Open Access
| Issue |
MATEC Web Conf.
Volume 349, 2021
6th International Conference of Engineering Against Failure (ICEAF-VI 2021)
|
|
|---|---|---|
| Article Number | 01013 | |
| Number of page(s) | 5 | |
| Section | Composite Materials: Characterization, Mechanical Behavior and Modeling, Multifunctionality, Advanced Manufacturing Techniques | |
| DOI | https://doi.org/10.1051/matecconf/202134901013 | |
| Published online | 15 November 2021 | |
- M. Kadlec, V. Kafka, Strain Concentration during the compression of a Carbon/Epoxy Composite after impact. International Journal of Structural Integrity, 6(2), pp. 279-289. (2015) [SJR 0.48] [CrossRef] [Google Scholar]
- R. Růžek, M. Kadlec, K. Tserpes, E. Karachalios, Monitoring of compressive behaviour of stiffened composite panels using embedded fibre optic and strain gauge sensors, International Journal of Structural Integrity, 8(1), pp. 134-150. (2017) DOI:10.1108/IJSI-11-2015-0052 [CrossRef] [Google Scholar]
- A. H. Baluch, O. Falcó, J. L. Jiménez, B. H. A. Tijs, C. S. Lopes, An efficient numerical approach to the prediction of laminate tolerance to Barelly Visible Impact Damage, In Composite Structures, (2019), DOI:10.1016/j.compstruct.2019.111017 [Google Scholar]
- R. Sachse, A.K. Pickett, P. Middendorf, Simulation of impact and residual strength of thick laminate composites, In Composites Part B, 195 (2020), 108070 Kadlec, M. – Hron, R. – Guadagno, L.: Mechanical Properties of a Carbon Fabric–Reinforced Epoxy Composite with Carbon Nanotubes and a Flame Retardant. International Journal of Structural Integrity, Vol. 7 Iss: 5, pp.630 – 644. http://dx.doi.org/10.1108/IJSI-09-2015-00292020.108070 [CrossRef] [Google Scholar]
- D. Kreculj, B. Rašau, Review of Impact Damages Modelling in Laminates Composit Aircraft Structures, In Tehnički vjesnik 20, 3(2013), pp.485-495, ICCN 1330-3651 [Google Scholar]
- A. Sellitto, S. Saputo, F. Di Caprio, A. Riccio, A. Russo, V. Acanfora, Numerical–Experimental Correlation of Impact-Induced Damages in CFRP Laminates, In Applied Sciences, 9 (2019), DOI:10.3390/app9112372 [Google Scholar]
- J. Šedek, R. Hron, M. Kadlec, Bond Joint Analysis of Thermoplastic Composite Made from Stacked Tailored Blanks. Applied Mechanics and Materials, 827(2016), pp. 161-168, ISBN-13: 978-3-03835-531-1 [CrossRef] [Google Scholar]
- J. Šedek, R. Hron, M. Kadlec, Evaluation of a bond joint in the carbon weave reinforced thermoplast manufactured by stacked tailored blanks, In Padevět P. and Bittnar P. (ed.), EAN 2015, 53rd Conference on Experimental Stress Analysis, 2015, Český Krumlov, Czech Republic [Google Scholar]
- R. Růžek, K. Tserpes, E. Karachalios, Compression after impact behaviour of CFRP stiffened panels. International Journal of Structural Integrity, 2015, Vol. 6, Iss. 2., pp. 176–193, http://dx.doi.org/10.1108/IJSI-06-2014-0030, ISSN: 1757-9864 [SJR 0.48]. [CrossRef] [Google Scholar]
- M. Kadlec, R. Hron, L. Guadagno, Mechanical Properties of a Carbon Fabric–Reinforced Epoxy Composite with Carbon Nanotubes and a Flame Retardant. International Journal of Structural Integrity, Vol. 7 Iss: 5, pp.630 – 644. http://dx.doi.org/10.1108/IJSI-09-2015-0029 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.