Open Access
Issue
MATEC Web Conf.
Volume 179, 2018
2018 2nd International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2018)
Article Number 01010
Number of page(s) 7
Section Mechanical
DOI https://doi.org/10.1051/matecconf/201817901010
Published online 26 July 2018
  1. Haag T W 1991 Thrust stand for high-power electric propulsion devices Review of Scientific Instruments vol 62 chapter 5 pp 1186-91 [CrossRef] [Google Scholar]
  2. Cubbin E, Ziemer J, Choueiri E and Jahn R 1997 Pulsed thrust measurements using laser interferometry Review of Scientific Instruments vol 68 chapter 6 pp 2339-46 [Google Scholar]
  3. Hallock A, Polzin K and Emsellem GD 2012 Thrust Stand Measurements of a Conical Pulsed Inductive Plasma Thruster [Google Scholar]
  4. Zakrzwski C, Benson S, Sanneman P and Hoskins A 2002 On-Orbit Testing of the EO-1 Pulsed Plasma Thruster [Google Scholar]
  5. Santoyo and Fernando Mendoza 1999 Simultaneous three-dimensional dynamic deformation measurements with pulsed digital holography Appl Opt vol 38 chapter 34 pp 7056-7062 [CrossRef] [Google Scholar]
  6. Vladimir K, Aleksander L, Viktor M, Amitriy T and Lev V S 2017 An estimation of the strain-stress state under cyclic loading by the acoustoelasticity method Physics and Mathematics vol 3 pp 71-6 [Google Scholar]
  7. Astm S 2010 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrument for Residual Stress Measurement [Google Scholar]
  8. Soete W and R Vancrombrugge 1950 An industrial method for the determination of residual stresses Proc. SESA vol 8 chapter 1 pp 17-28 [Google Scholar]
  9. Eiras J, Vu Q, Lott M, Payá J, Garnier V and Payan C 2016 Dynamic acousto-elastic test using continuous probe wave and transient vibration to investigate material nonlinearity Ultrasonics vol 69 p 29 [CrossRef] [Google Scholar]
  10. Si-Chaib M, Menad S, Djelouah H and Bocquet M 2001 An ultrasound method for the acoustoelastic evaluation of simple bending stresses Ndt and E International vol 34 chapter 8 pp 521-9 [CrossRef] [Google Scholar]
  11. Longhui Yin 2012 Ultrasonic stress measurement based on the LCR wave (in Chinese) [Google Scholar]
  12. Knapp C and Carter G 2003 The generalized correlation method for estimation of time delay Transactions on Acoustics Speech & Signal Processing vol 24 chapter 4 pp 320-7 [Google Scholar]
  13. Rose J and Nagy P 2004 Ultrasonic Waves in Solid Media Journal of the Acoustical Society of America vol 107 chapter 4 pp 1807-8 [CrossRef] [Google Scholar]
  14. Cuihua Zhao 2013 Study on ultrasonic measurement of resudial stresses (in Chinese) [Google Scholar]
  15. Haiquan Li, Lina Pan and Qingyan Liu 2000 Study and development of uitrasonic stress measurement system Journal of Test and Measurement Technology vol 22 chapter 7 pp 297-299 (in Chinese) [Google Scholar]
  16. Nikitina N and Ostrovsky L 1998 An ultrasonic method for measuring stresses in engineering materials Ultrasonics vol 35 chapter 8 pp 605-10 [CrossRef] [Google Scholar]
  17. Pao Y 1987 Theory of Acoustoelasticity and Acoustoplasticity [Google Scholar]
  18. Okada K 1981 Acoustoelastic determination of stress in slightly orthotropic materials Experimental Mechanics vol 21 chapter 12 pp 461-6 [CrossRef] [Google Scholar]
  19. Chaki S and G Bourse 2009 Stress level measurement in prestressed steel strands using acoustoelastic effect Experimental Mechanics vol 49 chapter 5 p 673 [CrossRef] [Google Scholar]
  20. Wei Zhao 2002 On Acoustoelasticity of Surface Acoustic Wave for Ultrasonic NDT [Google Scholar]
  21. Dike J, Johnson G and Flower E 1988 Acoustoelasticity Using Longitudinal Waves for Residual Stress Evaluation NDT and E International vol 28 p 118 [Google Scholar]
  22. Yaojie Huang 2015 Research on measurement method of welding residual stress in steel based on acoustoelasticity principle (in Chinese) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.