Open Access
| Issue |
MATEC Web Conf.
Volume 349, 2021
6th International Conference of Engineering Against Failure (ICEAF-VI 2021)
|
|
|---|---|---|
| Article Number | 02012 | |
| Number of page(s) | 8 | |
| Section | Metallic Materials: Characterization, Mechanical Behavior and Modeling, Detection of Metal Failures | |
| DOI | https://doi.org/10.1051/matecconf/202134902012 | |
| Published online | 15 November 2021 | |
- S. Annamalai, S. Periyakgoundar, S. Gunasekaran, Magnesium alloys: a review of applications, Materials and technology 53(6), 881–890, (2019) [Google Scholar]
- F. M. Mazzolani, Competing issues for aluminium alloys in structural engineering, Progress in Structural Engineering and Materials 6 (4):185– 196, (October 2014) [Google Scholar]
- M. Easton, A. Beer, M. Barnett, C. Davies, G. Dunlop, Y. Durandet, S. Blacket, T. Hilditch, P. Beggs, Magnesium Alloy Applications in Automotive Structures, Sustainable Automotive Technologies, 60(11), (January 2012) [Google Scholar]
- D. Dvorsky, J. Kubasek, E. Jablonska, J. Lipov, D. Vojtech, High strength AM50 magnesium alloy as a material for possible stent application in medicine, Materials Technology, 34(14),838-842 (2019) [CrossRef] [Google Scholar]
- M.K. Kulekci, Magnesium and its alloys applications in the automotive industry. The International Journal of Advanced Manufacturing Technology, 39(9-10), 851-865, (2008). [CrossRef] [Google Scholar]
- W. A. Monteiro, Special issues on magnesium alloys. InTech, (2011). [CrossRef] [Google Scholar]
- R.M. Wang, A. Eliezer, E.M. Gutman, An investigation on the microstructure of an AM50 magnesium alloy, Materials Science and Engineering: A, 355(1-2), 201-207, (2003) [CrossRef] [Google Scholar]
- K. Neh, M. Ullmann, R. Kawalla, Effect of grain refining additives on microstructure and mechanical properties of the commercial available magnesium alloys AZ31 and AM50, Materials Today: Proceedings 2S S219–S224, (2015) [CrossRef] [Google Scholar]
- S. Dai, F. Wang, D. Ma, Z. Wang, Z. Liu, P. Mao, Enhanced strengthening by progressive two-step solution and ageing treatment in AM50−4%(Zn, Y) magnesium alloy, Trans. Nonferrous Met. Soc. China 28 2419−2426, (2018) [Google Scholar]
- S.V. Galatanu, M. Scano, D. Pietras, L.D. Pirvulescu, M.C. Porcu, L. Marsavina, Bending behaviour of AM50 Magnesium alloy under static and dynamic loading, Procedia Structural Integrity 26 269–276 (2020) [CrossRef] [Google Scholar]
- L. Marsavina, F. Iacoviello, L.D. Pirvulescu, V. di Cocco, L. Rusu, Engineering prediction of fatigue strength for AM50 magnesium alloys, International Journal of Fatigue 127 10-15 (2019) [CrossRef] [Google Scholar]
- M. A. M. Daud, N. Z. Nasir, A. Rivai, M. Z. Selamat, Dynamic Fracture Toughness of Magnesium Alloy under Impact Loading Conditions, Procedia Engineering 53 639–644, (2013) [CrossRef] [Google Scholar]
- D. A. Serban, L. Marsavina, L. Rusu, R. Negru, Numerical study of the behaviour of magnesium alloy AM50 in tensile and torsional loadings, Arch Appl Mech 89: 911–917, (2019) [CrossRef] [Google Scholar]
- O. J. Hallquist, LS-Dyna Theoretical Manual, (1998). [Google Scholar]
- T. Most, J. Will, Sensitivity analysis using the Metamodel of Optimal Prognosis, in Weimar Optimization and Stochastic Days 8.0, Weimar, (2011) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.