| Issue |
MATEC Web Conf.
Volume 179, 2018
2018 2nd International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2018)
|
|
|---|---|---|
| Article Number | 01014 | |
| Number of page(s) | 8 | |
| Section | Mechanical | |
| DOI | https://doi.org/10.1051/matecconf/201817901014 | |
| Published online | 26 July 2018 | |
Thermal Cycling Toughness and Strength Estimation of Cryogenic Filled Tank
Samara University, Department of Heat Engineering and Heat Engines, 443086, Moskovskoye shosse, 34, Samara, Russia
a Corresponding author: dmitry.uglanov@mail.ru
At present, technologies based on liquid natural gas (LNG) using start to find a wide use. They also demand technologies of working fluid storage and transportation in cryogenic liquid condition. The working fluid will be used after its regasification from cryogenic liquid condition. When the gas cylinder is filled with gas, there is a danger of exceeding the temperature stresses in the cylinder walls. For the study, there is a method for calculating unsteady thermal conductivity for studying the temperature stresses in the wall of a gas cylinder during its interaction with an evaporating cryogen. This method is used for determining the thermoelastic stresses of the cryogenic filled tank. The CAE- calculation of the strength of the cryogenic filled tank is also done.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.