Open Access
Issue
MATEC Web Conf.
Volume 344, 2021
International Scientific and Practical Conference “Modern Problems and Directions of Development of Metal Science and Heat Treatment of Metals and Alloys, Dedicated to the Memory of Academician A. A. Baykov” (MPM 2021)
Article Number 01006
Number of page(s) 8
DOI https://doi.org/10.1051/matecconf/202134401006
Published online 01 October 2021
  1. V. Gadalov, I. Vornacheva, S. Voinash, V. Ignatenko, E. Remshev, The influence of thermocyclic treatment on the structure and mechanical properties of pseudo-alpha titanium alloys for steam turbine blades, Mat. Sc. Forum. Switzerland, рр. 117-124 (2021). [CrossRef] [Google Scholar]
  2. V. Rezinskikh, A. Lebedeva, A. Bogachev, Serviceability Criteria for CorrosionDamaged LPC Blades of Steam Turbines, Electric stations 7, рр. 32-35 (1991). [Google Scholar]
  3. W. Wei-Ze, X. Fu-Zhen, Z. Kui-Long, Shan-Tung Tu, Failure analysis of the final stage blade in steam turbine, Eng. Fail. Analysis, 437, рр. 70–74 (2007). [Google Scholar]
  4. L. Zhuchenko, V. Kortenko, Yu. Sakhnin, On restoration of the resource of rotor blades and disks of steam turbines, Electric stations, 5 рр.21-24 (2001). [Google Scholar]
  5. V.I. Pokhmurskii, V.A. Vynar, C.B. Vasyliv, N.B Ratska, Effects of hydrogen exposure on the mechanical and tribological properties of α-titanium surfaces, Wear, 306, рр.47-50 (2013). [CrossRef] [Google Scholar]
  6. Yu. Belolipetskiy, R. Zaletaeva, L. Ostrovsky, Titanium alloys for steam turbine blades, Therm. Eng., 8, рр. 25-29 (1971). [Google Scholar]
  7. F. Gonserovsky, V. Silevich, Extension of the service life of units and parts of the flow path of the turbines of TPP and NPP, Heavy Eng., 10, рр.59-63 (2002). [Google Scholar]
  8. A. Karev, F. Khromchenko, P. Dolzhansky, Development and implementation of a highly efficient technology for the repair of steam turbine rotor blades Electric stations, 12, рр.16-20 (1999). [Google Scholar]
  9. I. Podchernyaeva, A. Verkhoturov, V. Panashenko, Electrospark and complex hardening of titanium surface, Sc. notes of the Komsomolsk-on-Amur St. Tech. Un., 1, рр.73-87 (2014). [Google Scholar]
  10. A. Hasсalik, U. Çaydaş, Electrical discharge machining of titanium alloy (Ti–6Al–4V), App. Surf. Sc., 253 22, рр. 9007–9016 (2007). [CrossRef] [Google Scholar]
  11. L. Wang, Q. Zhang, X. Li, X. Cui, S. Wang, Severe-to-mild wear transition of titanium alloys as a function of temperature, Tr. Let., 53 3, рр. 511-520 (2014). [CrossRef] [Google Scholar]
  12. X. Cui, Y. Mao, M. Wei, S. Wang, Wear characteristics of Ti-6Al-4V alloy at 20– 400°C, Tr. Trans., 55 2, рр.185-190 (2012). [CrossRef] [Google Scholar]
  13. V. Gadalov, A. Filonovich, V. Shkatov, O. Turaeva, I. Vornacheva, A. Rozin, Description of the electrospark alloying process (Generalized model), News S.-W. St. Un. S.: Eng. and tech., 4 21, рр.58-66 (2016). [Google Scholar]
  14. V. Gadalov, S. Emel’yanov, I. Vornacheva, A. Filonovich, S. Safonov, Electroacoustic coating application to improve the performance of composites based on heat-resistant nickel alloys, Rus. Eng. Res., 37 9, рр.751-753 (2017). [CrossRef] [Google Scholar]
  15. V. Gadalov, E. Filatov, A. Gvozdev, N. Starikov, I. Makarova, I. Vornacheva, Investigation of the kinetics of the formation of a hardened surface layer, its structure and phase composition on a sintered alloy OT4, obtained by the method of electroerosive dispersion with local electrospark coating, Bul. Tula St. Un. Tech. sc., 11, рр.153-163 (2017). [Google Scholar]
  16. V. Gadalov, I. Vornacheva, A. Filonovich, E. Filatov, D. Alymov, Forecasting the reliability of metal structures using statistical modeling methods, Sc. Life, 14 4, рр. 457-462 (2019). [Google Scholar]
  17. N. El-Tayeb, T. Yap, V. Venkatesh, P. Brevern, Modeling of cryogenic frictional behavior of titanium alloys using Response Surface Methodology approach, Mat. & Des. 30 10, рр. 4023–4034 (2009). [CrossRef] [Google Scholar]
  18. V. Gadalov, I. Vornacheva, I. Makarova, E. Filatov, E. Elnikov, R. Erokhin, Modernization of the process of electrospark alloying technology, Rep. Rec. Mod., 5, рр. 41-48 (2019). [Google Scholar]
  19. V. Gadalov, A. Filonovich, I. Vornacheva, M. Muratov, On the influence of electrospark alloying modes on the kinetics of mass transfer of the alloying electrode material on titanium alloys for steam turbine blades, Rep. Rec. Mod., 10, рр. 38-43 (2020). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.