| Issue |
MATEC Web Conf.
Volume 344, 2021
International Scientific and Practical Conference “Modern Problems and Directions of Development of Metal Science and Heat Treatment of Metals and Alloys, Dedicated to the Memory of Academician A. A. Baykov” (MPM 2021)
|
|
|---|---|---|
| Article Number | 01012 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/202134401012 | |
| Published online | 01 October 2021 | |
Features of the damping capacity of Mn – Cu alloys
Reshetnev Siberian State University of science and technologies, 660037 Krasnoyarsk, Russia
* Corresponding author: svetlanaginneh@rambler.ru
Data on the damping capacity of Mn – Cu alloys are adduced. The results of studying the influence of alloying elements, natural ageing at temperatures of 293 K, 273 K and 263 K on the stability of the damping capacity of Mn – Cu alloys are presented. The high damping capacity of Mn – Cu alloys decreases by 4 ... 6 times during natural ageing at 293 K, remains during 1,7 years of natural ageing at 273 K and 263 K. The analysis of factors that should be considered responsible for a sharp decrease in the damping capacity of Mn – Cu alloys during natural ageing is submitted.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.