Issue |
MATEC Web Conf.
Volume 315, 2020
International Scientific Practical Conference “Materials science, shape-generating technologies and equipment 2020” (ICMSSTE 2020)
|
|
---|---|---|
Article Number | 07010 | |
Number of page(s) | 5 | |
Section | Building Materials, Properties, Technologies, Equipment | |
DOI | https://doi.org/10.1051/matecconf/202031507010 | |
Published online | 01 July 2020 |
Studying the possibility of obtaining heat-insulating building materials based on lime carbonization hardening and rice husk
V.I. Vernadsky Crimean Federal University, 4 Academician Vernadsky, Simferopol 295007, Russian Federation
* Corresponding author: author@email.org
The paper presents studies of changes in the physicomechanical properties of samples based on lime-limestone compositions with rice husk filler hardening in an environment with a high concentration of carbon dioxide. The samples are semi-dry pressing cylinders made of a mixture of hydrated lime, ground limestone and a filler in the form of rice husk in order to reduce the density and increase the heat-insulation ability of building materials based on this raw material mixture. The studies showed that there is an increase in the strength of the samples due to the transition of portlandite to calcite during forced carbonization. The possibility of using waste products of plant origin by the example of rice husk in the production technology of heat-insulating building materials using artificial forced carbonization which will allow obtain products with the following characteristics: compressive strength 2.2 – 4.0 MPA at a density of 700 - 1200 kg/m³, thermal conductivity – 0.11-0.13 W/m•K, has been proved.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.