| Issue |
MATEC Web Conf.
Volume 179, 2018
2018 2nd International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2018)
|
|
|---|---|---|
| Article Number | 02007 | |
| Number of page(s) | 6 | |
| Section | Materials | |
| DOI | https://doi.org/10.1051/matecconf/201817902007 | |
| Published online | 26 July 2018 | |
The Vortex Aircooler System for Cutting Materials in Aerospace Industry
1
- JSC «Salut», 20 km, Moskovskoeshosse, Samara, 443028, Russian Federation
2
- Samara National Research University34, Moskovskoeshosse, Samara, 443086, Russian Federation
a Corresponding author: dmitry.uglanov@mail.ru
In aerospace industry there is a situation, when it is not possible to use liquid cooling of cutting zone, because we have special material or special construction. How often in that case used air fluent, but it has some problems with life cycle tools, quality and cutting time. For solving these problems was use the vortex effect, it was open less than one hundred years ago. The unit for making vortex effect is could vortex tube. It was done the design the vortex tube of air cooler system for cutting using some researching [1-5]. Some experimental dates gave verification. The construction was made by metal materials and now is using on JSC «Salut», Samara..
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.