EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 349 (2021) MATEC Web Conf., 349 (2021) 02016 References
Open Access
Issue
MATEC Web Conf.
Volume 349, 2021
6th International Conference of Engineering Against Failure (ICEAF-VI 2021)
Article Number 02016
Number of page(s) 8
Section Metallic Materials: Characterization, Mechanical Behavior and Modeling, Detection of Metal Failures
DOI https://doi.org/10.1051/matecconf/202134902016
Published online 15 November 2021
  1. Hou, B.; Li, X.; Ma, X.; Du, C.; Zhang, D.; Zheng, M.; Xu, W.; Lu, D.; Ma, F. The cost of corrosion in China. Mater. Degrad. 2017, 1, 1–10. [CrossRef] [Google Scholar]
  2. Koch, G.; Varney, J.; Thompson, N.; Moghissi, O.; Gould, M.; Payer, J. International Measures of Prevention, Application, and Economics of Corrosion Technologies Study; NACE International: Houston, TX, USA, 2016. [Google Scholar]
  3. Marcus, P. Pour un monde durable: Journée mondiale de la corrosion, 24 April 2020. Matér. Tech. 2020, 108, N1. [Google Scholar]
  4. Darwin, D.; Kahrs, J.T.; Locke, C.E., Jr. Evaluation of Corrosion Resistance of Type 304 Stainless Steel Clad Reinforcing Bars; SM Report No. 65; The University of Kansas Center for Research, Inc.: Lawrence, KS, USA, 2001; 76p. 11. [Google Scholar]
  5. Apostolopoulos, C.A. The influence of Corrosion and Cross- Section Diameter on the Mechanical Properties of B500c Steel. J. Mater. Eng. Perform. 2008, 18, 190–195. [Google Scholar]
  6. Apostolopoulos, C.A. Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigue. Constr. Build. Mater. 2007, 21, 1447–1456. [CrossRef] [Google Scholar]
  7. Salvatore, W.; Caprili, S.; Braconi, A.; Finetto, M.; Bianco, L.; Ascanio, C.; Moersch, J.; Apostolopoulos, C.A.; Ferreira Pimenta, G. Effects of Corrosion on Low-Cycle Fatigue (Seismic) Behaviour of High-Strength Steel Reinforcing Bars (RUSTEEL)—RFSR-CT2009-00023—Technical Steel Research Series EUR 26687; European Commission—Directorate General for Research: Brussels, Belgium, 2014. [Google Scholar]
  8. Andisheh, K.; Scott, A.; Palermo, A.; Clucas, D. Influence of chloride corrosion on the effective mechanical properties of steel reinforcement. Struct. Infrastruct. Eng. 2019, 15, 1036–1048. [CrossRef] [Google Scholar]
  9. Meda, A.; Mostosi, S.; Rinaldi, Z.; Riva, P. Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns. Eng. Struct. 2014, 76, 112–123. [CrossRef] [Google Scholar]
  10. Rajput, A.S.; Sharma, U.K. Corroded reinforced concrete columns under simulated seismic loading. Eng. Struct. 2018, 171, 453–463. [CrossRef] [Google Scholar]
  11. Apostolopoulos, C.A.; Drakakaki, A.; Basdeki, M. Seismic assessment of a reinforced concrete column under seismic loads. Int. J. Struct. Integr. 2019, 10, 41–54. [CrossRef] [Google Scholar]
  12. Guo, A.X.; Li, H.T.; Ba, X.; Guan, X.C.; Li, H. Experimental investigation on the cyclic performance of reinforced concrete piers with chloride-induced corrosion in marine environment. Eng. Struct. 2015, 105, 1–11. [CrossRef] [Google Scholar]
  13. Angst, U.M.; Elsener, B. The size effect in corrosion greatly influences the predicted life span of concrete infrastructures. Sci. Adv. 2017, 3, e1700751. [CrossRef] [Google Scholar]
  14. Kumar, R.; & Kumar, S. Thermal spray coating: a study. international journal of engineering sciences & research technology, 7(3),610-617, 2018 [Google Scholar]
  15. Diamantogiannis, G.; Apostolopoulos, Ch. Alk. and Nikolakopoulos, P.G. Mechanical Behavior of B500c Steel with an Aluminum Layer Coating in a Marine Environment, Journal of Materials in Civil Engineering, 27, 4 [Google Scholar]
  16. Gulec et al, Accelerated corrosion behaviors of Zn, Al and Zn/15Al coatings on a steel surface, MTAEC9, 45 (5), pg. 477-482 (2011) [Google Scholar]
  17. Bobzin et al, Designing the corrosion products of ZnAl15: a new approach to smart corrosion protection coatings [Google Scholar]
  18. Büteführ, M. (2007), Zinc-Aluminium-Coatings as Corrosion Protection for Steel. Materials and Corrosion, 58: 721-726. https://doi.org/10.1002/maco.200704058 [CrossRef] [Google Scholar]
  19. ASTM. (1997). Standard practice for operating slat spray (fog) apparatus. B117, West Conshohocken, PA. [Google Scholar]
  20. ASTM International. ASTM G1-03, Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens; ASTM International: West Conshohocken, PA, USA, 2017. [Google Scholar]
  21. ISO. ISO 15630-1:2010, Steel for the Reinforcement and Prestressing of Concrete—Test Methods—Part 1: Reinforcing Bars, Wire Rod and Wire; ISO: Geneva, Switzerland, 2010. [Google Scholar]
  22. Drakakaki, A.; Apostolopoulos, C. A.; Koulouris, K. Mechanical Characteristics of dual-phase steel B500c after shot peening process, Third International Conference on Advances in Civil, Structural and Construction Engineering - CSCE 2015, 10-11 December 2015, Rome, Italy [Google Scholar]
  23. Drakakaki, A.; Apostolopoulos, C. A.; Katsaounis, A.; Bjorn, H. Corrosion resistance and mechanical characteristics of dual-phase steel B500c, after shot blasting processes, International Journal of Structural Integrity 8 (5), 544-564, 2017 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.