Free Access to the whole issue

Open Access

About the conference

Published online: 01 July 2020

• PDF (76.5 KB)

Open Access

Statement of Peer review

Published online: 01 July 2020

• PDF (158 KB)

Open Access

Preface 00001

Valery Dyadichev

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031500001

• Abstract
• PDF (2.619 MB)

Materials Science and Physical Chemistry of Materials

Open Access

Conducting a microscopic analysis of the powders obtained by electroerosion dispersion of waste of steel X13 01001

E.V. Ageeva, S.V. Khardikov and A.N. Novikov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031501001

• Abstract
• PDF (611.3 KB)
• References

Open Access

X-ray diffraction analysis of electroerosive powder materials, obtained from waste of tungsten-free hard alloy grade KNT16 01002

Vladimir Serebrovsky and Boris Sabel’nikov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031501002

• Abstract
• PDF (1.926 MB)
• References

Open Access

The porosity study of sintered products from electro-erosive materials of alloy Cr17, obtained in lighting kerosene 01003

E.V. Ageev, A.S. Pereverzev and A. A. Sysoev

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031501003

• Abstract
• PDF (863.2 KB)
• References

Open Access

X-ray microanalysis of electro-erosive powder materials, obtained from tungsten-nickel-iron (TNI) alloy wastes in water 01004

E.V. Ageev, V.L. Selyutin and S.V. Pikalov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031501004

• Abstract
• PDF (317.6 KB)
• References

Open Access

Managing the crack energy dissipation as a way to increase the durability of fine-grained limestone concrete 01005

Vladimir Belov, Pavel Kuliaev and Temur Barkaya

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031501005

• Abstract
• PDF (2.210 MB)
• References

Open Access

Investigation of the effect of implantation with iron ions on the carbon content in the implanted layer of structural and instrumental materials 01006

Viktor Ovchinnikov, Elena Lukyanenko and Svetlana Yakutina

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031501006

• Abstract
• PDF (342.4 KB)
• References

Metallic Materials: Structure, Properties, Equipment

Open Access

Removal of residual stresses in aircraft structural elements by pulsating subsonic gas flows treatment 02001

Gennadiy Kovalenko and Denis Ivanov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031502001

• Abstract
• PDF (143.6 KB)
• References

Non-Metal Materials: Structure, Properties, Equipment

Open Access

Design of composite materials for clothes 03001

Sergey Koksharov, Nadezhda Kornilova and Yulia Shammut

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031503001

• Abstract
• PDF (2.217 MB)
• References

Open Access

The use of non-metal materials in the filler units of cooling towers with circulating water supply system 03002

Andrey V. Dmitriev, Ilnur N. Madyshev and Aliya I. Khafizova

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031503002

• Abstract
• PDF (2.096 MB)
• References

Open Access

Collecting finely-dispersed particles from the gas flow in a centrifugal separator with coaxially arranged pipes 03003

Vadim E. Zinurov, Oksana S. Dmitrieva and Oksana S. Popkova

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031503003

• Abstract
• PDF (1.948 MB)
• References

Open Access

The evaluation of possibilities of modern level casting bindings on the technological lignin basis practical appliance 03004

Yu.A. Svinoroev, V.V. Dyadichev, K.A. Batyshev, K.G. Semenov, A.V. Dyadichev, S.Ye. Chornobay and S.G. Menyuk

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031503004

• Abstract
• PDF (2.091 MB)
• References

Composite and Powder Materials

Open Access

Fracture features of dielectric nanoceramic with graphene by high-voltage discharge 04001

Aleksandr Kuznetsov, Georgii Savenkov and Vladimir Stolyarov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031504001

• Abstract
• PDF (116.6 KB)
• References

Open Access

Study of the inhibitory ability of inorganic di- and polyphosphate compositions 04002

Aktoty Niyazbekova, Timur Shakirov and Mayra Almagambetova

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031504002

• Abstract
• PDF (262.9 KB)
• References

Open Access

Continuous production of multicomponent powder mixtures 04003

Wasem Mansour, Denis Melekhin and Alexander Pasko

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031504003

• Abstract
• PDF (1.998 MB)
• References

Coating

Open Access

Effect of sol-gel solution parameters on the formation of films on the surface of carbon fibers 05001

Rida Gallyamova, Rustam Safiullin, Vladimir Dokichev and Fanil Musin

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031505001

• Abstract
• PDF (2.369 MB)
• References

Open Access

Investigation of the effect of ultrasonic surface treatment before ion implantation on the structure of the surface layer of aluminum alloy 1201 05002

Viktor Ovchinnikov, Irina Kurbatova and Nadezda Uchevatkina

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031505002

• Abstract
• PDF (1.913 MB)
• References

Nanomaterials

Open Access

Wear and friction dependence on grain size 06001

Vladimir Stolyarov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031506001

• Abstract
• PDF (787.1 KB)
• References

Open Access

The growth mechanism of ordered nanoporous alumina 06002

Marat Makhmud-Akhunov, Artem Adamovich and Igor Yavtushenko

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031506002

• Abstract
• PDF (2.095 MB)
• References

Open Access

Kinetics of liquid-phase shear exfoliation of graphite in synthetic oils 06003

Zaman A A Alhilo, Vladimir Pershin and Aleksey Osipov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031506003

• Abstract
• PDF (872.6 KB)
• References

Open Access

Rotor apparatus performance in the production of graphene-containing suspensions 06004

Ruaa A. Al-Jarah, Andrey Baranov and Anastasiya Pasko

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031506004

• Abstract
• PDF (2.081 MB)
• References

Open Access

Environmentally friendly technology for the modification of lubricants with graphene nanostructures 06005

Zaman A A Alhilo, Gaukhar Zhumagalieva and Tatiana Pasko

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031506005

• Abstract
• PDF (2.141 MB)
• References

Open Access

Improving functional and environmental performance of Portland cement-based materials by graphene nanostructures 06006

Vladimir Pershin, Ali Mashhadani, Denis Melekhin and Aleksey Osipov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031506006

• Abstract
• PDF (2.040 MB)
• References

Building Materials, Properties, Technologies, Equipment

Open Access

Analysis of structure-forming role of phosphogypsum in the production of nonfired cementless building composites 07001

Olga Kukina, Andrey Eremin and Dmitriy Shuvaev

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507001

• Abstract
• PDF (2.370 MB)
• References

Open Access

The deformability of the stress-strained concrete strips between the cracks during the short-term dynamic loading 07002

Zaur Galyautdinov, Oleg Kumpyak and Daud Galyautdinov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507002

• Abstract
• PDF (2.293 MB)
• References

Open Access

The study of the ferroconcrete beams with thrust on the foil bearings during short-term dynamic loading 07003

Oleg Kumpyak and Daud Galyautdinov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507003

• Abstract
• PDF (2.206 MB)
• References

Open Access

Two-layer reinforced concrete panels with uniformly compressed sections 07004

Dmitry Mailyan, Alik Blyagoz and Konstantin Kretinin

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507004

• Abstract
• PDF (1.898 MB)
• References

Open Access

Effective additive for foam concrete 07005

Vladimir Belov and Pavel Kuliaev

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507005

• Abstract
• PDF (1.950 MB)
• References

Open Access

Beneficiated ponded fly ash for concretes with high volume mineral additions 07006

Nikolai Zaichenko, Irina Petrik and Liudmila Zaichenko

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507006

• Abstract
• PDF (3.030 MB)
• References

Open Access

Development of a technology for producing ceramic refractory material in a composition of montmorillonite clays (bentonite-like) and ferrochrome production wastes 07007

Sarsenbek Montayev, Bekbulat Shakeshev and Sabit Zharylgapov

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507007

• Abstract
• PDF (2.116 MB)
• References

Open Access

On the possibility of using lime dust for the production of building materials of forced carbonate hardening 07008

Aleksandr Bakhtin, Nikolai Lyubomirskiy, Sergey Fedorkin and Tamara Bakhtina

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507008

• Abstract
• PDF (874.0 KB)
• References

Open Access

Use of glass granules to produce effective gypsum composites 07009

Victoria Petropavlovskaya, atiana Novichenkova and Kirill Petropavlovskii

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507009

• Abstract
• PDF (2.458 MB)
• References

Open Access

Studying the possibility of obtaining heat-insulating building materials based on lime carbonization hardening and rice husk 07010

Vitaliy Nikolaenko, Nikolai Lyubomirskiy, Elena Nikolaenko and Aleksandr Bakhtin

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031507010

• Abstract
• PDF (1.985 MB)
• References

Biological Materials: Structure, Properties, Technologies, Equipment

Open Access

The effect of biomineral composition on the biochemical parameters of animal blood 08001

Nurgul Montayeva

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031508001

• Abstract
• PDF (2.077 MB)
• References

Medical Materials: Structure, Properties, Technologies, Equipment

Open Access

The prospects of using the silver nanoparticles composition in sodium alginate matrix 09001

Anatoly Kubyshkin, Olga Pisareva, Yevgenia Bessalova and Irina Fomochkina

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031509001

• Abstract
• PDF (1.811 MB)
• References

Modeling the Structure, Properties of Materials

Open Access

Influence of pH liquid for mixing gypsum binders on the strength of gypsum composites 10001

Victoria Petropavlovskaya, Maria Zavadko and Tatiana Novichenkova

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031510001

• Abstract
• PDF (1.906 MB)
• References

Material Processing

Open Access

Analysis of radial-shear rolling process parameters of aluminum alloys based on FEM modeling 11001

Yury Gamin, Alexander Koshmin and Dinh Xuan Ta

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031511001

• Abstract
• PDF (2.144 MB)
• References

Open Access

Modeling of the stamping process of box-type forging 11002

Vagid Kadymov, Evgeny Sosenushkin and Elena Yanovskaya

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031511002

• Abstract
• PDF (1.789 MB)
• References

Theory and Technology of Welding Production

Open Access

Residual life assessment of welded joints in the girth weld root 12001

Leonid Shron, Vladimir Bogutsky, Elmar Yagyaev and Illa Tabolin

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031512001

• Abstract
• PDF (2.313 MB)
• References

Additive Technologies

Open Access

The study of the regularities of structure formation and properties of the L-PBF metal as a set of processes on the way to create a controlled structure 13001

Ivan Shakirov, Pavel Kuznetsov, Mikhail Staritsyn, Anton Zhukov and Vitaliy Bobyr

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031513001

• Abstract
• PDF (2.632 MB)
• References

Open Access

Single-Stage Polystyrene Concrete 3D Printing Technology 13002

Victor Molodin, Ivan Gasenko and Pavel Timin

Published online: 01 July 2020

DOI: https://doi.org/10.1051/matecconf/202031513002

• Abstract
• PDF (1.426 MB)
• References