MATEC Web of Conferences

Open Access

Aamks: the platform for assessing fire safety of humans in buildings 00001

Karol Kre´nski and Mateusz Fliszkiewicz

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700001

Open Access

Air quality health indices - review 00002

Anna Gayer, Łukasz Adamkiewicz, Dominika Mucha and Artur Badyda

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700002

Open Access

Analysis of minimum ignition temperature of pellet dust layer and cloud due to adding BC and ABC fire extinguishing powders 00003

Bożena Kukfisz

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700003

Open Access

Analysis of sorption of vehicle liquids with sand that appear after car accidents reproduced in laboratory scale 00004

Andrzej Polanczyk, Małgorzata Ciuka-Witrylak, Oleksandr Synelnikov and Vasil Loik

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700004

Open Access

Analysis of susceptibility of inflammable tobacco products dust to ignition from a heated surface 00005

Marzena Półka

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700005

Open Access

Analysis of susceptibility of peat on its spontaneous heating and self-ignition properties 00006

Marzena Półka

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700006

Open Access

Analysis of the influence of the heating process on the charring depth of wooden elements 00007

Andrzej Marciniak

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700007

Open Access

Analysis of the influence of the spraying angle on the distribution of sprinkling intensity by a selected Turbo water nozzle 00008

Piotr Piątek and Jerzy Gałaj

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700008

Open Access

Analysis of the load-bearing capacity of timber members exposed to fire 00009

Kamil Kmiecik and Tomasz Domański

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700009

Open Access

Analysis of the use for Fire Protection Water Supply Systems in public utility buildings and residential buildings 00010

Joanna Binio and Sylwester Kieliszek

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700010

Open Access

Application of an Integrated Risk Assessment Software to Quantify the Life Safety Risk in Building during a Fire 00011

Adam Krasuski and Mariusz Pecio

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700011

Open Access

Applications for mobile devices informing about threats 00012

Norbert Tuśnio

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700012

Open Access

Assessment of extinguishing efficiency of hybrid system using water mist and inert gas during class A fires 00013

Jerzy Gałaj and Tomasz Drzymała

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700013

Open Access

Best practices for selection and application of firefighting foam 00014

Joanna Rakowska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700014

Open Access

Checking the compatibility of embedded concrete for the production of prefabricated freight scales with the parameters declared by the supplier 00015

Aleksandra Powęzka, Mateusz Banaś and Paweł Ogrodnik

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700015

Open Access

Children exposure to PM_2.5 in kindergarten classrooms equipped with air purifiers - a pilot study 00016

Anna Gayer, Dominika Mucha, Łukasz Adamkiewicz and Artur Badyda

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700016

Open Access

Classification of a burnt area based on spectral images 00017

Anna Szajewska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700017

Open Access

Comparison of Risk Categorization Methods in a Multisimulation Framework 00018

Adam Krasuski and Łukasz Kuziora

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700018

Open Access

Conceptual model of portfolio management project for territories protection against flooding 00019

Yuriy Starodub and Andrii Havrys

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700019

Open Access

Determination of fire parameters in a passenger car fire test using thermovision 00020

Janusz Rybiński and Anna Szajewska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700020

Open Access

Determination of training conditions of fire-fighters in mobile training complexes 00021

Vasyl Lusch, Vasyl Loik, Oleksandr Lazarenko and Mirosław Kosiorek

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700021

Open Access

Determining the causes of failure of the distillation column for the esterification of n-butanol with acetic acid 00022

Sławomir Parzych and Marek Gucwa

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700022

Open Access

Effects of interfering gases in electrochemical sensors NH₃ and NO₂ 00023

Małgorzata Majder-Łopatka

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700023

Open Access

Efficiency of sorbents used to restore the grip of the surface of the oily road 00024

Mirosław Sobolewski, Dominika Gancarczyk and Piotr Książek

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700024

Open Access

Environmental hazard of Novoyavorivsk municipal landfill 00025

Vasyl Popovych, Kateryna Stepova and Oleksandr Prydatko

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700025

Open Access

Evacuation of people to a medium-high public buildings 00026

Marcin Cisek, Kamil Ciszewski and Robert Piec

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700026

Open Access

Experimental studies on changes in mechanical properties of polymer composites under impact of thermal load determined based on compression testing 00027

Agata Walczak, Ireneusz Naworol, Daniel Pieniak, Kamil Pasierbiewicz and Grzegorz Dzień

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700027

Open Access

Feasibility study on the use of fast camera and recording in time-domain to characterize ESD 00028

Szymon Ptak, Albert Smalcerz and Piotr Ostrowski

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700028

Open Access

Flammability parameters of sprayed and foam aerosols selected for studies 00029

Bozena Kukfisz

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700029

Open Access

Geoinformational system of rescue services 00030

Sergiy Yemelyanenko, Yuriy Rudyk, Andriy Kuzyk and Roman Yakovchuk

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700030

Open Access

Geopolymer foam as a passive fire protection 00031

Michał Łach, Dariusz Mierzwiński, Kinga Korniejenko and Janusz Mikuła

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700031

Open Access

Hazards associated with municipal waste storage. Vol. I 00032

Anna Dmochowska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700032

Open Access

Hazards associated with municipal waste storage Vol. II 00033

Anna Dmochowska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700033

Open Access

Health hazards from polycyclic aromatic hydrocarbons bound to submicrometer particles in Gliwice (Poland) 00034

Barbara Kozielska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700034

Open Access

Identification of firefighting system configuration of rural settlements 00035

Anatoliy Tryhuba, Roman Ratushny, Oleg Bashynsky and Olexandr Shcherbachenko

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700035

Open Access

Increased effectiveness of firefighting during internal fires with the use of positive pressure attack 00036

Marcin Łapicz, Radosław Makowski and Jarosław Jędrzejas

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700036

Open Access

Industry 4.0 and explosion prevention 00037

Marek Woliński

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700037

Open Access

Influence of post weld heat treatment for weld joint of P355GH 00038

Sławomir Parzych and Rafał Dziurka

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700038

Open Access

Inhalation exposure to particulate matter in a work environment of firefighters 00039

Joanna Rakowska, Karolina Kuskowska and Wioletta Rogula-Kozłowska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700039

Open Access

Mathematical modeling of thermal fire effect on tanks with oil products 00040

Mykhailo Semerak, Sergii Pozdeev, Roman Yakovchuk, Olga Nekora and Oleksandr Sviatkevych

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700040

Open Access

Modeling of the process of the extinguishing gas concentration changes in the protected compartment 00041

Przemysław Kubica and Sylwia Boroń

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700041

Open Access

Numerical analysis on Smoke and Heat Control System and Sprinkler System in covered car parks 00042

Mateusz Fliszkiewicz and Karol Kreński

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700042

Open Access

Numerical representation of extinguishing gas discharge process 00043

Sylwia Boroń and Tomasz Wdowiak

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700043

Open Access

Numerical simulation of dispersion of ammonia in industry space using the ANSYS 00044

Zdzisław Salamonowicz

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700044

Open Access

Project of forming «culture and safety» of the airport 00045

Andriy Ivanusa

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700045

Open Access

Proportioning accuracy of foam concentrate testing in periodic control of foam fixed extinguishing systems 00046

Mirosław Sobolewski, Bernard Król, Jakub Jakubiec and Dominika Gancarczyk

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700046

Open Access

Seasonal variation in health exposure to PM-bound Polycyclic Aromatic Hydrocarbons in selected sport facility 00047

Karolina Kuskowska and Wioletta Rogula-Kozłowska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700047

Open Access

Simulation process of the heat transfer in multilayered structures 00048

Yuriy Starodub, Roman Veselivskyy and Oleksandr Vasylenko

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700048

Open Access

Statistical analysis of State Fire Service intervention during chemical, radiation and biological hazards 00049

Rafał Matuszkiewicz

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700049

Open Access

Study of water curtain effectiveness to fight against vapours of methyl acetate during uncontrolled release 00050

Tomasz Węsierski, Małgorzata Majder-Łopatka and Wiktor Wąsik

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700050

Open Access

Technogenic magnetic particles of topsoil from different sources of emission - A case study from upper silesian conurbation, Poland 00051

Maria Magdalena Szuszkiewicz, Adam Łukasik, Tadeusz Magiera and Marcin Szuszkiewicz

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700051

Open Access

Tensile strength analysis of aramid fabric of firefighter’s clothing after accelerated aging and abrasion 00052

Renata Kamocka-Bronisz

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700052

Open Access

The application of CFD software in the explosive hazardous area classification 00053

Andrzej Krauze

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700053

Open Access

The behaviour of alkali activated materials based on calcium clay at elevated temperatures 00054

Michał Łach, Dariusz Mierzwiński, Kinga Korniejenko, Artur Stanek and Janusz Mikuła

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700054

Open Access

The determination of basic fire-fighters rescue operations of key practical importance 00055

Wojciech Jarosz, Przemysław Kowalczyk and Andrzej Marciniak

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700055

Open Access

The effect of selected inhibitors on the characteristics of wood dust explosion 00056

Łukasz Zubek and Mirosław Sobolewski

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700056

Open Access

The effectiveness of selected decontamination techniques in the process of decontamination of chemical protection suits used by chemical rescue units in Fire Service 00057

Zdzisław Salamonowicz, Rafał Matuszkiewicz, Małgorzata Ciuka-Witrylak, Dariusz Baranowski, Jacek Chrzęstek and Stanisław Biedugnis

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700057

Open Access

The impact of fog nozzle type on the distribution of mass spray density 00058

Wiktor Wąsik, Agata Walczak and Tomasz Węsierski

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700058

Open Access

The influence of the fire source location on the load-bearing capacity of timber beam exposed to fire 00059

Kamil Kmiecik

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700059

Open Access

The use of a cone calorimeter for the preliminary determination of the extinguishing efficiency of bulk materials 00060

Bernard Król, Marek Konecki, Mariusz Klakus and Barbara Ościłowska

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700060

Open Access

The use of multisimulation in determining fire hazards in buildings covered by expertise 00061

Przemysław Kubica and Tomasz Wdowiak

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700061

Open Access

The use of polycyclic aromatic hydrocarbons molecular diagnostic ratios as a source identification tool - case study 00062

Katarzyna Janoszka, Justyna Klyta, Łukasz Laks and Krzysztof Słaby

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700062

Open Access

The usefulness of Gram staining method for analysis of the effectiveness of decontamination of firefighter’s protective outfit 00063

Andrzej Polanczyk

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700063

Open Access

Wetting properties of aqueous short-chain alcohols’ solutions 00064

Andrzej Mizerski

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700064

Open Access

Work-related factors and depressive symptoms in firefighters - preliminary data 00065

Magdalena Konopko, Wojciech Jarosz, Przemysław Bienkowski and Halina Sienkiewicz-Jarosz

Published online: 10 December 2018

DOI: https://doi.org/10.1051/matecconf/201824700065

MATEC Web of Conferences

Volume 247 (2018)

Fire and Environmental Safety Engineering 2018 (FESE 2018)

Statement of Peer review

About the conference

Aamks: the platform for assessing fire safety of humans in buildings 00001

Air quality health indices - review 00002

Analysis of minimum ignition temperature of pellet dust layer and cloud due to adding BC and ABC fire extinguishing powders 00003

Analysis of sorption of vehicle liquids with sand that appear after car accidents reproduced in laboratory scale 00004

Analysis of susceptibility of inflammable tobacco products dust to ignition from a heated surface 00005

Analysis of susceptibility of peat on its spontaneous heating and self-ignition properties 00006

Analysis of the influence of the heating process on the charring depth of wooden elements 00007

Analysis of the influence of the spraying angle on the distribution of sprinkling intensity by a selected Turbo water nozzle 00008

Analysis of the load-bearing capacity of timber members exposed to fire 00009

Analysis of the use for Fire Protection Water Supply Systems in public utility buildings and residential buildings 00010

Application of an Integrated Risk Assessment Software to Quantify the Life Safety Risk in Building during a Fire 00011

Applications for mobile devices informing about threats 00012

Assessment of extinguishing efficiency of hybrid system using water mist and inert gas during class A fires 00013

Best practices for selection and application of firefighting foam 00014

Checking the compatibility of embedded concrete for the production of prefabricated freight scales with the parameters declared by the supplier 00015

Children exposure to PM2.5 in kindergarten classrooms equipped with air purifiers - a pilot study 00016

Classification of a burnt area based on spectral images 00017

Comparison of Risk Categorization Methods in a Multisimulation Framework 00018

Conceptual model of portfolio management project for territories protection against flooding 00019

Determination of fire parameters in a passenger car fire test using thermovision 00020

Determination of training conditions of fire-fighters in mobile training complexes 00021

Determining the causes of failure of the distillation column for the esterification of n-butanol with acetic acid 00022

Effects of interfering gases in electrochemical sensors NH3 and NO2 00023

Efficiency of sorbents used to restore the grip of the surface of the oily road 00024

Environmental hazard of Novoyavorivsk municipal landfill 00025

Evacuation of people to a medium-high public buildings 00026

Experimental studies on changes in mechanical properties of polymer composites under impact of thermal load determined based on compression testing 00027

Feasibility study on the use of fast camera and recording in time-domain to characterize ESD 00028

Flammability parameters of sprayed and foam aerosols selected for studies 00029

Geoinformational system of rescue services 00030

Geopolymer foam as a passive fire protection 00031

Hazards associated with municipal waste storage. Vol. I 00032

Hazards associated with municipal waste storage Vol. II 00033

Health hazards from polycyclic aromatic hydrocarbons bound to submicrometer particles in Gliwice (Poland) 00034

Identification of firefighting system configuration of rural settlements 00035

Increased effectiveness of firefighting during internal fires with the use of positive pressure attack 00036

Industry 4.0 and explosion prevention 00037

Influence of post weld heat treatment for weld joint of P355GH 00038

Inhalation exposure to particulate matter in a work environment of firefighters 00039

Mathematical modeling of thermal fire effect on tanks with oil products 00040

Modeling of the process of the extinguishing gas concentration changes in the protected compartment 00041

Numerical analysis on Smoke and Heat Control System and Sprinkler System in covered car parks 00042

Numerical representation of extinguishing gas discharge process 00043

Numerical simulation of dispersion of ammonia in industry space using the ANSYS 00044

Project of forming «culture and safety» of the airport 00045

Proportioning accuracy of foam concentrate testing in periodic control of foam fixed extinguishing systems 00046

Seasonal variation in health exposure to PM-bound Polycyclic Aromatic Hydrocarbons in selected sport facility 00047

Simulation process of the heat transfer in multilayered structures 00048

Statistical analysis of State Fire Service intervention during chemical, radiation and biological hazards 00049

Study of water curtain effectiveness to fight against vapours of methyl acetate during uncontrolled release 00050

Technogenic magnetic particles of topsoil from different sources of emission - A case study from upper silesian conurbation, Poland 00051

Tensile strength analysis of aramid fabric of firefighter’s clothing after accelerated aging and abrasion 00052

The application of CFD software in the explosive hazardous area classification 00053

The behaviour of alkali activated materials based on calcium clay at elevated temperatures 00054

The determination of basic fire-fighters rescue operations of key practical importance 00055

The effect of selected inhibitors on the characteristics of wood dust explosion 00056

The effectiveness of selected decontamination techniques in the process of decontamination of chemical protection suits used by chemical rescue units in Fire Service 00057

The impact of fog nozzle type on the distribution of mass spray density 00058

The influence of the fire source location on the load-bearing capacity of timber beam exposed to fire 00059

The use of a cone calorimeter for the preliminary determination of the extinguishing efficiency of bulk materials 00060

The use of multisimulation in determining fire hazards in buildings covered by expertise 00061

The use of polycyclic aromatic hydrocarbons molecular diagnostic ratios as a source identification tool - case study 00062

The usefulness of Gram staining method for analysis of the effectiveness of decontamination of firefighter’s protective outfit 00063

Wetting properties of aqueous short-chain alcohols’ solutions 00064

Work-related factors and depressive symptoms in firefighters - preliminary data 00065

Children exposure to PM_2.5 in kindergarten classrooms equipped with air purifiers - a pilot study 00016

Effects of interfering gases in electrochemical sensors NH₃ and NO₂ 00023