramanya Kumar

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817205002

Open Access

Perceptions on service quality: A study of old age homes in Kerala and Tamil Nadu 05003

Devika Anil and K Hemamala

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817205003

Open Access

Service Failures and Recovery Strategies in E-tailing: Examining the effects of Product Type and Transaction Frequency 05004

Rini Miriam Vincy and Dr. Hemamala K

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817205004

Open Access

Musculoskeletal & Risk Assessment during Threshing of Rice-grains 05005

Debesh Mishra and Suchismita Satapathy

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817205005

Energy Systems

Open Access

Role of Solar energy and issues in its implementation in the Indian context 06001

Saurav Dixit, Subhav Singh, Sonali Singh, Richu George Varghese, Amit Kumar Pandey and Deekshant Varshney

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817206001

Open Access

Effect of Blade Profiles on the performance of Bidirectional Wave Energy Turbine 06002

P.Madhan Kumar and Abdus Samad

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817206002

Open Access

Review of Energy Status and Associated Conservational Issues in Botswana 06003

A. Agarwal, O.M. Seretse, M.T. Letsatsi and E. Dintwa

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817206003

Open Access

Design, Modelling and Experimental Investigation of an Economic Domestic STHW System Using T*Sol® Simulation in Botswana 06004

O.M. Seretse, A. Agarwal, M.T. Letsatsi, O.M. Moloko and M.S. Batlhalefi

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817206004

Open Access

Performance evaluation of a 15 kW_th biomass gasifier in downdraft and updraft operating modes: an experimental study 06005

K. Shanmuganandam, J. Anichai and V. Jayakumar

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817206005

Open Access

A PMV-PPD model based study of thermal comfort in Low-Income Group house in Chhattisgarh 06006

Nisha Netam, Shubhashis Sanyal and Shubhankar Bhowmick

Published online: 12 June 2018

DOI: https://doi.org/10.1051/matecconf/201817206006