Applications of linear programming to optimize the cost-benefit criterion in production processes

Marek Krynke; Krzysztof Mielczarek

doi:10.1051/matecconf/201818304004

All issues

Volume 183 (2018)

MATEC Web Conf., 183 (2018) 04004

References

Open Access

Issue		MATEC Web Conf. Volume 183, 2018 12^th International Conference Quality Production Improvement – QPI 2018


Article Number		04004
Number of page(s)		6
Section		Management
DOI		https://doi.org/10.1051/matecconf/201818304004
Published online		31 July 2018

R. Ulewicz, M. Nowicka-Skowron, 26th International Conference on Metallurgy and Materials, Total Quality Management in practice of polish metallurgical companies (Tanger Ltd., Ostrava, 2017) [Google Scholar]
D. Klimecka-Tatar, Production Engeenering Archives, 17 (2017) [Google Scholar]
K. Knop, J. Rosak-Szyrocka, 25th Anniversary International Conference on Metallurgy and Materials, Evaluating and improving the effectiveness of the rolling mill in the production of medium steel sections in the selected company from the metallurgical industry (Tanger Ltd., Ostrava, 2016) [Google Scholar]
M. Zasadzień, Production Engeenering Archives, 11 (2016) [Google Scholar]
M. Afsharian, V.V. Podinovski, EJOR, 268 (2018) [CrossRef] [Google Scholar]
P. Saengudomlert, Optimization for communications and networks (Boca Raton, CRC Press, 2012) [Google Scholar]
A. Piechna, PiKI, 55 (2012) [Google Scholar]
S. Kreter, A. Schutt, P.J. Stuckey, EJOR, 266 (2018) [Google Scholar]
I. Azzini, R. Muresano, M. Ratto, CLS&S, 52 (2018) [Google Scholar]
S. Nagar, Introduction to Octave: For Engineers and Scientists (Apress, NewYork, 2018) [CrossRef] [Google Scholar]
N. Radek, J. Pietraszek, B. Antoszewski, Adv. Mat. Res.-Switz. 874, 29 (2014) [Google Scholar]
P. Szataniak, F. Novy, R. Ulewicz, 23^rd International Conference on Metallurgy And Materials, 778-783 (2014) [Google Scholar]
T. Lipinski, A. Wach, 23^rd International Conference on Metallurgy And Materials, 23^rd International Conference on Metallurgy And Materials, 778-783 (2014) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] R. Ulewicz, M. Nowicka-Skowron, 26th International Conference on Metallurgy and Materials, Total Quality Management in practice of polish metallurgical companies (Tanger Ltd., Ostrava, 2017) [Google Scholar]

[2] D. Klimecka-Tatar, Production Engeenering Archives, 17 (2017) [Google Scholar]

[3] K. Knop, J. Rosak-Szyrocka, 25th Anniversary International Conference on Metallurgy and Materials, Evaluating and improving the effectiveness of the rolling mill in the production of medium steel sections in the selected company from the metallurgical industry (Tanger Ltd., Ostrava, 2016) [Google Scholar]

[4] M. Zasadzień, Production Engeenering Archives, 11 (2016) [Google Scholar]

[5] M. Afsharian, V.V. Podinovski, EJOR, 268 (2018) [CrossRef] [Google Scholar]

[6] P. Saengudomlert, Optimization for communications and networks (Boca Raton, CRC Press, 2012) [Google Scholar]

[7] A. Piechna, PiKI, 55 (2012) [Google Scholar]

[8] S. Kreter, A. Schutt, P.J. Stuckey, EJOR, 266 (2018) [Google Scholar]

[9] I. Azzini, R. Muresano, M. Ratto, CLS&S, 52 (2018) [Google Scholar]

[10] S. Nagar, Introduction to Octave: For Engineers and Scientists (Apress, NewYork, 2018) [CrossRef] [Google Scholar]

[11] N. Radek, J. Pietraszek, B. Antoszewski, Adv. Mat. Res.-Switz. 874, 29 (2014) [Google Scholar]

[12] P. Szataniak, F. Novy, R. Ulewicz, 23^rd International Conference on Metallurgy And Materials, 778-783 (2014) [Google Scholar]

[13] T. Lipinski, A. Wach, 23^rd International Conference on Metallurgy And Materials, 23^rd International Conference on Metallurgy And Materials, 778-783 (2014) [Google Scholar]