Open Access
Issue
MATEC Web Conf.
Volume 349, 2021
6th International Conference of Engineering Against Failure (ICEAF-VI 2021)
Article Number 03010
Number of page(s) 8
Section Components and Structural Elements in Engineering Applications: Design, Detections of Defects, Structural Health Monitoring
DOI https://doi.org/10.1051/matecconf/202134903010
Published online 15 November 2021
  1. J. A. Cooper, R. A. Crosbie, R. J. Dewhurst, A. D. W. McKie, S. B. Palmer, IEEE Trans Ultrason Ferroelectr Freq Contro, Vol. UFFC-33, No.5, p. 462-470, (1996) [Google Scholar]
  2. A. Tarasenko, R. Ctvrtlik, R. Kudelka, Sci. Rep., 11, 2845, (2021) [Google Scholar]
  3. M. Abbas, M. Shafiee, Structural health monitoring (shm) and determination of surface defects in large metallic structures using ultrasonic guided waves, Sensors (Basel), 18, 3958, p. 1-26, (2018) [Google Scholar]
  4. P. Wilcox, M. Lowe, P. Cawley, The effect of dispersion on long-range inspection using ultrasonic guided waves,NDT E Int, 34, p. 1-9, (2001) [CrossRef] [Google Scholar]
  5. B. Zima, M. Rucka, Guided waves for monitoring of plate structures with linear cracks of variable length. Arch. Civ. Mech. Eng. 16, p. 387-396, (2016) [CrossRef] [Google Scholar]
  6. J. L. Rose, Ultrasonic Guided Waves in Solid Media, 1st ed., Cambrdige University Press: New York, NY, USA, (2014) ISBN: 978-1-107-04895-9 [CrossRef] [Google Scholar]
  7. P. Rizzo, J. G. Han, X. L. Ni, Structural health monitoring of immersed structures by means of guided ultrasonic waves. J. Intell. Mater. Syst. Struct. 21, p. 3769-3775, (2010) [Google Scholar]
  8. M. Hinderdael, Z. Jardon, M. Lison, D. De Baere, W. Devesse, M. Strantza, P. Guillaume, Proof of concept of integrated load measurement in 3D printed structures, Sensors (Basel), 17, 2, 328, p. 1-12 [Google Scholar]
  9. M. Hinderdael, M. Moonens, J. Ertveldt, D. De Baere, P. Guillaume, Analytical Modeling of Embedded Load Sensing Using Liquid-filled Capillaries Integrated by Metal Additive Manufacturing, IEEE Sens. J., 19, 20, p. 9447-9455, (2019) [Google Scholar]
  10. D. De Baere, M. Strantza, M. Hinderdael, W. Devesse, P. Guillaume, Effective Structural Health Monitoring with Additive Manufacturing, Proceedings Of 7th European Workshop on Structural Health Monitoring, p. 2314-2321 (2014) [Google Scholar]
  11. M. Strantza, D. De Baere, M. Rombouts, S. Clijsters, I. Vandendael, H. Terryn, P. Guillaume, D. Van Hemelrijck, 3D Printing for Intelligent Metallic Structures, Proceedings Of 7th European Workshop on Structural Health Monitoring, p. 2251-2257, (2014) [Google Scholar]
  12. M. F. Hinderdael, D. De Baere, P. Guillaume, Fatigue performance of powder bed fused Ti-6Al-4V component with integrated chemically etched capillary for structural health monitoring application, Proceedings of the 18th International Conference on Experimental Mechanics, 2, 8, 499, p. 1-5, (2018) [Google Scholar]
  13. M. Strantza, D. De Baere, M. Rombouts, G. Maes, P. Guillaume, D. Van Hemelrijck, Feasibility study on structural health monitoring system produced by metal three-dimensional printing, Struct. Health Monit., 14, 6, (2015) [Google Scholar]
  14. M. Strantza, R. Vafadari, D. De Baere, M. Rombouts, I. Vandendael, H. Terryn, M. Hinderdael, A. Rezaei, W. Van Paepeghem, P. Guillaume, D. Van Hemelrijck, Evaluation of different topologies of integrated capillaries in effective structural health monitoring system produced by 3D printing, Proceedings of 10th International Workshop on Structural Health Monitoring, 1, p. 153-160 (2015) [Google Scholar]
  15. M. Strantza, M. Hinderdael, D. De Baere, I. Vandendael, H. Terryn, D. Van Hemelrijck, P. Guillaume, Additive Manufacturing for novel structural health monitoring systems, proceedings of the 8th European Workshop on Structural Health Monitoring, 367, p. 1-9 (2016) [Google Scholar]
  16. M. Hinderdael, M. Strantza, D. De Baere, W. Devesse, I. De Graeve, H. Terryn, P. Guillaume, Fatigue performance of Ti-6Al-4V additively manufactured specimens with integrated capillaries of an embedded structural health monitoring system, Materials, 10, 9, (2017) [Google Scholar]
  17. M. F. Hinderdael, D. De Baere, P. Guillaume, Proof of concept of Crack Localization Using Negative Pressure Waves in Closed Tubes for Later Application in Effective SHM system for Additive Manufactured Components, Appl. Sci., 6, 33, p. 1-12, (2016) [Google Scholar]
  18. M. Hinderdael, Z. Jardon, P. Guillaume, An analytical model for negative pressure waves in gaseous media, Mech Syst Signal Process, 144, 106800, (2020) [Google Scholar]
  19. Z. Jardon, M. Hinderdael, T. Regert, J. Van Beeck, P. Guillaume, On the nature of Pressure Wave Propagation through Ducts for Structural Health Monitoring Application, Appl. Sci., 9, 5, 837, p. 1-15, (2019) [CrossRef] [Google Scholar]
  20. B. De Pauw, M. Hinderdael, M. Moonens, D. De Baere, T. Geernaert, F. Berghmans, P. Guillaume, Fatigue failure monitoring of 316L stainless coupons using optical fibre based distributed strain sensing, Smart Mater Struct., 28, 10, (2019) [Google Scholar]
  21. Catalogus Olympus [Google Scholar]
  22. A. D. W. McKie, J. W. Wagner, J. B. Spicer, J. B. Deaton, Dual-beam interferometer for the accurate determination of surface-wave velocity. Applied Optics, 30, 28, pp. 4034-4039, (1991) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.