MATEC Web of Conferences

Open Access

Preface 00001

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134900001

• Abstract
• PDF (939.4 KB)

Open Access

Simulation Study of the Damage Mechanisms Appearing in a Cross Ply Composite Material Loaded in Uniaxial Tension 01001

Eleftherios Tsivolas, Leonidas N. Gergidis and Alkiviadis S. Paipetis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901001

• Abstract
• PDF (2.091 MB)
• References

Open Access

Α numerical evaluation of various damage models for thermoplastic composite materials subjected to quasi-static tensile loading 01002

Ioannis Sioutis and Konstantinos Tserpes

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901002

• Abstract
• PDF (2.104 MB)
• References

Open Access

Impact of structural uncertainties on the buckling strength of cylindrical GLARE panels subjected to uniform compression 01003

Costas Kalfountzos, George Bikakis and Efstathios Theotokoglou

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901003

• Abstract
• PDF (759.3 KB)
• References

Open Access

Buckling of simply supported GLARE cylindrical panels subjected to uniform compression 01004

Costas Kalfountzos, George Bikakis and Efstathios Theotokoglou

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901004

• Abstract
• PDF (312.7 KB)
• References

Open Access

The crack quasi-static growth and analysis of interlaminar crack resistance of layered composite 01005

Igor Pavelko and Vitalijs Pavelko

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901005

• Abstract
• PDF (428.7 KB)
• References

Open Access

Effect of Impact Modifiers on Strength and Fracture Toughness of CFRPs 01006

Dionisis Semitekolos, Ioannis G. Asimakopoulos, Dimitrios A. Dragatogiannis and Costas A. Charitidis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901006

• Abstract
• PDF (573.8 KB)
• References

Open Access

Investigation on the interfacial properties of CNTs sized carbon fibres in epoxy resin using push-out method via nano-indentation technique 01007

Zhenxue Zhang, Xiaoying Li, Hanshan Dong, Simon Jestin, Stefania Termine, Aikaterini-Flora Trompeta, Andreia Araújo, Raquel M. Santos and Costas Charitidis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901007

• Abstract
• PDF (2.736 MB)
• References

Open Access

Experimental investigation on flexural properties of FDM-processed PET-G specimen using response surface methodology 01008

Nikolaos A. Fountas, Ioannis Papantoniou, John D. Kechagias, Dimitrios E. Manolakos and Nikolaos M. Vaxevanidis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901008

• Abstract
• PDF (2.437 MB)
• References

Open Access

Characterization in expected working environments of recyclable fire-resistant materials 01009

Giulia De Aloysio, Mattia Morganti, Luca Laghi, Matteo Scafè, Enrico Leoni, Claudio Mingazzini and Stefano Bassi

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901009

• Abstract
• PDF (414.0 KB)
• References

Open Access

Development of recyclable Fibre Metal Laminates (FML), their mechanical characterization and FE modelling, aiming at structural application in aeronautics 01010

Stefano Bassi, Matteo Scafe, Enrico Leoni, Claudio Mingazzini, Narayan Jatinder Bhatia and Andrea Rossi

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901010

• Abstract
• PDF (3.029 MB)
• References

Open Access

Design of a bonnet of a sport vehicle realized with an innovative recyclable Polymeric Matrix Composite and virtual characterization of the related sandwich structure 01011

M. Basso, C. Mingazzini, M. Scafè, E. Leoni, E. Benco, R. Garcia-Etxabe, K. Gondra and D. Pullini

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901011

• Abstract
• PDF (1.209 MB)
• References

Open Access

Bioinspired cementitious-polymer composite for increased energy absorption 01012

T. Trevor Painter, Emily Schwab, Nicole MacCrate, Alexander S. Brand and Eric Jacques

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901012

• Abstract
• PDF (2.595 MB)
• References

Open Access

Numerical evaluations of strain field modification induced by production flaws in loaded composite structures 01013

Jan Raška, Jarmil Vlach and Jan Horňas

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134901013

• Abstract
• PDF (278.5 KB)
• References

Open Access

Discussion of hardening effects on phase field models for fracture 02001

Aris Tsakmakis and Michael Vormwald

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902001

• Abstract
• PDF (594.3 KB)
• References

Open Access

Examination of Fracture Mechanisms in two Al – Ti – V – Cr – (Si) High Entropy Alloys 02002

Spyridon Chaskis, Dimitrios Kiousis, Pavlos Stavroulakis, Russell Goodall and Spyros Papaefthymiou

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902002

• Abstract
• PDF (2.519 MB)
• References

Open Access

Microstructural Characterization of AlCrTiV – Si High Entropy Alloy for advanced applications 02003

Ioannis Daskalopoulos, Spyridon Chaskis, Marianthi Bouzouni, Pavlos Stavroulakis, Russell Goodall and Spyros Papaefthymiou

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902003

• Abstract
• PDF (1.445 MB)
• References

Open Access

Comparative Study of Microstructural Evolution and Mechanical Properties of Inconel^® 718 and Waspaloy^® Welds 02004

Angelos Kaldellis, Anastasia Alexandratou, Anastasios Kladis, Stavros Deligiannis, Petros Tsakiridis and George Fourlaris

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902004

• Abstract
• PDF (1.742 MB)
• References

Open Access

Hardness behavior of W. Nr. 1.7709 steel, oil quenched and tempered between 475°C and 575°C 02005

John Mantzoukas, Dimitris G. Papageorgiou, Carmen Medrea and Constantinos Stergiou

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902005

• Abstract
• PDF (1.572 MB)
• References

Open Access

Investigation of hardness behavior after carburizing and hardening of 15CrNi6 steel 02006

Arsenis Dragatsis, Leonidas Fragkos-Livanios, Dimitris G. Papageorgiou and Carmen Medrea

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902006

• Abstract
• PDF (2.096 MB)
• References

Open Access

Alumina-Forming Austenitic (AFA) steels and aluminium-based coating on 15-15 Ti steel to limit mechanical damage in presence of liquid lead-bismuth eutectic and liquid lead 02007

Ingrid Proriol Serre, Ines Ponsot and Jean-Bernard Vogt

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902007

• Abstract
• PDF (2.078 MB)
• References

Open Access

Characterization and performance of high strength steel 51CrV4 under cyclic loading 02008

Michail Malikoutsakis, Ioannis Makris, Aggelos Pagonas and Georgios Savaidis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902008

• Abstract
• PDF (575.7 KB)
• References

Open Access

Fatigue behaviour of Plasma Sprayed Titania and Chromia Coatings 02009

Angelos Koutsomichalis, Antonios Lontos, George Loukas, Michalis Vardavoulias and Nikolaos Vaxevanidis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902009

• Abstract
• PDF (3.382 MB)
• References

Open Access

Influence of discontinuities on fatigue strength using the example of additively manufactured specimens made of AlSi10Mg 02010

Heinz Thomas Beier, Patrick Yadegari and Michael Vormwald

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902010

• Abstract
• PDF (1.795 MB)
• References

Open Access

Numerical modeling of the low cycle fatigue: effect of manufacturing imperfections caused by machining process 02011

Ikram Abarkan, Abdellatif Khamlichi and Rabee Shamass

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902011

• Abstract
• PDF (2.185 MB)
• References

Open Access

Numerical and experimental study for AM50 magnesium alloy under dynamic loads 02012

Iulian-Ionuț Ailinei, Sergiu-Valentin Galațanu, Cosmin Ioan Onea and Liviu Marșavina

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902012

• Abstract
• PDF (1.054 MB)
• References

Open Access

The influence of exposed to corrosion length of rebars on fatigue life of RC elements 02013

Konstantinos Koulouris, Maria Basdeki and Charis Apostolopoulos

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902013

• Abstract
• PDF (2.120 MB)
• References

Open Access

Effect of the Small Punch Test sample geometry on the Liquid Metal Embrittlement of Cu-30 wt% Zn by the eGaIn 02014

Marco Ezequiel and Ingrid Proriol Serre

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902014

• Abstract
• PDF (2.226 MB)
• References

Open Access

Effect of Fly Ash on the Electrochemical Performance of 316L Stainless Steel Concrete Reinforcement in Saline Environments Attacked by Acid Rain 02015

Sofia Tsouli, Angeliki G. Lekatou, Pantelis Goutzos and Spyridon Kleftakis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902015

• Abstract
• PDF (2.083 MB)
• References

Open Access

Mechanical behavior of steel reinforcement before and after flame spray coating in marine environment 02016

Maria Basdeki, Konstantinos Koulouris and Charis Apostolopoulos

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902016

• Abstract
• PDF (2.029 MB)
• References

Open Access

Organic dyes as corrosion inhibitors of commercial AA1050 aluminum alloy in sodium chloride environment 02017

Paraskevi Pantazopoulou, Stamatina Theohari and Sofia Kalogeropoulou

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902017

• Abstract
• PDF (3.080 MB)
• References

Open Access

A customized electrical potential difference method for in situ monitoring of propagating cracks using a stochastic algorithm 02018

Evangelos Skrinis, Christos Kalligeros, Antonios Tsolakis and Vasilios Spitas

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902018

• Abstract
• PDF (536.2 KB)
• References

Open Access

Fatigue strength evaluation of a 13%Cr supermartensitic stainless steel by the thermographic method 02019

Sérgio S.M. Tavares, Bruna Abib, Paulo Kenedi, Odivaldo C. Alves and Brígida B. Almeida

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902019

• Abstract
• PDF (2.244 MB)
• References

Open Access

Temper embrittlement of 9%Ni low carbon steel and nondestructive inspection by magnetic Barkhausen noise 02020

Sérgio S.M. Tavares, Fernanda F. Neves, Hugo R. da Igreja, Leosdan F. Noris, Odivaldo C. Alves and Juan Manuel Pardal

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902020

• Abstract
• PDF (2.695 MB)
• References

Open Access

A Review of Computer Vision Techniques in the Detection of Metal Failures 02021

Deborah Fitzgerald and Roselita Fragoudakis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134902021

• Abstract
• PDF (735.2 KB)
• References

Open Access

Putting Stiffness where it’s needed: Optimizing the Mechanical Response of Multi-Material Structures 03001

Arouna Patouossa Mounchili, Stefan Bosse, Dirk Lehmhus and Adrian Struss

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903001

• Abstract
• PDF (2.578 MB)
• References

Open Access

On the phenomenon of impact 03002

Stephan Kalapis, Athanasios Dafnis and Kai-Uwe Schröder

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903002

• Abstract
• PDF (218.6 KB)
• References

Open Access

Optimal Designs of Tilting-Pad Thrust Bearing operation with the combination of numerical and machine learning techniques 03003

Konstantinos P. Katsaros and Pantelis G. Nikolakopoulos

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903003

• Abstract
• PDF (275.7 KB)
• References

Open Access

Design approach for the development of a digital twin of a generic hybrid lightweight structure 03004

Tobias Ryll, Moritz Kuhtz, Lukas Quirin, Minh Nguyen, Maik Gude and Angelos Filippatos

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903004

• Abstract
• PDF (1.080 MB)
• References

Open Access

Helical UAV – an 'Aerial Screw' inspired conceptual design for a passively cooled UAV 03005

Mim Kabir and Emmanouil Bouzakis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903005

• Abstract
• PDF (597.6 KB)
• References

Open Access

Designing a knowledge management system for Naval Materials Failures 03006

Nikolaos Melanitis, George Giannakopoulos, Konstantinos Stamatakis, Dionysios Mouzakis and Aggelos Koutsomichalis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903006

• Abstract
• PDF (1.843 MB)
• References

Open Access

Probabilistic strength assessment through analytical modelling of pillars found in ship structures 03007

Angelos S. Vasileiou and Konstantinos N. Anyfantis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903007

• Abstract
• PDF (483.0 KB)
• References

Open Access

Internal pressure driven finite element model of a single pulmonary acinus 03008

James Campbell, Salman Siddiqui, Simon Gill and Alkiviadis Tsamis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903008

• Abstract
• PDF (2.002 MB)
• References

Open Access

Reliability design of mechanical systems subjected to repetitive stresses 03009

Seong-woo Woo, Dennis L. O’Neal and Yimer Mohammed Hassen

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903009

• Abstract
• PDF (1.264 MB)
• References

Open Access

Structural health monitoring through surface acoustic wave inspection deployed on capillaries embedded in additively manufactured components 03010

Michaël Hinderdael, Zoé Jardon, Julien Ertveldt and Patrick Guillaume

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903010

• Abstract
• PDF (1.886 MB)
• References

Open Access

A Health Monitoring Modelling Case Study: Humidity Effects on Engine Deterioration Prediction 03011

Asteris Apostolidis and Konstantinos P. Stamoulis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903011

• Abstract
• PDF (1.956 MB)
• References

Open Access

Model-Based Structural Health Monitoring of Box Girders 03012

Nicholas E. Silionis and Konstantinos N. Anyfantis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903012

• Abstract
• PDF (980.6 KB)
• References

Open Access

Integration and evaluation of a meander-shaped fibre-optical sensor in a GFRP leaf spring 03013

Andreas Janetzko-Preisler, Friedrich Wolf-Monheim, Rainer Souschek, Dominik Kaiser, Ralph Wojtczyk, Athanasios Dafnis, Kai-Uwe Schröder, Wolfgang David and Paul Zandbergen

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903013

• Abstract
• PDF (1.806 MB)
• References

Open Access

Crack recognition automation in concrete bridges using Deep Convolutional Neural Networks 03014

Hajar Zoubir, Mustapha Rguig and Mohammed Elaroussi

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903014

• Abstract
• PDF (2.427 MB)
• References

Open Access

Automated detection-classification of defects on photo-voltaic modules assisted by thermal drone inspection 03015

Arsenios Gurras, Leonidas Gergidis, Christos Mytafides, Lazaros Tzounis and Alkiviadis S. Paipetis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903015

• Abstract
• PDF (954.4 KB)
• References

Open Access

Non-destructive Inspection of Composite Aileron during Fatigue Test 03016

Michal Podstawka, Vladimír Snop, Petr Bělský and Kristýna Kutiová

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134903016

• Abstract
• PDF (3.304 MB)
• References

Open Access

Damage and failure evaluation of diamond wire for multi-wire sawing of hard stone blocks through modelling and numerical simulation 04001

Daniel Gomes, Andreia Araujo, Rui Marques, José Patricio, Vítor Lopez and Raquel M. Santos

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904001

• Abstract
• PDF (2.145 MB)
• References

Open Access

Investigation of penetrator defect formation during high frequency induction welding in pipeline steels 04002

Christos Sofras, Marianthi Bouzouni, Nikolaos Voudouris and Spyros Papaefthymiou

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904002

• Abstract
• PDF (2.074 MB)
• References

Open Access

Influence of the material volume of a lattice structure on bending properties 04003

Katarina Monkova, Peter Pavol Monka, Oldřich Šuba, Milan Žaludek, Dražan Kozak and Jan Vanca

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904003

• Abstract
• PDF (2.110 MB)
• References

Open Access

Autofrettage of component-like ultra high Strength Steel Specimens with intersecting Holes 04004

Carl Fällgren, Thomas Beier, Michael Vormwald and Andreas Kleemann

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904004

• Abstract
• PDF (2.625 MB)
• References

Open Access

Estimation of fatigue life for clinched joints with the Local Strain Approach incorporating the impact of cold forming to cyclic material properties 04005

Boris Spak, Maximilian Schlicht, Karina Nowak, Markus Kästner, Pascal Froitzheim, Wilko Flügge and Melanie Fiedler

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904005

• Abstract
• PDF (533.7 KB)
• References

Open Access

The effect of diesel knock on a turbocharged diesel engine emissions and top compression ring friction 04006

Anastasios Zavos, Pantelis G. Nikolakopoulos, Apostolos Pesyridis and Alasdair Cairns

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904006

• Abstract
• PDF (2.039 MB)
• References

Open Access

On the effects of heat and surface treatment on the fatigue performance of high-strength leaf springs 04007

Michail Malikoutsakis, Christos Gakias, Ioannis Makris, Peter Kinzel, Eckehard Müller, Maria Pappa, Nikolaos Michailidis and Georgios Savaidis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904007

• Abstract
• PDF (1.928 MB)
• References

Open Access

Approximation of elastic-plastic local strains in surface-hardened notched components 04008

Patrick Yadegari, Teresa Schlitzer and Michael Vormwald

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904008

• Abstract
• PDF (1.960 MB)
• References

Open Access

Fatigue behaviour of a spring: a case study 04009

Nuno Graça and Paulo M. S. T. de Castro

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904009

• Abstract
• PDF (2.092 MB)
• References

Open Access

Cavitation shapes measurements in piston-ring lubrication and their link to lubricant properties 04010

Polychronis Dellis

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904010

• Abstract
• PDF (1.806 MB)
• References

Open Access

Verification and application of bird strike analysis for the design of high-speed helicopter composite cowlings 04011

Radek Doubrava, Martin Oberthor, Petr Bělský and Bohuslav Cabrnoch

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904011

• Abstract
• PDF (2.364 MB)
• References

Open Access

Experimental-numerical validation of the curing reaction of snap-cure polymer systems for component families of small batch sizes and high diversity 04012

Rafal Stanik, Sirko Geller, Michael Müller, Tomasz Stanik, Andreas Gruhl, Alexander Knorr, Henrik Antonowitz, Albert Langkamp and Maik Gude

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904012

• Abstract
• PDF (544.9 KB)
• References

Open Access

Repair of local damages to precast prestressed slab elements at a parking garage 04013

Marta Lutomirska, Tomasz Lutomirski and Artur Sakowski

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904013

• Abstract
• PDF (3.699 MB)
• References

Open Access

Assessment and rehabilitation of a deteriorated heat pipeline overpass 04014

Marta Lutomirska and Tomasz Lutomirski

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904014

• Abstract
• PDF (2.202 MB)
• References

Open Access

Practical Experience with the Methodology of Prediction of Corrosion-Fatigue Failures of Steam Turbine Rotating Blades 04015

Josef Kasl, Jan Lazar and Miroslava Matějová

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904015

• Abstract
• PDF (999.0 KB)
• References

Open Access

Development of a multipurpose test rig and validation of an innovative rotorcraft vertical tail - TAILTEST 04016

Vaclav Horak

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904016

• Abstract
• PDF (2.044 MB)
• References

Open Access

Development of a multipurpose test rig - TAILTEST 04017

Martin Oberthor, Václav Horák and Roman Růžek

Published online: 15 November 2021

DOI: https://doi.org/10.1051/matecconf/202134904017

• Abstract
• PDF (2.299 MB)
• References