Open Access
MATEC Web Conf.
Volume 349, 2021
6th International Conference of Engineering Against Failure (ICEAF-VI 2021)
Article Number 02013
Number of page(s) 9
Section Metallic Materials: Characterization, Mechanical Behavior and Modeling, Detection of Metal Failures
Published online 15 November 2021
  1. Fernandez I, Bairán JM, Marí AR. Mechanical model to evaluate steel reinforcement corrosion effects on σ–ε and fatigue curves. Experimental calibration and validation. Engineering Structures. 2016; 118:320-333 [CrossRef] [Google Scholar]
  2. Tahershamsi M, Fernandez I, Lundgren K, Zandi K. Investigating correlations between crack width, corrosion level and anchorage capacity. Structure and Infrastructure Engineering. 2017; 13(10):1294-1307. DOI: 10.1080/15732479.2016.1263673 [CrossRef] [Google Scholar]
  3. Zhang W, Song X, Gu X, Li S. Tensile and fatigue behavior of corroded rebars. Construction and Building Materials. 2012; 34:409-417 [CrossRef] [Google Scholar]
  4. Sun X, Kong H, Wang H, Zhang Z. Evaluation of corrosion characteristics and corrosion effects on the mechanical properties of reinforcing steel bars based on three-dimensional scanning. Corrosion Science. 2018; 142:284-294 [CrossRef] [Google Scholar]
  5. Andisheh K, Scott A, Palermo A, Clucas D. Influence of chloride corrosion on the effective mechanical properties of steel reinforcement. Structure and Infrastructure Engineering. 2019; 15(8):1036-1048 [CrossRef] [Google Scholar]
  6. Sheng, G.M.; Gong, S.H. Investigation of low cycle fatigue behavior of building structural steels under earthquake loading. Acta Metall. Sin. Engl. Lett. 1997, 10, 51–55. [Google Scholar]
  7. Hawileh, R.A.; Abdalla, J.A.; Oudah, F.; Abdelrahman, K. Low-cycle fatigue life behaviour of BS 460B and BS B500B steel reinforcing bars. Fatigue Fract. Eng. Mater. Struct. 2010, 33, 397–407. [CrossRef] [Google Scholar]
  8. Apostolopoulos, C.A.; Rodopoulos, C.A. Inelastic cyclic behavior of as-received and pre-corroded S500s Tempcore steel reinforcement. Int. J. Struct. Integr. 2010, 1, 52–62. [CrossRef] [Google Scholar]
  9. Kashani, M.; Barmi, A.K.; Malinova, V.S. Influence of inelastic buckling on low-cycle fatigue degradation of reinforcing bars. Constr. Build. Mater. 2015, 94, 644–655. [CrossRef] [Google Scholar]
  10. Kashani, M.M.; Lowes, L.N.; Crewe, A.J.; Alexander, N.A. Finite element investigation of the influence of corrosion pattern on inelastic buckling and cyclic response of corroded reinforcing bars. Eng. Struct. 2014, 75, 113–125. [CrossRef] [Google Scholar]
  11. Meda, A.; Mostosi, S.; Rinaldi, Z.; Riva, P. Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns. Eng. Struct. 2014, 76, 112–123. [CrossRef] [Google Scholar]
  12. Dolley, E.J.; Lee, B.; Wei, R.P. The effect of pitting corrosion on fatigue life. Fatigue Fract. Eng. Mater. Struct. 2000, 23, 555–560. [CrossRef] [Google Scholar]
  13. Veerman, R.; van Breugel, K.; Koenders, E. Effect of Corrosion on the Fatigue Service-Life on Steel and Reinforced Concrete Beam. In Proceedings of the fib Symposium, Copenhagen, Denmark, 18–20 May 2015. [Google Scholar]
  14. Yi, W.; Kunnath, S.K.; Sun, X.; Shi, C.; Tang, F. Fatigue Behavior of Reinforced Concrete Beams with Corroded Steel Reinforcement. ACI Struct. J. 2011, 107, 526–533. [Google Scholar]
  15. Apostolopoulos, C.A.; Konstantopoulos, G.; Koulouris, K. Seismic resistance prediction of corroded S400 (BSt420) reinforcing bars. Int. J. Struct. Integr. 2018, 9, 119–138. [CrossRef] [Google Scholar]
  16. Afsar E., Kashani M.M., ‘Exploring the impact of chloride-induced corrosion on seismic damage limit states and residual capacity of RC structures’, Structure and Infrastructure Engineering 14 (6) (2017) 714-729 [Google Scholar]
  17. Li, X., Liang, Y.-S., Zhao, Z.-H., & Ly, H.-L., ‘Low-cycle fatigue behavior of corroded and CFRP-wrapped reinforced concrete columns’, Construction and Building Materials, 101 (2015) 902-917 [CrossRef] [Google Scholar]
  18. Vasco, Marina Cardoso, Panagiota V. Polydoropoulou, Apostolos Chamos and Sp.G. Pantelakis. “Effect of corrosion and sandblasting on the high cycle fatigue behavior of reinforcing B500C steel bars.” Fracture and Structural Integrity 11 (2017): 9-22. [Google Scholar]
  19. Apostolopoulos C., Papadopoulos M., ‘Tensile and low cycle fatigue behaviour of corroded reinforcing steel bars S400ʹ, Constr Build Mater. 21 (4) (2007) 855–64. [CrossRef] [Google Scholar]
  20. BSI (British Standards Institution). Concrete. Part 1: Specification, Performance, Production and Conformity; EN 206-1; BSI: London, UK, 2000 [Google Scholar]
  21. Apostolopoulos, C.A.; Drakakaki, A.; Basdeki, M. Seismic assessment of a reinforced concrete column under seismic loads. Int. J. Struct. Integr. 2019, 10, 41–54. [CrossRef] [Google Scholar]
  22. ASTM International. ASTM G1-03, Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens; ASTM International: West Conshohocken, PA, USA, 2017 [Google Scholar]
  23. Especificação LNEC Varões de aço. A400 NR de Ductilidade Especial Para Armaduras de Betão Armado Características, Ensaios e Marcação; AO, LNEC E 455-2010. 2010. [Google Scholar]
  24. UNE. Norma Espanola Experimental Barras Corrugadas de Acero Soldable con Caracteristıcas Especiales de Ductilidad para Armaduras de Horigon Armado; UNE 36065 EX 2000; UNE: Madrid, Spain, 2000 [Google Scholar]
  25. CEN—European Comittee for Standardization. EN 1998-1:2005, Eurocode 8: Design of Structures for Earthquake Resistance—Part 1: General Rules, Seismic Actions and Rules for Buildings; CEN—European Comittee for Standardization: Brussels, Belgium, 2005. [Google Scholar]
  26. Apostolopoulos, C.A.; Koulouris, K.; Basdeki, M. Damage Parameters of Rebars in Marine Environment and Fatigue Life. In Proceedings of the International Conference on Sustainable Materials, Systems and Structures (SMSS 2019), Rovinj, Croatia, 20–22 March 2019. [Google Scholar]
  27. Drakakaki, A.; Apostolopoulos, C.A. The size effect of rebars on the structural integrity of reinforced concrete structures, which are exposed to corrosive environments. MATEC Web Conf. 2018, 188, 03009. [CrossRef] [EDP Sciences] [Google Scholar]
  28. Kunnath, S.K., Kanvinde, A., Xiao, Y. and Zhang, G. (2009), “Effects of buckling and low cycle fatigue on seismic performance of reinforcing bars and mechanical couplers for critical structural members”, Technical Report CA/UCD SESM-09-01, California Department of Transportation, Sacramento, CA. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.