Open Access
Issue
MATEC Web of Conferences
Volume 172, 2018
3rd International Conference on Design, Analysis, Manufacturing and Simulation (ICDAMS 2018)
Article Number 04005
Number of page(s) 7
Section Manufacturing Engineering
DOI https://doi.org/10.1051/matecconf/201817204005
Published online 12 June 2018
  1. C.R. Deckard, Method and apparatus for producing parts by selective sintering. 1989, Google Patents. [Google Scholar]
  2. N. Guo and M.C. Leu, Frontiers of Mechanical Engineering, 2013. 8(3): p. 215-243. [CrossRef] [Google Scholar]
  3. N.B. Dahotre, and S. Harimkar, Laser fabrication and machining of materials. 2008: Springer Science & Business Media. [Google Scholar]
  4. J.C. Nelson, 1993, University of Texas at Austin. [Google Scholar]
  5. M. Ay, A. Midilli, and I. Dincer, International journal of energy research, 2006. 30(5): p. 307-321. [CrossRef] [Google Scholar]
  6. G. Sasikumar, A. Muthumeenal, S. SundarPethaiah, N. Nachiappan, R. Balaji, International Journal of hydrogen energy, 2008. 33(21): p. 5905-5910. [CrossRef] [Google Scholar]
  7. A. Jayakumar, S. Pethaiah Sethu, M. Ramos, J. Robertson, A. Al-Jumaily, Ionics, 2015. 21(1): p. 1-18. [CrossRef] [Google Scholar]
  8. J.A. Kumar, P. Kalyani, and R. Saravanan, Int. J. Electrochem. Sci., 3 (2008) 961 - 969. [Google Scholar]
  9. S.S. Pethaiah, et al., Ionics, 2011. 17(4): p. 361-366. [CrossRef] [Google Scholar]
  10. O.T. Holton, and J.W. Stevenson, Platinum Metals Review, 2013. 57(4): p. 259-271. [CrossRef] [Google Scholar]
  11. M. Espinoza, M. Andersson, J. Yuan, B. Sundén, International Journal of Energy Research, 2015. 39(11): p. 1528-1536. [CrossRef] [Google Scholar]
  12. S. Park, J.W. Lee, and B.N. Popov, International Journal of Hydrogen Energy, 2012. 37(7): p. 5850-5865. [CrossRef] [Google Scholar]
  13. M. Mathias, et al., Diffusion media materials and characterisation. Handbook of fuel cells, 2003. [Google Scholar]
  14. D. Gerteisen, T. Heilmann, and C. Ziegler, Journal of Power Sources, 2008. 177(2): p. 348-354. [CrossRef] [Google Scholar]
  15. R. Schweiss, C. Meiser, T. Damjanovic, I. Galbiati, N. Haak, SIGRACET® Gas Diffusion Layers for PEM Fuel Cells, Electrolyzers and Batteries. 2016. [Google Scholar]
  16. H. Tsuchiya and O. Kobayashi, International Journal of Hydrogen Energy, 2004. 29(10): p. 985-990. [CrossRef] [Google Scholar]
  17. A. Hermann, T. Chaudhuri, and P. Spagnol, International journal of hydrogen Energy, 2005. 30(12): p. 1297-1302. [CrossRef] [Google Scholar]
  18. K.S. Lyons, and B.D. Gould. Fuel Cells. in Materials Science Forum. 2017. Trans Tech Publ. [Google Scholar]
  19. D. Brett and N. Brandon, Fuel Cell Review, 2005. 2(1): p. 15-23. [Google Scholar]
  20. X. Li and I. Sabir, International journal of hydrogen energy, 2005. 30(4): p. 359-371. [CrossRef] [Google Scholar]
  21. I.U. Hwang, H.N. Yu, S.S. Kim, D.G. Lee, J.D. Suh, S.H. Lee, B.K. Ahn, S.H. Kim, T.W. Lim, Journal of Power Sources, 2008. 184(1): p. 90-94. [CrossRef] [Google Scholar]
  22. J. Wu, X.Z. Yuan, J.J. Martin, H. Wang, J. Zhang, J. Shen, S. Wu, W. Merida, Journal of Power Sources, 2008. 184(1): p. 104-119. [CrossRef] [Google Scholar]
  23. D. Stevens and J. Dahn, Carbon, 2005. 43(1): p. 179-188. [CrossRef] [Google Scholar]
  24. A. Jayakumar, M. Ramos, and A. Al-Jumaily. International Mechanical Engineering Congress and Exposition. 2016. American Society of Mechanical Engineers. [Google Scholar]
  25. H. Ju, H. Meng, and C.-Y. Wang, International Journal of Heat and Mass Transfer, 2005. 48(7): p. 1303-1315. [CrossRef] [Google Scholar]
  26. Y. Hung, K. El-Khatib, and H. Tawfik, Journal of Power Sources, 2006. 163(1): p. 509-513. [CrossRef] [Google Scholar]
  27. A.S. Woodman, E.B. Anderson, K.D. Jayne, and M.C. Kimble, 1999. AMERICAN ELECTROPLATERS AND SURFACE FINISHERS SOCIETY INC. [Google Scholar]
  28. T. Hottinen, M. Mikkola, T. Mennola, P. Lund Journal of power sources, 2003. 118(1): p. 183-188. [CrossRef] [Google Scholar]
  29. A. Jayakumar, S. Singamneni, M. Ramos, A.M Al-Jumaily, S.S. Pethaiah, Materials, 2017. 10(7): p. 796. [CrossRef] [Google Scholar]
  30. R. Velu and S. Singamneni, Evaluation of the influences of process parameters while selective laser sintering PMMA powders. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015. 229(4): p. 603-613. [CrossRef] [Google Scholar]
  31. K. Alayavalli and D.L. Bourell, Rapid prototyping journal, 2010. 16(4): p. 268-274. [CrossRef] [Google Scholar]
  32. G. Yang, J. Mo, Z. Kang, F.A. List, J.B. Green, S.S. Babu, F.Y. Zhang, International Journal of Hydrogen Energy, 2017. 42(21): p. 14734-14740. [CrossRef] [Google Scholar]
  33. G. Yang, J. Mo, Z. Kang, Y. Dohrmann, F.A. List, J.B. Green, S.S. Babu, F.Y. Zhang, Applied Energy, 2018. 215: p. 202-210. [CrossRef] [Google Scholar]
  34. S. Chen, J. Murphy, J. Herlehy, D.L. Bourell, K. L. Wood, Rapid Prototyping Journal, 2006. 12(5): p. 275-282. [CrossRef] [Google Scholar]
  35. C.J. Netwall, B.D. Gould, J.A Rodgers, N.J Nasello, K.E. Swider-Lyons, Journal of Power Sources, 2013. 227: p. 137-144. [CrossRef] [Google Scholar]
  36. K. Kojima and K. Fukazawa, ECS Transactions, 2015. 69(17): p. 213-219. [CrossRef] [Google Scholar]
  37. S. Chen, D.L. Bourell, and K.L. Wood. International SFF Symposium, Austin, TX, August. 2004. [Google Scholar]
  38. B. Lyons, M. Batalov, P. Mohanty, S. Das, SFF Symposium, Austin, TX. 2005. [Google Scholar]
  39. B.D. Gould, J.A. Rodgers, M. Schuette, K. Bethune, S. Louisa, R. Rocheleau and K. Swider-Lyons, ECS Journal of Solid State Science and Technology, 2015. 4(4): p. P3063-P3068. [CrossRef] [Google Scholar]
  40. Lee, S.-J., C.-H. Huang, and Y.-P. Chen, Journal of materials processing technology, 2003. 140(1): p. 688-693. [CrossRef] [Google Scholar]
  41. G. Scotti, et al., P. Kanninen, T. Kallioand S. Franssila, Journal of Micromechanics and Microengineering, 2012. 22(9): p. 094006. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.