| Issue |
MATEC Web Conf.
Volume 179, 2018
2018 2nd International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2018)
|
|
|---|---|---|
| Article Number | 03020 | |
| Number of page(s) | 10 | |
| Section | Aerospace | |
| DOI | https://doi.org/10.1051/matecconf/201817903020 | |
| Published online | 26 July 2018 | |
Investigation of Flow over the Airfoil NACA 0010-35 with Various Angle of Attack
Department of Mechanical Engineering, Engineering Faculty, University of Portsmouth, The United Kingdom
a Corresponding author: flora901120@gmail.com
This report is using the finite element analysis method to investigate the performance of an airfoil (NACA 0100-35), which uses 2D computational fluid dynamics simulations based on ANSYS to find the lift and drag coefficients under different conditions. The boundary conditions are defined as follows: The density is 1kg/m3, gauge pressure is 0, and airflow velocity is 50m/s. Also the Reynolds number is considered during the simulation. As a result, the simulation shows the stalling points and efficiencies of the airfoil under different angles of attack. The simulation also plots the contours and stream lines in these conditions.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.