MATEC Web of Conferences

Open Access

Influence of the binder technological shrinkage on the strength of composite reinforcement 00001

Vladimir Barsukov, Alla Volik and Sviatlana Sazon

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000001

• Abstract
• PDF (922.2 KB)
• References

Open Access

Effective low-noise technologies for the production of pile works in construction 00002

Vladimir Chernyuk, Sergey Semenyuk and Vitaly Yuskovich

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000002

• Abstract
• PDF (484.1 KB)
• References

Open Access

Calculation model of the anisotropy of strength at compression of masonry 00003

Valery Derkach and Anton Galalyuk

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000003

• Abstract
• PDF (732.7 KB)
• References

Open Access

Some issues of calculation of complex rod and plate systems on an elastic base 00004

Oksana Kozunova

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000004

• Abstract
• PDF (1.133 MB)
• References

Open Access

Nonlinear analysis of a crossing-beams system on an elastic with usage of the Mathematica software 00005

Oksana Kozunova and Kristina Sirosh

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000005

• Abstract
• PDF (954.2 KB)
• References

Open Access

Shear resistance of prestressed concrete beams with the constant and variable height 00006

Pavel Krivitskiy, Nikifor Matweenko, Vasilij Malinovskiy and Elizabeth Matweenko

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000006

• Abstract
• PDF (944.1 KB)
• References

Open Access

Electrical conductivity of cement mortar with the addition of graphene 00007

Tatiana Potses, Vladimir Novikov, Kirill Sergeev and Sergey Leonovich

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000007

• Abstract
• PDF (796.7 KB)
• References

Open Access

The compressive strength of steel fibre reinforced concrete obtained by testing cubes and cylinders 00008

Alena Sadouskaya, Syarhei Leanovich, Neli Budrevich and Elena Polonina

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000008

• Abstract
• PDF (856.6 KB)
• References

Open Access

The correction of foam glass composition based on its principal parameters 00009

Dmitry Safonchik and Svetlana Maksimovich

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000009

• Abstract
• PDF (699.0 KB)
• References

Open Access

The modified early age strains development model for the case of two-way restraint conditions 00010

Volha Sannikava and Viktar Tur

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000010

• Abstract
• PDF (913.8 KB)
• References

Open Access

Estimation of the pull-off resistance models of reinforced concrete structures by a numerical method 00011

Mikalai Shalabyta, Elizabeth Matweenko, Nikifor Matweenko and Valery Rakhuba

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000011

• Abstract
• PDF (941.6 KB)
• References

Open Access

Reconstruction of the suspended pedestrian bridge through the River Bug to border island 00012

Mikalai Shalabyta, Andrei Shuryn, Dmitry Kurlapov and Viacheslav Dragan

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000012

• Abstract
• PDF (1.243 MB)
• References

Open Access

Research of the echo-impulse method of control of drilled pieces (non-destructive control) 00013

Dmitry Snezhkov and Neli Budrevich

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000013

• Abstract
• PDF (970.3 KB)
• References

Open Access

Cold-formed Steel Framing of a Dairy Products Warehouse in Brest, Belarus 00014

Vasili Stsepaniuk, Andrei Shuryn, Dmitry Zhdanov and Pavel Tsikhanchuk

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000014

• Abstract
• PDF (980.6 KB)
• References

Open Access

Assessment of the existing reinforced concrete structures with usage of the fuzzy logic – based expert system 00015

Viktar Tur and Yuliya Dardziuk

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000015

• Abstract
• PDF (1.018 MB)
• References

Open Access

Modelling of the shear resistance of self-stressed beams reinforced with FRP applying the Critical Shear Crack Theory 00016

Viktar Tur and Aliaksandr Varabei

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000016

• Abstract
• PDF (1.835 MB)
• References

Open Access

The continuation method for calculation of continuous beams of arbitrary bending rigidity 00017

Andrei Verameichyk, Mikhael Mazyrka and Vitaliy Khvisevich

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000017

• Abstract
• PDF (693.7 KB)
• References

Open Access

Investigation of causes of XCMG QY25К lorry-mounted crane accident 00018

Andrei Verameichyk, Andrei Zheltkovich, Michael Lugovskoy, Vitaly Khvisevich and Boris Holodar

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000018

• Abstract
• PDF (1.343 MB)
• References

Open Access

Strengthening of tensile zone of the reinforced concrete beams with composite fabrics 00019

Alla Volik and Yan Novitski

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000019

• Abstract
• PDF (788.7 KB)
• References

Open Access

Experimental investigation results of composite RC beams under cyclic loading 00020

Igor Voskoboynikov

Published online: 02 December 2021

DOI: https://doi.org/10.1051/matecconf/202135000020

• Abstract
• PDF (1.068 MB)
• References