| Issue |
MATEC Web Conf.
Volume 248, 2018
4th Engineering Science and Technology International Conference (ESTIC 2018)
|
|
|---|---|---|
| Article Number | 01009 | |
| Number of page(s) | 5 | |
| Section | Mechanical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201824801009 | |
| Published online | 10 December 2018 | |
The in-plane electrical conductivity: the rotation parameters effect on producing graphite/epoxy composites
1 Department of Mechanical Engineering, Universitas Bung Hatta, 25143 Padang, Indonesia
2 Department of Industrial Engineering, Universitas Ekasakti, 25133 Padang, Indonesia
* Corresponding author: hendras@bunghatta.ac.id
The rotation parameters used to produce graphite/ epoxy composites material is greatly determine the properties of in-plane electrical conductivity. However, the appropriate rotation parameters are different for each composition, conductive materials, and matrix used. In this study, variations of rotation parameters (250 rpm, 350 rpm and 450 rpm) and rotation time (5 min, 10 min and 15 min) with constant molding parameter such as molding temperature (150 0C), molding time (120 minutes) and molding pressure (50 kg / cm2) have been used to produce graphite/epoxy composites. The results showed that the highest in-plane electrical conductivity 65 S/cm on the resulting graphite/epoxy composites.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.