MATEC Web of Conferences

Open Access

Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness 01001

Agung Setyo Darmawan, Bambang Waluyo Febriantoko, Agus Dwi Anggono, Tri Widodo Besar Riyadi and Abdul Hamid

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801001

• Abstract
• PDF (1.832 MB)
• References

Open Access

Air flow Simulation in correlation of the Outside Engine Temperature Change with Variation of the Grill 01002

Rahmat Riza, Paryana Puspaputra and Wajib Haryono

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801002

• Abstract
• PDF (1.924 MB)
• References

Open Access

Performance Study on Solar Hybrid Air-Conditioning System for Residential Water Heating 01003

Kaidir, Mulyanef and Burmawi

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801003

• Abstract
• PDF (1.375 MB)
• References

Open Access

Performance Experimental Study of Solar Still With Reflector To Produce Fresh Water and Salt 01004

Mulyanef, Duskiardi, Kamaruzzaman Sopian, Kaidir and Zulfika Rahman

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801004

• Abstract
• PDF (1.760 MB)
• References

Open Access

Caracterization and Compressive Strength of Biocomposite Hydroxyapatite-Borosilicate with Hight Temperature Sintering 01005

Burmawi, Novesar Jamarun, Syukri Arief and Gunawarman

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801005

• Abstract
• PDF (1.365 MB)
• References

Open Access

Peculiarities of Injection Molding Conducting Composites 01006

Yovial Mahyoedin, Jaafar Sahari, Andanastuti Mukhtar, Norhamidi Mohammad and Iqbal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801006

• Abstract
• PDF (1.817 MB)
• References

Open Access

Effect of graphite sizes and carbon black content on flowability of the injection molded conductive composite material 01007

Yovial Mahyoedin, Jaafar Sahari, Andanastuti Mukhtar, Norhamidi Mohammad and Suryadimal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801007

• Abstract
• PDF (1.856 MB)
• References

Open Access

Experimental Investigation of Vibration Response of a Flexible Coupler In a Four Bar Mechanism Due to Varying Crank Length and Crank Speed 01008

Rizky Arman, Andi Isra Mahyuddin, Wenny Marthiana and Iman Satria

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801008

• Abstract
• PDF (1.808 MB)
• References

Open Access

The in-plane electrical conductivity: the rotation parameters effect on producing graphite/epoxy composites 01009

Hendra Suherman, Andro Hamdani, Edi Septe, Yovial and Irmayani

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801009

• Abstract
• PDF (1.752 MB)
• References

Open Access

Design and Production of Rotary Type Machine for Chop Up Organic Waste Plantation 01010

Wenny Marthiana, Duskiardi, Rizky Arman, Yovial Mahyoedin and Dedi Wardiyanto

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801010

• Abstract
• PDF (1.563 MB)
• References

Open Access

Strain-Stress Formation and Deformation of Molded Materials by Drying-Induced Shrinkage 01011

Yoshinori Itaya

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801011

• Abstract
• PDF (2.324 MB)
• References

Open Access

Extrusion Process of Polypropylene Composites Reinforced Milled Carbon Fibre for Conductive Polymer Composite Application 01012

Nabilah Afiqah Mohd Radzuan, Abu Bakar Sulong and Mahendra Rao Somalu

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824801012

• Abstract
• PDF (1.614 MB)
• References

Open Access

Development of a Web-Based Convergent Hospital Billing System 02001

Adhistya Erna Permanasari, Silmi Fauziati and Argi Kartika Candri

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824802001

• Abstract
• PDF (1.991 MB)
• References

Open Access

Smart Clothline System Based on Internet of Thing (IoT) 02002

Zakiah Mohd Yusoff, Zuraida Muhammad, Amar Faiz Zainal Abidin, KA Nur Dalila, Noor Fadzilah Razali, Masmaria Abdul Majid and KK. Hasan

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824802002

• Abstract
• PDF (1.655 MB)
• References

Open Access

Grid Study of Mini Hydro Power Plant (MHPP) of Palangai Hulu 2x4,9 MW South Pesisir 02003

Hidayat, Cahayahati, Arnita and Saiful Jamaan

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824802003

• Abstract
• PDF (1.561 MB)
• References

Open Access

Study of Capacitor Bank Switching Transient in Distribution Network 02004

Indra Nisja, Mirza Zoni and Arnita

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824802004

• Abstract
• PDF (1.687 MB)
• References

Open Access

Online Position Control Performance Improving Applying Incremental Fuzzy Logic Controller 02005

Dirman Hanafi, Mohamed Najib Ribuan, Wan HamidahWan Abas, Hidayat, Elmy Johana, Herman Wahid, Rozaimi Ghazali and Hisyam Abdul Rahman

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824802005

• Abstract
• PDF (2.154 MB)
• References

Open Access

Analysis of Characteristics Over Current Relay and Ground Fault Relay on Feeder Rayon Tabing 02006

Arzul, Ija Darmana, Erliwati, Adiv Rama Salvayer and Tris Safri Yetno

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824802006

• Abstract
• PDF (1.719 MB)
• References

Open Access

Gender Influence on the Household Electrical Energy Consumption Behavior 03001

Maria Isfus Senjawati, Lusi Susanti, Hilma Raimona Zadry and Prima Fithri

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803001

• Abstract
• PDF (1.600 MB)
• References

Open Access

Intervention Selection to the Awareness of Energy-Saving Behavior in the Public Sector 03002

Rozza Linda, Lusi Susanti and Hilma Raimona Zadry

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803002

• Abstract
• PDF (1.545 MB)
• References

Open Access

Designing Improvement of Procurement Business Process Reengineering Approach : A Study Case of Insurance Company 03003

Almira Rhea Masayu and M. Dachyar

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803003

• Abstract
• PDF (1.378 MB)
• References

Open Access

The Valuation of Geothermal Power Projects in Indonesia Using Real Options Valuation 03004

Reza A. Bilqist, M. Dachyar and Farizal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803004

• Abstract
• PDF (1.635 MB)
• References

Open Access

Determining Criteria of Human Resource Information System that Affect Human Resource Performance in Companies Using DEMATEL-Based ANP Method 03005

Eveline Siregar and M. Dachyar

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803005

• Abstract
• PDF (1.764 MB)
• References

Open Access

Analysis of Outpatient Service Queue of Public Hospital in Jakarta 03006

M. Dachyar, Farizal and M. Mansur Yafi

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803006

• Abstract
• PDF (2.009 MB)
• References

Open Access

Improvement Priorities: Public Hospital Service Quality 03007

M. Dachyar, Farizal and Alicia Ti

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803007

• Abstract
• PDF (1.566 MB)
• References

Open Access

Determining Criteria for Food SME’s Supplier Selection Using DEMATEL-Based ANP Method 03008

Yasmin Ramadhani, M. Dachyar and Farizal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803008

• Abstract
• PDF (1.733 MB)
• References

Open Access

Strategy Design to Improve the Implementation of Supply Chain Management in Food SMEs 03009

Agustina Windaryanti, M. Dachyar and Farizal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803009

• Abstract
• PDF (1.439 MB)
• References

Open Access

Scheduling for Indonesia’s Aircraft Wing Structure Design Project with Critical Path Method and Resource-Constrained Project Scheduling 03010

Melissa Putri Hidayat, M. Dachyar and Farizal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803010

• Abstract
• PDF (1.742 MB)
• References

Open Access

Scheduling of Aircraft Design Project: A Comparison of Critical Path Method, Design Structure Matrix and Genetic Algorithm Approaches 03011

Ariani Amalia, M. Dachyar and Farizal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803011

• Abstract
• PDF (1.518 MB)
• References

Open Access

Scheduling of Empennage Structure Design Project of Indonesia’s Aircraft with Critical Path Method (CPM) 03012

Arin Wulandari, M. Dachyar and Farizal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803012

• Abstract
• PDF (1.597 MB)
• References

Open Access

Implementation of Risk Management in Manufacturing of Wellhead and Christmas Tree Equipment (Risk management framework) 03013

Abdul Hamid, Ishak Bin Baba, Sulaiman Bin Haji Hasan, Agung Setyo Darmawan and Nushatisah

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803013

• Abstract
• PDF (1.746 MB)
• References

Open Access

Product Distribution Optimization in Food SMEs with Integer Linear Programming 03014

Syafira Chika Widiyanti, M. Dachyar and Farizal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803014

• Abstract
• PDF (1.600 MB)
• References

Open Access

Patients’ Loyalty Improvement in Public Hospital 03015

M. Dachyar, Farizal and Ika Prisila Minar

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803015

• Abstract
• PDF (1.645 MB)
• References

Open Access

Optimization of Production Planning Using Goal Programming Approach at Chocolate Factory 03016

Noviyarsi, Lestari Setiawati and Arhamna Arisya

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803016

• Abstract
• PDF (1.627 MB)
• References

Open Access

Quality Improvement of Industrial Products Bungo Mayang to Customer Satisfaction with The Kano Model Approach 03017

Yesmizarti Muchtiar, Dessi Mufti and Vil Yosri

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824803017

• Abstract
• PDF (1.518 MB)
• References

Open Access

Scale Up Production Indonesian Liquid Propolis From Raw Propolis and Wild Beehive Using Bubbling Vacuum Evaporator 04001

Muhamad Sahlan, Andhika Akhmariadi, Diah Kartika Pratami, Heri Hermansyah and Anondho Wijanarko

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824804001

• Abstract
• PDF (1.571 MB)
• References

Open Access

Chitin and Chitosan from Green Shell (Perna Viridis): Utilization Fisheries Wastes from Traditional Market in Jakarta 04002

Flora Elvistia Firdaus, Indah Purnamasari and Pandu Gunatama

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824804002

• Abstract
• PDF (1.819 MB)
• References

Open Access

The Effectiveness Biosorption of Durian (Durio zibhetinus) Rind Pectin on Handling Liquid Waste Containing Heavy Metal (Pb II) 04003

Flora Elvistia Firdaus, Amida Redella and Sintani Nursabila

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824804003

• Abstract
• PDF (2.050 MB)
• References

Open Access

The Production of Bioethanol from Rimau Gerga Lebong (Rgl) Orange Waste as an Alternative Energy 04004

Vike Darliyasi, Kurnia Herlina Dewi and Budiyanto

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824804004

• Abstract
• PDF (1.569 MB)
• References

Open Access

Non-Ionizing Radiation (NIR) Exposure Map Development Using GIS for Gong Badak, Terengganu, Malaysia 05001

S.N. Hazmin, A.R.S.N. Dianah, M.K.A. Kamarudin, R. Umar and H.N. Syafiqah

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805001

• Abstract
• PDF (1.942 MB)
• References

Open Access

The Benefit of Wind Distribution Analysis for Coastal Construction Design in East Java Province 05002

Surya Hermawan, Joko Purnomo and Daniel Tjandra

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805002

• Abstract
• PDF (1.424 MB)
• References

Open Access

E-census Implementation: A Case study in Naikoten II, Kupang, Indonesia 05003

Lily Puspa Dewi, Adi Wibowo and Ngakan M.A. Immanuel

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805003

• Abstract
• PDF (1.495 MB)
• References

Open Access

Understanding the Behavioral Intention to Use a University Web-Portal 05004

Ezra Aditia, I Nengah Tela, Nursyam Saleh, Desi Ilona and Zaitul

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805004

• Abstract
• PDF (1.612 MB)
• References

Open Access

Identification of Implementation Program of Electricity Competency 05005

Ija Darmana, Nizwardi Jalinus, Ganefri and Sukardi

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805005

• Abstract
• PDF (1.412 MB)
• References

Open Access

Antecedents of Intention to Use E-Learning 05006

Khairudin, Susi Herawati, Desi Ilona and Zaitul

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805006

• Abstract
• PDF (1.440 MB)
• References

Open Access

Application of Compound Bonding Based On Augmented Reality 05007

Alexander Setiawan, Silvia Rostianingsih and Timotitus Reinaldo Widodo

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805007

• Abstract
• PDF (1.730 MB)
• References

Open Access

A Novel of Internal Corrosion Assessment Methods on Drinking Water Distribution Pipelines 05008

Edi Septe, Nizwardi Jalinus and Refdinal

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805008

• Abstract
• PDF (1.309 MB)
• References

Open Access

Determinants of web-user satisfaction: using technology acceptance model 05009

Zaitul, Fanny Ramadhani and Desi Ilona

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824805009

• Abstract
• PDF (1.565 MB)
• References