MATEC Web Conf.
Volume 315, 2020International Scientific Practical Conference “Materials science, shape-generating technologies and equipment 2020” (ICMSSTE 2020)
|Number of page(s)||7|
|Published online||01 July 2020|
Analysis of radial-shear rolling process parameters of aluminum alloys based on FEM modeling
Department of Metal Forming, National University of Science and Technology “MISIS”, 119049, 4 Leninskiy prospect, Moscow, Russia
* Corresponding author: firstname.lastname@example.org
This article presents the features of temperature change at different deformation-velocity parameters of radial-shear rolling process. Based on modeling the maps of temperature and strain rates distribution and zone of intensive heating are obtained. It is shown that with the elongation ratio μ≥1.5, the deformation heating increases more intensively at lower heating temperatures of the workpiece. The rods are obtained from 1050A alloy (Al99.5 %) with mechanical properties (UTS ~ 111 MPa, YS ~ 109 MPa, δ ~ 15%), reflecting the partially recrystallized structure.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.