| Issue |
MATEC Web Conf.
Volume 315, 2020
International Scientific Practical Conference “Materials science, shape-generating technologies and equipment 2020” (ICMSSTE 2020)
|
|
|---|---|---|
| Article Number | 05001 | |
| Number of page(s) | 6 | |
| Section | Coating | |
| DOI | https://doi.org/10.1051/matecconf/202031505001 | |
| Published online | 01 July 2020 | |
Effect of sol-gel solution parameters on the formation of films on the surface of carbon fibers
Ufa Institute of Chemistry UFRS RAS, 450054, Ufa, Russia
* Corresponding author: rida_gallyamova@mail.ru
In this study to apply an oxide film to the surface of carbon fibers a sol-gel solution was used. Sol-gel solutions were prepared according to the described procedure from tetraethoxysilane (TEOS) and ethanol at various H2O concentrations. The molar ratio H2O/TEOS ratio was changed in the range from 2 to 20. After coating and drying, the surface morphology of carbon fibers was investigated. The relationship between the concentration of sol-gel solutions and the amount of deposited SiO2 on the surface of carbon fibers was analyzed.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.