| Issue |
MATEC Web Conf.
Volume 183, 2018
12th International Conference Quality Production Improvement – QPI 2018
|
|
|---|---|---|
| Article Number | 03008 | |
| Number of page(s) | 6 | |
| Section | Quality Management | |
| DOI | https://doi.org/10.1051/matecconf/201818303008 | |
| Published online | 31 July 2018 | |
Instruments of identification of hydraulic components potential failures
1
Cracow University of Technology, Institute of Applied Informatics, Al J. Pawla II 37, 31-841 Cracow, Poland
2
Western Norway University of Applied Sciences, Department of Mechanical and Marine Engineering, Inndalsveien 28, 5063 Bergen, Norway
* Corresponding author: fabis@mech.pk.edu.pl
This paper presents an analysis of potential failures of hydraulic components on the example of a hydraulic gear pump with the use of instruments of quality management. The “five why” method was implemented to evaluate failures as well as the bases for the causes which have an influence on pumps failures. The causes are connected with operation condition of gear pumps and the quality of working fluid. In the next step, by using a systematic diagram, appropriate improvement actions for the identified causes were determined.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.