| Issue |
MATEC Web Conf.
Volume 183, 2018
12th International Conference Quality Production Improvement – QPI 2018
|
|
|---|---|---|
| Article Number | 03005 | |
| Number of page(s) | 6 | |
| Section | Quality Management | |
| DOI | https://doi.org/10.1051/matecconf/201818303005 | |
| Published online | 31 July 2018 | |
The analysis of non-conformances as the way of assessment of quality of aluminium finishing strips in the selected company
Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Department of Production Management and Logistics, al. Armii Krajowej 19, 42-201 Czestochowa, Poland
* Corresponding author: ekonstan@wip.pcz.pl
The main purpose of the paper is the analysis of nonconformances of aluminium finishing strips in one of Polish companies. This kind of analysis may be one of the ways to assess the quality of products. In the first part of the paper qualitative analysis of nonconformances of strips was made using the Pareto chart, where 6 types of non-conformances were taken into account. In the second part of the paper the causes and effects of non-conformances of strips were assessed using FMEA method. This method showed that the biggest problem concerned the anodised coating of strips. In the last part of the paper the in-depth analysis of the causes of appearance of defects if anodising process using Ishikawa chart was made. All causes were discussed. The analysis takes into account the results collected in the company producing various types of strips. The analysis covers the period of two calendar years.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.