Open Access
| Issue |
MATEC Web Conf.
Volume 349, 2021
6th International Conference of Engineering Against Failure (ICEAF-VI 2021)
|
|
|---|---|---|
| Article Number | 04003 | |
| Number of page(s) | 6 | |
| Section | Mechanical Characterization and Numerical Analysis of Components and Structural Elements | |
| DOI | https://doi.org/10.1051/matecconf/202134904003 | |
| Published online | 15 November 2021 | |
- L. P. Lefebvre, J. Banhart, D. C. Dunand, Porous metals and metallic foams: current status and recent developments, Adv Eng Mat, 10, 9 (2008) [Google Scholar]
- M. Montemurro, G. Bertolino,; T. Roine, A general multi-scale topology optimisation method for lightweight lattice structures obtained through additive manufacturing technology, Composite structures, 258 (2021) [Google Scholar]
- G. Pantazopoulos, A. Vazdirvanidis, Fractographic and Metallographic Study of Spalling Failure of Steel Straightener Rolls, J of fail anal and prev, 8, 6 (2008) [Google Scholar]
- Liu PS. Introduction to porous materials. Beijing: Tsinghua University Press (2004) [Google Scholar]
- B. J. Yang, Z. P. Xi, H. P. Tang, Q. B. Wang, Research progress in preparation and application of gradient-porous metal, Powder Met Indus, 18, 2 (2008) [Google Scholar]
- A. G. Mamalis, et al. Fabrication of multi-layered steel/superconductive ceramic (Y Ba K Cu O)/silver rods by explosive powder compaction and extrusion, Journal of Materials Processing Technology, 57, 1-2 (1996) [CrossRef] [Google Scholar]
- Cosma, C.; Drstvensek, I.; Berce, P. et al. Physical-Mechanical Characteristics and Microstructure of Ti6Al7Nb Lattice Structures Manufactured by Selective Laser Melting, Materials, 13, 18 (2020) [Google Scholar]
- V. Utyaganova, A. Filippov, S. Tarasov, et al. Characterization of AA7075/AA5356 gradient transition zone in an electron beam wire-feed additive manufactured sample Materials characterization, 172 (2021) [Google Scholar]
- M. Pollak, M. Torokova, M. Kocisko, Utilization of Generative Design Tools in Designing Components Necessary for 3D Printing Done by a Robot, TEM Journal-technology education management informatics, 9, 3 (2020) [Google Scholar]
- D. Bourell, J. Pierre, M. Leu, G. Levy, D. Rosen, A. M. Beese, A. Clare, Materials for additive manufacturing. CIRP Ann. Manuf. Technol, 66 (2017) [Google Scholar]
- K. Monkova, et al. A Bending Test of the Additively Produced Porous Sample, 5th Int. Conf. on the I4.0 Model for Adv. Man. Lecture Notes in Mech. Eng. (2020) [Google Scholar]
- M. Mulle, R. Zitoune, et al., Embedded FBGs and 3-D DIC for the stress analysis of a structural specimen subjected to bending, Composite Structures, 91, 1, (2009) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.